A hybrid chemical modification strategy for monocrystalline silicon micro-grinding: Experimental investigation and synergistic mechanism

For high performance manufacturing of micro parts and features, a hybrid chemical modification strategy is proposed to decrease critical energy barrier of mechanical removal of hard and brittle crystal material by refining localized machining condition. The strategy, namely UV-light and IR-laser hybrid chemical modification (UVIR-CM) strategy, includes two steps, an ultraviolet light (UV-light) catalytic advanced oxidation and an infrared laser (IR-laser) assisted selective modification based on Fenton liquid–solid reaction for monocrystalline silicon. The modification effects of UVIR-CM strategy were investigated by surface morphology micro-observation, cross-section transmission electron microscopy (TEM) observation, Raman spectroscopy analysis and nanoindentation test. Experimental results demonstrated that varied degrees of laser texturing appeared on different strategy samples’ IR-laser scanned area. And the IR-laser thermal damage has been successfully inhibited due to the refraction and reflection of energy by bubbles in liquid medium. But for the UVIR-CM strategy, a uniform and amorphous silicate layer is detected in a certain boundary. The UV-light promotes oxidation cycle ability of the chemical solution and ensures sufficient oxide modified layer for subsequent step. Attributing to synergism of photochemical, photothermal and kinetic effects induced by IR-laser, the modified layer displays layered structure with about 600 nm thickness, (2.7 ± 0.60) GPa nanohardness, and (93.7 ± 22.9) GPa indentation modulus. And the layered structure is amorphous layer, nanocrystal and micro-twins layer from the surface to the interior of sample. Consequently, it reveals that the subsequent mechanical removal will become easy due to decreasing energy barrier of monocrystalline silicon in selective area. Meanwhile, its original excellent mechanical properties also are maintained under a certain depth. The results contribute to develop a novel combined micro-machining technology to achieve collaborative manufacturing of structure shape and surface integrity for micro parts and feature.     

超高温抗氧化碳陶复合材料研究进展

综述了国内外近年来陶瓷涂层抗氧化改性C/ C 复合材料和陶瓷基体抗氧化C/ C 复合材料研究

与应用的新进展, 主要包括1 800℃以下、1 800 ~2 200℃和2 200℃以上不同使用温度范围的抗氧化陶瓷涂层

以及SiC 陶瓷和超高温陶瓷基体改性复合材料。指出了目前高超声速飞行器2 200℃以上超高温抗氧化热防

护材料研究中存在的问题,提出了今后研究的方向。

     

一种可靠性增长试验抽样数Max-Min准则的反馈修正方法

对成败型航空发动机部件可靠性增长试验抽样数的确定问题进行了研究。推导出了初始故障数服从典型离散分布时的最小化最大准则(Max-Min准则),提出了一种逐次抽样样本估计值反馈修正方法。最后给出了一个应用实例,验证了该方法的有效性。     

空间级硅橡胶胶黏剂粘结界面改性分析

针对空间级硅橡胶与聚酰亚胺的粘结界面呈现低表面能、粘结可靠性差的现状，利用有机硅烷的润湿和键结作用对界面进行预处理，改善其粘结强度。通过FTIR、¹H-NMR和GC-MS分析，有机硅烷的主要成分中对粘结性能影响较大的是正硅酸丁酯和丙基三甲基硅氧烷，采用两种偶联剂对聚合物表面进行预处理，在聚合物间不同均相结构层通过硅烷相互扩散和互穿网络形成的分子桥可实现致密交联。力学试验表明，经有机硅烷对待粘结界面表面预处理，粘结构件的剪切强度值可达0.65 MPa；选择适当的有机硅烷作为附着力促进剂，利用其有机官能团、成膜性和交联性可提高粘结构件的可靠性。     

芳纶纤维表面改性及在EPDM 中的分散性

分别采用超声波法和物理机械法对芳纶纤维进行表面改性,研究了两种处理方法对其表面形貌、

分散性以及EPDM 复合材料性能的影响。结果表明:超声法和机械法使芳纶纤维表面形成差别较大的形貌特

征;其中芳纶经机械处理后呈现良好的分散性,其复合材料的拉伸强度和烧蚀深度分别为11. 3 MPa 和1. 2 mm

(10 phr),优于超声波法处理的结果。