磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

Comparison of peak characteristics of F2 ionospheric layer over Tehran region at a low solar activity period with IRI-2001 and IRI-2007 models predictions

In the present work values of peak electron density (NmF2) and height of F2 ionospheric layer (hmF2) over Tehran region at a low solar activity period are compared with the predictions of the International Reference Ionosphere models (IRI-2001 and IRI-2007). Data measured by a digital ionosonde at the ionospheric station of the Institute of Geophysics, University of Tehran from July 2006 to June 2007 are used to perform the calculations. Formulations proposed by  and  are utilized to calculate the hmF2. The International Union of Radio Science (URSI) and International Radio Consultative Committee (CCIR) options are employed to run the IRI-2001 and IRI-2007 models. Results show that both IRI-2007 and IRI-2001 can successfully predict the NmF2 and hmF2 over Tehran region. In addition, the study shows that predictions of IRI-2007 model with CCIR coefficient has closer values to the observations. Furthermore, it is found that the monthly average of the percentage deviation between the IRI models predictions and the values of hmF2 and NmF2 parameters are less than 10% and 21%, respectively.     

基于有限元Craig缩聚模型的基础激励和载荷识别

载荷识别是用有限自由度的加速度测量值推断外力.基础激励是在基础自由度上加给定的加速度时间历程激振结构,求整个结构的动响应.利用Craig减缩模型的性质,及界面自由度的已知运动可求出整个结构其余自由度的动力学响应,完成基础激励求解.在此基础上用已知的界面自由运动和求得的非界面自由度的动力学响应,代入结构动力学方程即可实现载荷识别.本方法唯一能给基础激励和载荷识别结果带来的偏差是Craig缩聚模型与原始有限元模型间的差异,对此用频响分析的方式,直接从频响曲线的变化来确定缩聚模型的精度.算例表明这一新的基础激励和载荷识别途径是有效的.      

高精度UT1-UTC差分预报方法研究

针对卫星导航所需的高精度地球定向参数(EOP)中的UT1-UTC预报问题,提出了基于双差分LS+AR的UT1-UTC参数预报方法。对UT1-UTC观测数据进行跳秒检测、固体地球带谐潮汐项改正,然后对改正后的UT1-UTC数据进行双差分处理,增强数据平稳性;采用最小二乘拟合(LS)与自回归(AR)分析方法对差分处理后的数据进行分析与预报;对预报结果进行逆差分处理与潮汐项改正外推、跳秒恢复,获取高精度的UT1-UTC预报值。通过与国际EOP_PCC预报结果对比表明,UT1-UTC短期预报精度与EOP_PCC较优的预报精度相当,其中1天UT1-UTC预报精度优于0.03ms,优于EOP_PCC预报结果。介绍了北京航天飞行控制中心的UT1-UTC每日例行预报情况。     

基于深度增强学习的卫星姿态控制方法

针对卫星在执行丢弃载荷或捕获目标等复杂任务时遭遇的姿态突然发生变化的问题,采用深度增强学习方法对卫星姿态进行控制,使卫星恢复稳定状态。具体来说,首先搭建飞行器的姿态动力学环境,并将连续的控制力矩输出离散化,然后采用Deep Q Network算法进行卫星自主姿态控制训练,以姿态角速度趋于稳定作为奖励获得离散行为的最优智能输出。仿真试验表明,面向空间卫星姿态控制的深度增强学习算法能够在卫星受到突发随机扰动后稳定卫星姿态,并能有效解决传统PD控制器依赖被控对象质量参数的难题。所提出的方法采用自主学习的方式对卫星姿态进行控制,具有很强的智能性和一定的普适性,在未来卫星执行复杂空间任务中的智能控制方面有着很好的应用潜力。     

基于卷积盲分离的强干扰下通信信号分离算法

针对目前通信辐射源个体识别算法在实际试验中由于各类干扰信号和多径衰落导致识别率较低的问题,提出一种用于识别算法前端的信号分离算法,可有效地减少其他电磁信号对于识别算法输入信号的影响,从而提高在复杂电磁环境中通信辐射源个体识别的正确识别率。该算法将灾变策略和搜索状态的自适应引入量子粒子群算法,通过对混合信号的联合对角化从截获的观测信号中提取出目标通信辐射源的有用信号。为了更加系统、直观地衡量算法的分离效果,提出分离熵来量化算法的整体性能。仿真结果表明,该分离算法可以把目标通信辐射源的有用信号从复杂电磁环境中提取出来,从而提高通信辐射源个体识别在复杂电磁环境中的正确识别率,具有较好的可行性和有效性。     

利于减少配平损失的太阳能飞机构型设计

针对具有静稳定性的太阳能飞机一般采用尾翼配平造成气动配平损失的问题,提出了一种“T”构型太阳能飞机。概述该太阳能飞机的总体构型,分析该构型飞机巡航状态下降低重心的自配平原理,建立能量平衡和质量分析模型,给出适合于该构型太阳能飞机的概念设计方法,并优化构型设计参数。结果表明,“T”构型太阳能飞机不仅具有静稳定性,还降低了配平损失。在巡航状态下,“T”构型太阳能飞机单位面积平飞需用功率比常规构型太阳能飞机减少了6.2%,具有明显的应用效果。      

一种基于Hausdorff距离的改进星图识别方法

针对基于Hausdorff距离HD(Hausdorff Distance)识别法存在识别速度慢和对星敏感器镜头旋转特别敏感的问题,提出了一种基于Hausdorff 距离进行星图识别的改进算法,它采用有向距离和绝对距离相结合的方法,利用恒星的空间结构信息,构建有向距离匹配模型;根据镜头旋转特性,建立绝对距离抗旋转模型;对两种模型测试研究确定加权因子,同时选取恰当的匹配识别门限,最终实现匹配识别的性能达到最优.仿真实验结果表明,改进后的算法不但保持了原有算法的高识别率,强抗噪性,而且还具有更快的识别速度和好的抗旋转特性.它在实际工程中已得到成功应用.      

The effective temperatures of O-type stars from UV spectroscopy

We present an analysis of high resolution spectra in the far-UV – UV range (∼905–2000 Å) with non-LTE, spherical, hydrodynamical, line-blanketed models, of three O-type Galactic stars, and derive their photospheric and wind parameters. These data extend previously analyzed samples and fill a gap in spectral type coverage. The combined sample confirms a revised (downward) T_eff scale with respect to canonical calibrations, as found in our previous works from UV and optical spectra, and in recent works by other authors.     

Stability of the seasonal variations in diurnal and semidiurnal components of mid-latitude F2 layer parameters

We report work utilizing 15-min resolution ionospheric data obtained with DPS-4 digisonde in 2003–2011 to study the seasonal variations in amplitudes and phases of the most powerful spectral components of the F2 layer critical frequency (foF2) and peak height (hmF2) fluctuations over Irkutsk (52.5°N, 104.0°E). We show that fluctuations of both parameters contain quasi-harmonic components with periods of T_n = 24/n h (n = 1–7). The number of distinct spectral peaks varies from 3 in summer to 7 in winter. Amplitude and phase characteristics of the diurnal (n = 1) and semidiurnal (n = 2) components is studied using the data sets extracted from the original data sets with band-pass filter. It has been found that the amplitudes of diurnal/semidiurnal foF2 and diurnal hmF2 components are maximum in winter and minimum in summer. Amplitudes of the diurnal components vary gradually; those of the foF2 semidiurnal one, abruptly, thus forming a narrow winter maximum in November–January. The phase (local time of maximum) of the diurnal foF2 component increases gradually by 4–6 h from winter to summer. The phase of the semidiurnal foF2 component is nearly stable in winter/summer and sharply decreases (increases) by 2–3 h near the spring (autumn) equinox. The phase of the diurnal component of hmF2 (local time of minimum) varies slightly between 1130 and 1300 LT; that of the semidiurnal one decreases (increases) by 4–6 h from January to March (from September to November). The results obtained show that the main features of seasonal variations in the diurnal and semidiurnal components of the mid-latitude F2 layer parameters recur consistently during the solar activity growth and decline phases.