基于H∞最优化与层次结构动态逆的非线性飞行控制器设计

针对扰动环境下的导弹飞行控制问题提出一种基于H∞最优化与层次结构动态逆(HSDI)的鲁棒非线性控制方法.设计层次结构动态逆控制器时将层次结构优化为3层,并按照时标分离的思想调整了各层次的状态变量,使得控制器更为简洁.在此基础上,将层次结构动态逆控制器与导弹6自由度(DOF)非线性模型联合作为H..控制的广义被控对象,通...     

Inversion of satellite gradiometry data using statistically modified integral formulas for local gravity field recovery

The satellite gravity gradiometric data can be used directly to recover the gravity anomaly at sea level using inversion of integral formulas. This approach suffers by the spatial truncation errors of the integrals, but these errors can be reduced by modifying the formulas. It allows us to consider smaller coverage of the satellite data over the region of recovery. In this study, we consider the second-order radial derivative (SORD) of disturbing potential (T_rr) and determine the gravity anomaly with a resolution of 1° × 1° at sea level by inverting the statistically modified version of SORD of extended Stokes’ formula. Also we investigate the effect of the spatial truncation error on the quality of inversion considering noise of T_rr. The numerical investigations show satisfactory results when the area of T_rr coverage is the same with that of the gravity anomaly and the integral formula is modified by the biased least-squares modification. The error of recovery will be about 6 mGal after removing the regularization bias in the presence of 1 mE noise in T_rr measured on the orbit.     

地外二氧化碳转化利用技术研究现状与展望

为有效解决未来长期载人地外生存面临的物资供给等关键问题,获得更高的氧回收率、能量转化效率和更低的应用成本,亟须发展更高效的地外二氧化碳转化利用技术。文章总结了地外二氧化碳利用的发展现状并分析了近期的研究进展,发现不同技术之间差异大,在航天应用过程中,需充分考虑地外环境限制因素,以选用更合适的技术。空间站上已搭载的Sabatier装置和火星车上的MOXIE装置初步实现了地外二氧化碳还原。以“地外人工光合成”为代表的常温二氧化碳转化技术可为地外环控生保提供新路线。其不仅能够实现地外氧气供给,还可获得甲酸、乙烯和甲烷等有机分子作为燃料或生物转化原料。随着相关基础研究的不断发展,有望实现二氧化碳的高效转化和高附加值有机物、甚至碳糖食物的生产。地外二氧化碳转化利用技术的发展,将实现地外密闭环境下的废弃资源利用与物质循环,降低载人空间站、载人深空飞船的物资供应需求,也将为原位资源利用火星大气中的二氧化碳提供创新思路,以支撑未来可承受、可持续的地外生存任务。     

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

The thermal and dimensional stability of epoxy resin (EP) in-situ modified by cyanate ester (CE) and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy (FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40% CE makes the blending system exhibit the lowest initial decomposition temperature, which reduces by 15.5% and 40.8% compared with pure EP and CE, respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80% CE shows the lowest volume shrinkage of 6.11%. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80% CE into EP results in the lowest thermal stress in the blending system, which indicates that the system has the lowest volume shrinkage, which agrees well with the experimental results.     

SVM最优分类面相对位置的修正

通过放宽标准支持向量机(SVM,Support Vector Machines)中类别边界至分类面等间隔的约束,保持两类函数间隔之和不变的条件,在支持向量机思想框架下得出分类面依样本分布进行调整的新型支持向量机,其对偶形式与标准支持向量机完全相同,从而在理论上进一步完善了支持向量机.在此基础上,提出使类别的函数间隔正比于样本标准差的具体算法--方差修正法,达到最优分类面的相对位置依样本方差而调整之目的.从统计意义上来说,方差修正法在分类精度上有所提高,但计算量增加不多.     

微等离子体转化二氧化碳发射光谱诊断

火星大气层的主要成分为二氧化碳,如果能够利用低温等离子体方法高效分解二氧化碳,使其转化为氧气和一氧化碳加以利用,可以大幅降低航天员生命保障相关载荷长途运输的成本,进一步提高生命保障能力.低温等离子体放电过程中会产生大量活性组分,可以在数百度温度下实现二氧化碳的高效解离,是具有很大潜力的二氧化碳解离与转化方式.设计了一种...     

Interconnected Ni（OH）2 and polyether amine on carbon fiber surface for simultaneously improving interfacial adhesion of epoxy composites and electrochemical properties

Interconnected Ni（OH）₂ nanoflakes and polyether amine（PEA） were deposited on carbon fiber tows via a facial and effective process of chemical bath deposition and dip coating. Based on this, a win–win benefit of simultaneously improvements in interfacial shear strength（IFSS） of carbon fiber/epoxy composites and the electrochemical activity has been achieved. Compared with CF and CF-Ni（OH）₂ composites, the IFSS of CF-Ni（OH）₂-PEA/epoxy composite respectively increas...     

直升机加装数据中继设备的设计与分析

直升机因具有低速、机动灵活、起降要求低等特点而得到广泛使用,而空中数据中继转发设备的加改装将进一步拓展直升机任务面。基于某型直升机加装空中数据中继转发站的实际工作,对加改装设计过程进行分析,计算了各部件安装后的受力强度,给出了加装设备结构强度和质心的计算方法,并对加装设备与直升机的电磁兼容性能和设备本身的通信性能进行了分析。结果表明,空中数据中继转发站加装后符合法规要求的结构强度和电磁兼容性等适航要求,且通信性能满足超视距数据中继任务要求。因此,该项工作可为同类型改装工作提供参考和借鉴。     

基于响应曲面的时效成形材料参数修正

为了提高时效成形中回弹现象的有限元仿真精度,使用均匀试验设计结合响应曲面设计的方法,建立了仿真误差对于材料参数的响应函数,求解出材料参数的修正解。以此法得到的仿真结果与试验结果相吻合。     

氨合成-水热改性法制备氢氧化镁阻燃剂

为了解决氢氧化镁和聚合物之间的不相容问题, 对氨合成法-水热改性处理2步法制备高分散氢氧化镁阻燃剂进行了研究,分析了常温合成温度、水热改性温度和水热改性时间对制备大晶型、低比表面积氢氧化镁阻燃剂的影响.结果表明,经过水热改性处理改变了氢氧化镁晶体的生长习性,生成了形貌规则、粒径分布均匀、分散性良好的氢氧化镁六方片状颗粒.另外通过提高氯化镁浓度和氨水过量1倍,探讨了常温合成反应的转化率,认为应该在反应原料等当量下寻求提高转化率的可行方法.