液体煤油超声速燃烧数值分析的湍流模型

利用计算流体力学软件对煤油在所设计的双模态燃烧室内的喷雾燃烧进行了数值模拟。采用k-ε三种形式、k-ω两种形式和雷诺应力湍流模型,计算了在飞行马赫数为5,煤油与空气的当量比为0.551时的情况。通过将数值模拟结果与实验数据进行对比,证明这些湍流模型都可用于煤油超声速燃烧的数值计算。并且,k-εRNG模型和k-ωSST模型的计算结果与实验数据最为接近,可以认为这两个模型在模拟煤油超声速燃烧流场中是非常有效的;而雷诺应力模型效果较差。     

无动量亏损尾迹的实验研究

采用尾缘吹气的流动控制技术,改善静子尾迹区流动.使用热线风速仪对静子尾迹区在不同吹气量下的轴向速度进行了测量,得到了在纯尾迹、弱尾迹、无动量亏损尾迹和射流这4种工况下尾迹区的轴向速度分布、中心点速度频谱图以及尾迹特征长度沿流动方向的变化.实验测量结果表明,无动量亏损尾迹和纯尾迹工况相比改善了静子出口速度的均匀性,并改变了涡脱落特性.无动量亏损尾迹特征长度与x0.35成正比关系,而纯尾迹时的特征长度沿轴向与x0.37成正比关系变化.     

Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China

Recently, the development of modern vehicles has brought about aggressive integration and miniaturization of on-board electrical and electronic devices. It will lead to exponential growth in both the overall waste heat and heat flux to be dissipated to maintain the devices within a safe temperature range. However, both the total heat sinks aboard and the cooling capacity of currently utilized thermal control strategy are severely limited, which threatens the lifetime of the on-board equipment and even the entire flight system and shrink the vehicle’s flight time and range. Facing these thermal challenges, the USA proposed the program of “INVENT” to maximize utilities of the available heat sinks and enhance the cooling ability of thermal control strategies. Following the efforts done by the USA researchers, scientists in China fought their ways to develop thermal management technologies for Chinese advanced energy-optimized airplanes and spacecraft. This paper elaborates the available on-board heat sinks and aerospace thermal management systems using both active and passive technologies not confined to the technology in China. Subsequently, active thermal management technologies in China including fuel thermal management system, environment control system, non-fuel liquid cooling strategy are reviewed. At last, space thermal control technologies used in Chinese Space Station and Chang’e-3 and to be used in Chang’e-5 are introduced. Key issues to be solved are also identified, which could facilitate the development of aerospace thermal control techniques across the world.     

Towards intelligent design optimization: Progress and challenge of design optimization theories and technologies for plastic forming

Plastic forming is one of enabling and fundamental technologies in advanced manufacturing chains. Design optimization is a critical way to improve the performance of the forming system, exploit the advantages of high productivity, high product quality, low production cost and short time to market and develop precise, accurate, green, and intelligent (smart) plastic forming technology. However, plastic forming is quite complicated, relating to multi-physics field coupling, multi-factor influence, multi-defect constraint, and triple nonlinear, etc., and the design optimization for plastic forming involves multi-objective, multi-parameter, multi-constraint, nonlinear, high-dimensionality, non-continuity, time-varying, and uncertainty, etc. Therefore, how to achieve accurate and efficient design optimization of products, equipment, tools/dies, and processing as well as materials characterization has always been the research frontier and focus in the field of engineering and manufacturing. In recent years, with the rapid development of computing science, data science and internet of things (IoT), the theories and technologies of design optimization have attracted more and more attention, and developed rapidly in forming process. Accordingly, this paper first introduced the framework of design optimization for plastic forming. Then, focusing on the key problems of design optimization, such as numerical model and optimization algorithm, this paper summarized the research progress on the development and application of the theories and technologies about design optimization in forming process, including deterministic and uncertain optimization. Moreover, the applicability of various modeling methods and optimization algorithms was elaborated in solving the design optimization problems of plastic forming. Finally, considering the development trends of forming technology, this paper discusses some challenges of design optimization that may need to be solved and faced in forming process.     

高拱坝失效模式与失效概率

为克服高拱坝确定性安全评价中不考虑随机性、不进行风险分析的弊端,提出研究超静定结构高拱坝的失效模式、利用失效概率与失效风险值对高拱坝进行风险评价。在分析洪水、地震和材料老化等造成高拱坝失效原因的基础上,利用故障树分析法探索出高拱坝具有失稳溃坝、剪滑垮坝、超量开裂以及人为毁坝等4种主要失效模式;从产生载荷参数随机数、获取随机变量的分布规律和建立失效模式的状态函数等方面研究了高拱坝单个失效模式与系统失效概率的计算方法。计算了某高拱坝剪滑失效模式的失效概率。     

连续小波变换应用于密集模态参数识别

用连续小波变换方法进行模态参数识别时,减小小波函数的带宽可以提高小波变换的频率分辨能力,但同时也会增大边沿效应,影响密集模态参数识别的精度。本文提出了极值位置方法,在模态耦合严重的小波脊附近,找到模态解耦最好的尺度,在此尺度上进行频率和阻尼的识别,可以获得较好的识别精度。使用Morlet小波函数,对GARTEUR飞机模型中的三阶密集模态进行识别,验证了该方法的有效性。     

基于多agent合作博弈的制造系统调度

针对有多个加工和装备设备的柔性制造系统,提出了一种调度方法.首先根据产品装配结构对问题进行分解,得到多个易于调度的简单问题,形成对应的agent.然后应用合作博弈理论,根据各agent重要性和装配约束获得agent的排序.以此顺序在机器上按照规则进行生产安排,故能够得到满足产品加工约束的近似最优调度结果.最后通过实验对算法进行了验证.     

机场地面容量评估研究

提出基于滑行路径动态寻优的机场地面容量评估方法。对于结构复杂多样的机场地面,当跑道、滑行道和停机位使用情况和航班流变化时,根据机场地面运行的具体特点,首先建立机场地面有向网络模型,引入滑行道的权值概念,再通过D ijkstra算法进行动态路径寻优,并与冲突探测相结合,对滑行道和停机位进行合理分配。最后通过计算机仿真来评估容量。仿真实例表明,该方法不仅可以增强机场地面容量评估的灵活性和准确性,还可以应用于机场地面交通引导。     

航改燃气轮机燃烧室故障模式、影响及危害性分析

为提高航改燃机燃烧室可靠性及使用安全性,在设计阶段对某型中等功率航改燃气轮机燃烧室进行故障模式、影响及危害性分析（FMECA）。根据燃烧室结构组成,建立硬件层次及可靠性逻辑框图。针对燃烧室机匣、火焰筒、燃油总管、燃油喷嘴、导流罩等零部件进行故障模式分析,指出可能发生故障的原因及其影响,并有针对性地提出改进措施。根据各零部件发生故障的概率及严重程度建立危害性矩阵,找出系统的薄弱环节,得到FMECA表。结果表明：火焰筒壁面掉块及燃油总管焊缝开裂是影响燃烧室性能及使用安全性的主要因素,应采取相应措施降低其发生概率及严重程度,同时指出对于发生概率及严重程度较低的故障可以适当降低其设计成本。运用FMECA表客观地找出系统薄弱环节,为后续燃烧室维护及测试提供参考。     

有声腔推力室的声学振型及其阻尼特性研究

为确定多声学模态压力振荡条件下带有1/4波长管声腔推力室的声学振型及其阻尼特性,揭示1/4波长管声腔对推力室压力振荡的抑制作用机理,对有声腔推力室和无声腔推力室进行近圆周壁面的定容弹激励仿真,激发了多模态的声学振型,给出了推力室压力分布的时空演化,并采用半带宽法定量评价每个激发声学振型的阻尼特性.结果表明:1/4波长管...