民机数据总线信号综合测试仪

介绍的民机数据总线信号测试仪综合了当前民机上主要采用的ARINC429、ARINC419、CSDB和RS232等数字式航空数据总线规范的接口，具有和这些总线接口设备通讯的能力，可以灵活方便地应用于机载设备检测，装机交联实验当中。     

TiAl合金不同钛铝比层片组织的稳定性

对钛铝比为１．１７４、１．１０５和１．０４１的（ＴｉＡｌ）－２．５Ｖ－１Ｃｒ（ａｔ％）合金层片组织在１３２３Ｋ热暴露中的组织变化进行了观察和分析。发现钛铝比对ＴｉＡｌ合金层片组织的稳定性和失稳分解机理有重要影响，钦铝比适当大于１：１（如１．１０５）的合金可以得到稳定性更好的层片组织。     

靶场测控通信系统可靠性分析

首先确定了测控通信系统可靠性分析框架，然后针对系统构型为串并联系统、试验信息为成败型数据／寿命型数据的情况，研究了可靠性信息融合的Bayes方法，最后讨论了系统可靠性的Bayes统计推断问题，包括点估计、置信估计和假设检验。     

基于FW-H方程的旋翼气动声学计算研究

由流体力学N S方程导出的非齐次波动方程———FfowcsWilliams Hawkings方程(简称FW H方程),可以精确地描述在静止流体中运动的物体与流体相互作用的发声问题。以FW H方程为理论模型,将旋翼桨叶运动发声问题等效为包含桨叶的任意运动控制面(声源面)的声辐射问题,并在旋翼绕流Euler方程数值模拟的基础上,在时域内计算了悬停旋翼和前飞旋翼的声场。应用于UH 1H和AH 1/OLS两种旋翼模型的气动声学计算表明:计算结果与噪声实验值符合良好;所研制的程序不仅能够较准确地计算单极子噪声和偶极子噪声,而且具有较强的跨音速四极子噪声预测能力。     

农林飞机结构抗坠毁设计技术

农林飞机通常在3-5m的超低空进行作业飞行,在离地面3m以上的空中往往会有树木、电线杆、电线、堤坝、土堆、山丘、建筑物等障碍物,稍有不慎,就有与之撞击的可能。这样的工作条件除要求飞机具有良好的超低空飞行性能以外,还要求飞机具有一定的耐坠撞能力。本文针对农林飞机执行任务过程中可能发生的碰撞、坠毁等特点,研究了农林飞机抗坠毁设计技术、计算分析仿真技术。     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

一个通用的微型飞行器气动工程估算环境的开发

针对微型飞行器 (MicroAirVe hicle,简称MAV)多学科设计优化的需要 ,本文以MAV工程估算的三层模型描述为基础 ,开发了一个通用的MAV气动工程估算程序 ,它可以对多种布局MAV进行气动参数的计算 ,并且MAV几何外形的描述简单 ,计算方便正确 ,最后对某MAV的气动估算结果与风洞实验曲线进行了比较。     

跨声速粘性流绕振荡翼型的非定常计算

本文采用时间和穴是二阶精度的Ｂｅａｍ－Ｗａｒｍｉｎｇ格式和Ｂａｌｄｗｉｎ－Ｌｏｍａｘ代数湍流模式及ｑ－ω二方程微分模式，结合网格自适应技术，数值模拟Ｎ－Ｓ方程，计算了跨声速下的翼型非定常运动，包括俯仰，浮沉和前后平移振荡。结果表明，压力分布和气动系数与实验基本符合，微分模式和自适应网格能够显著提高激波和边界层计算精度。     

亚,超声速旋涡流动特征的定性分析研究

本文研究了沿其轴向运动的亚声速和超声速旋涡的性状，指出两者完全不同。在加速区，于涡轴附近，亚声速旋涡的横截面流线即横截面上的速度场的向量线为由外向内转的稳定螺旋点形态，空间流线沿其轴向是收缩的，而超声速旋涡的横截面流线为由内向外转的不稳定螺旋点形态，空间流线沿其轴向是散开的。在减速区，两者的情况也恰好相反，此外，当旋涡由加速区过渡到减速区时，两者横截面流线方程在涡轴附近的Ｈｏｐｆ分叉情况也不同，亚     

自适应直角切割网格民机增升装置绕流数值模拟

提出并介绍了基于直角切割网格的分区面搭接技术,采用变长宽比网格方法,成功地进行了存在外形间断(剪刀叉)的民机增升装置的网格生成和绕流Euler方程数值模拟.根据外形的特点,运用"根"网格分区算法,降低了整个网格的生成难度;通过基于外形的自适应网格加密技术,详细地描述了外形上的大量缝道和凹槽,提高了网格质量;在分区交界面上,利用重叠面积切割和面搭接算法实现了两侧网格间的流场信息传递,并保证了通量守恒;采用中心有限体积方法,结合双时间推进算法,完成流场的Euler方程数值模拟,计算结果与实验数据吻合良好,说明所述方法的正确性.