增强碳/碳球锥切削中的最小热应力优化研究

对将增强碳/碳纤维块体切削成球锥外形的工艺,块体热膨胀系数异性轴指向可以极大地影响球锥热应力大小,存在优化设计的潜力。本文对增强碳/碳不同主轴方向弹性模量比值下的球锥最小热应力优化特性进行了研究,发现以1为界,不同模量对比关系下的优化特征是完全不同的。在本文加热条件下,当异性轴模量小于同性面模量时,优化曲线对温度场变化很敏感,以块体异性轴和球锥横截面成±42.9夹角时热应力最小;当异性轴模量大于同性面模量时,优化曲线随加热时间变化不大,以块体同性面与球锥对称轴平行或成小锐角时热应力最小。一般而言,工艺设计中应避免用模量大的主轴方向指向球锥对称轴方向。     

Stability and shape analysis of relative equilibrium for three-spacecraft electromagnetic formation

The invariant shapes for close formation flying with inter-craft electromagnetic force ensure several potential space applications. However, the 6-DOF relative equilibrium problem has not been systematically investigated. This paper mainly analyzes the invariant shapes of relative equilibrium for the three-spacecraft electromagnetic formation, and studies the families of invariant shape solutions with real and constant magnetic moments as well as their linear stability. The problem is examined based on the full nonlinear coupled dynamic models for collinear and general triangular configurations. The relative equilibrium conditions are analyzed to determine whether an invariant shape do exist, and the corresponding families of invariant shape solutions are identified for static and spinning configurations respectively. Finally, the linear stability of such invariant shapes is numerically discussed, which have shown that most invariant shapes are unstable and controllable.     

Working processes in the solid-propellant low-temperature aerosol generator with an inert heatexchanger

Alignment charts that make it possible to select a standard size of inert heatexchanger structures with specified output characteristics and a developed scheme of the low-temperature aerosol generator are presented.     

卫星变轨对航天扫描式TDICCD相机系统参数的影响

文章主要介绍和分析卫星变轨对TDICCD相机系统的MTF、扫描周期的影响，最后分析卫星变轨对卫星覆盖范围的影响。     

A/D和D/A转换特性参数测试方法

简要介绍了A/D、D/A转换器的主要测试参数,着重讨论转换特性参数的测试方法及其在混合集成电路测试系统上的实现;同时还介绍了A/D、D/A转换器的一些其他测试方法。     

INVESTIGATION OF TIGHTLY COUPLED SINS/GPS INTEGRATION MIDCOURSE GUIDANCE FOR AIR-TO-AIR MISSILES

ＩＮＶＥＳＴＩＧＡＴＩＯＮＯＦＴＩＧＨＴＬＹＣＯＵＰＬＥＤＳＩＮＳ／ＧＰＳＩＮＴＥＧＲＡＴＩＯＮＭＩＤＣＯＵＲＳＥＧＵＩＤＡＮＣＥＦＯＲＡＩＲ┐ＴＯ┐ＡＩＲＭＩＳＳＩＬＥＳＦｕＬｉ（富立），ＦａｎＹａｏｚｕ（范耀祖），ＮｉｎｇＷｅｎｒｕ（宁文如）（Ｆ...     

M/G/1排队系统性能梯度估计的非标准分析法

如何估计系统性能梯度是离散事件动态系统研究中的一个重要问题.系统性能对于概率参数的梯度无法用传统的摄动分析法来估计,我们从非标准分析的角度提出了一种基于Dirac δ函数的摄动分析算法,分析了相应估计量的强相合性和渐近无偏性.新算法在实现过程中需要用样条函数来近似δ函数,但可以同时估计M/G/1排队系统中顾客期望系统时间和忙期期望长度对概率参数的梯度.数值实验结果表明估计量的相对误差和无偏性检验值都比较小,新算法能够很好地估计M/G/1排队系统的性能梯度.     

Comparative study of productivity of the Rosetta target Comet 67P/Churyumov-Gerasimenko

In an attempt to evaluate correlations between several properties of comets we report the results of a cometary research involving a criterious analysis of gas and dust mass production rates in Comets 67P/Churyumov-Gerasimenko (main target of Rosetta Mission), 1P/Halley, Hyakutake (C/1996 B2), and 46P/Wirtanen and make a comparison between them.     

基于I/O设备驱动机制的CAN设备驱动程序设计

设备驱动设计是嵌入式系统开发的难点.在分析VxWorks实时操作系统字符型I/O设备驱动机制的基础上,给出了VxWorks下CAN设备驱动设计的一般步骤和设计思路,为VxWorks其他设备驱动开发提供了参考.     

过失速下俯敏捷性及纵向控制效能需求研究

结合飞行安全和作战效能需求,对过失速战斗机的大迎角/过失速迎角下俯敏捷性指标及纵向控制效能需求进行了研究.为了满足飞行品质和过失速敏捷性指标要求,采用非线性动态逆方法设计了某推力矢量飞机快回路和慢回路飞行控制律.在此基础上,根据过失速下俯敏捷性和滚转敏捷性指标要求,对所需的最小俯仰推力矢量偏角进行了计算分析,所得结果对先进战斗机的设计有一定的参考价值.