仿生减阻翼型的气动性能

利用一种基于滑移边界理论的仿生肋条结构的模化方法,对仿生减阻翼型的气动性能开展了数值模拟研究.结果 显示:肋条结构同时布置在翼型压力面和吸力面湍流区域时,仿生减阻翼型的阻力可降低1.73％～3.07％,升阻比可提高2.10％～4.08％,其中黏性阻力的减小是总阻力下降的主要原因.对流场分析表明,仿生减阻翼型的速度曲线出...     

A tip clearance prediction model for multistage rotors and stators in aero-engines

Tip clearances of multistage rotors and stators greatly affect aero-engines’ aerodynamic efficiency, stability and safety. The inevitable machining and assembly errors, as well as the complicated error propagation mechanism, cause overproof or non-uniform tip clearances. However, it is generally accepted that tip clearances are difficult to predict, even under assembly state. In this paper, a tip clearance prediction model is proposed based on measured error data. Some 3D error propagation sub-models, regarding rotors, supports and casings, are built and combined. The complex error coupling relationship is uncovered using mathematical methods. Rotor and stator tip clearances are predicted and analyzed in different phase angles. The maximum, minimum and average tip clearances can be calculated. The proposed model is implemented by a computer program, and a case study illustrates its performance and verifies its feasibility. The results can be referred by engineers in assembly quality judgement and decision-making.     

一种电离层TEC格点预测模型

基于分析时间序列数据的门限控制单元（GRU）神经网络模型,利用电离层TEC网格点历史数据、太阳活动指数、地磁活动指数作为预测因子,提出一种高精度电离层TEC格点预测模型.对全球60个网格点的数据进行了模型预测和对比实验,得到北半球平均相对精度的均值为83.96%,高于南半球的73.60%,表明预测模型在北半球的适应性更好,且中低纬地区的适应性优于高纬地区;预测模型在磁扰动期的平均相对精度的均值比磁平静期平均相对精度的均值高,约1.95%;与基于递归神经网络（RNN）、长短时记忆网络（LSTM）和双向长短时记忆网络（Bi-LSTM）的电离层TEC单站预测模型相比,本文预测模型的均方根误差（RMSE）平均为原来的80.8%.     

基于T-S模糊模型的模糊大系统的混合滤波

针对非线性大系统内部过程参数的检测估计,采用连续模糊大系统模型,利用lyapunov定理和分布式处理方法,给出了模糊大系统的H2/H∞混合滤波器设计方法。该方法在保证滤波误差系统全局稳定的同时,具备了H2/H∞性能。通过求解线性矩阵不等式,可以得到滤波器参数。最后,用一个数值例子验证了该方法的正确性和有效性。     

Geometric calibration of Colour and Stereo Surface Imaging System of ESA’s Trace Gas Orbiter

There are many geometric calibration methods for “standard” cameras. These methods, however, cannot be used for the calibration of telescopes with large focal lengths and complex off-axis optics. Moreover, specialized calibration methods for the telescopes are scarce in literature. We describe the calibration method that we developed for the Colour and Stereo Surface Imaging System (CaSSIS) telescope, on board of the ExoMars Trace Gas Orbiter (TGO). Although our method is described in the context of CaSSIS, with camera-specific experiments, it is general and can be applied to other telescopes. We further encourage re-use of the proposed method by making our calibration code and data available on-line.     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

A regional tropospheric model for airborne GPS applications

A regional tropospheric model can be constructed using surveys from GPS ground networks. Using this model the tropospheric delays of a kinematic station within the region can be interpolated. However, such a model is generally not suitable for an airborne platform high above the ground networks. In this paper, a method of constructing a regional tropospheric model for airborne GPS applications is described. First, the kinematic station in the air is projected onto the ground. Then the tropospheric delays at projected point are interpolated from those of the ground networks. Finally, the tropospheric delays at projected point are extended upward to the airborne platform using pressure and temperature gradients and humidity exponential function. For validation of this method, the data of airborne campaign carried out by BKG in cooperation with GFZ and BGR 2008 in the northern Alps are used. The results show that GPS kinematic positioning precision in height component can be improved using this method.     

几种生长模型参数的最小二乘估计方法及应用

提出一种Logistic模型、Gompertz模型、Mitscherlich模型和Bertallanffy模型的分布参数估计方法，这种方法以加权最小二乘法为基础，推导求解分布参数的方程组。利用这类曲线模型中参数形式的特点，使同时求解三个参数的问题简化为同时求解两个参数的问题，并给出求解参数耦合方程组的二重二分迭代法。预测地基沉降的计算实例表明，这种方法对于迭代初值的选取要求较低、求解速度快、精度高，而且通过选取权因子可以对已有数据实现“重近轻远”的处理。     

消费者创新性对手机银行使用意愿的影响研究

探索消费者创新性对手机银行使用意愿的影响,基于技术接受模型,构建了消费者创新性影响手机银行使用意愿的假设模型,依据假设模型开展了问卷调查。通过AMOS17.0软件对调查数据和假设模型进行了结构方程模型检验。研究结果表明,消费者创新性对手机银行使用意向具有显著影响,其影响机制是通过消费者对手机银行易用性和有用性的感知影响消费者对手机银行的使用态度,进而影响手机银行使用意向。在此基础上对商业银行发展手机银行提出了实践建议。     

军用飞机型号研制试飞费用估算研究

在借鉴国外经验的基础上,对国内军用飞机型号研制试飞费用的构成进行了研究,提出基于兰德DAPCA IV模型的军用飞机型号研制试飞费用估算模型,为试飞费用的估算提供了依据。