关于 3D和2D型SPin态的拓扑分类的注记

对铁磁体中的Ｓｐｉｎ态进行拓扑分类在物理学上有重要意义。本文用代数拓扑学中的Ｍａｙｅｒ－Ｖｉｅｔｏｒｉｓ正合序列计算了一类空间区域Ω的第一、二个整系数上同调,从而对占据该区域的铁磁体的３Ｄ和２Ｄ型Ｓｐｉｎ态进行了拓扑分类,这里所论的铁磁体中含有若干环状和穿过其中的柱状空腔,而且环状空腔可以是互相缠绕的。最后还讨论了这类铁磁体中的矢量场和标量场的某些全局性质。     

A non-local vectorial total variational model for multichannel SAR image speckle suppression

This paper aims at the multichannel synthetic aperture radar(SAR)image speckle reduction.This paper proposes a novel energy minimized regularization model for multichannel image denoising,which is an extension of the non-local total variational model for gray-scale image.It contains two terms,namely the vectorial data fidelity term and the non-local vectorial total variation term.The latter is constructed by high-dimensional non-local gradient that contains the structure information of the multichannel image.The existence and the uniqueness of the solution of the model are proved.A fixed point iterative algorithm is designed to acquire the solution of this model.The convergence property of this algorithm is proved as well.This model is applied to the multipolarimetric and multi-temporal RADARSAT-2 images despeckling.The result shows that this model performs better than the original vectorial total variational model on texture preserving.     

非列紧空间的一般非扩张映象的Ishikawa迭代序列

本文证明了Hilbert空间上的非列紧的一般非扩张映象的Ishikawa迭代序列的收敛性。     

Excel在数值计算中的应用

本文介绍了用Excel电子表格解决数值计算中的计算问题，并用图表形式表示出运算结果。     

基于EAB资源的交织编译码器的设计与实现

提出了一种新的基于EAB资源交织编译码设计方案，利用FPGA技术实现了数字通信中交织器和解交织器，构建了具体的算法模型，并说明了设计中实际产生的问题及解决方法。     

直扩测控系统抗多址能力分析与验证

为了防止多址干扰造成接收机出现误捕和假锁,改善直接序列扩频测控系统抗多址干扰性能,在Gold码特性和扩频接收机性能分析的基础上,结合最大似然原理,对采用扩频体制测控系统的抗干扰能力进行了分析。为契合工程应用,采用仿真遍历结合理论分析的方式,对Gold码的互相关抑制能力理论值进行了工程修正。在分析捕获阶段的抗干扰捕获门限后,还分析了载噪比估计结果在正常锁定和假锁两种状态下的差异,给出了接收机对假锁状态的判决方法和门限。根据分析和仿真的结果,给出了系统设计约束条件和优化的接收机设计流程,作为测控系统和接收机设计的参考。     

凸轮逆序测量方法

目前各杂志所发表的关于凸轮测量的文章，所讨论的均是凸轮的顺序测量方法，有关凸轮的逆序测量(反求工程)方法，尚未见于文字。本文将对凸轮的逆序测量方法进行探讨。     

算术平均序列的收敛性

下述命题是熟知的:假设 {x_n)_(n=1)~∞是一数列且x_n=a 则1/n x_=a,并且我们知道它的逆命题是不真的。本文给出两个定理和两个推论,定理1断言S_n=1/nx_i 收敛于 a 和 b 的某种组合,这里 a 是(x_n)的子列极限,b 亦如此。在定理2中我们给出1/nx_i=0的一个充要条件,两个推论也是有趣的。     

Energy principle and material removal sequence optimization method in machining of aircraft monolithic parts

In the machining process of aircraft monolithic parts, the initial residual stress redistribution and structural stiffness evolution often lead to unexpected distortions. On the other hand, the stress redistribution and stiffness reduction during the machining process depend on the material removal sequence. The essence of the stress redistribution is releasing the initial elastic strain energy. In the present study, the influence of the material removal sequence on the energy release is studied. Moreover, a novel optimization method is proposed for the material removal sequence. In order to evaluate the performance of the proposed method, the mechanism of the machining distortion is firstly analyzed based on the energy principle. Then a calculative model for the machining distortion of long beam parts is established accordingly. Moreover, an energy parameter related to the bending distortion and the procedure of the material removal sequence optimization is defined. Finally, the bending distortion analysis and material removal sequence optimization are performed on a long beam with a Z-shaped cross-section. Furthermore, simulation and experiments are carried out. The obtained results indicate that the optimized sequence results in a low distortion fluctuation and decreases the bending distortion.     

图像序列中机动目标三维运动和结构的计算

综合视觉运动分析中的2类处理方法,选取图像中的角点作为特征点,在理论上证明了图像序列的光流场可以近似地用角点的位移场代替。利用已有文献中的建模思想,详细推导出递归计算机动目标三维运动和结构的非线性计算模型,采用广义卡尔曼滤波(EKF)递归地计算图像序列中机动目标的三维运动和结构。合成图像序列和真实图像序列实验结果表明该算法能取得较好的效果。