The Cool Interstellar Medium

Infrared spectroscopy and photometry with ISO covering most of the emission range of the interstellar medium has led to important progress in the understanding of the physics and chemistry of the gas, the nature and evolution of the dust grains and also the coupling between the gas and the grains. We review here the ISO results on the cool and low-excitation regions of the interstellar medium, where T _gas≲ 500 K, n _H∼ 100–10⁵ cm⁻³ and the electron density is a few 10⁻⁴. JEL codes: D24, L60, 047 Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

一种空分装置中碳氢化合物的检测方法

介绍用GM600型FID气相色谱仪检测空分装置中碳氢化合物,特别是乙炔含量的方法.     

飞机制造互换协调综合技术工作法

通过分析论证指出，由５种基本的互换协调方法的相互渗透、交叉融合演变成动态的综合技术工作法，是飞机制造互换协调技术发展的必然趋势，并展望了该工作法的发展前景。     

查片仪中线阵CCD的数据采集和处理研究

以CCD作为图像传感器,以AVR单片机作为采集系统的控制核心,以ARM作为基本图像处理单元,实现了图像的快速采集、存储及数据处理。对系统的硬件设计和软件设计进行讨论,对应用的算法进行介绍。     

某型无人机导轨起飞装置气液压能源系统的应用

介绍了以气囊式蓄能器和液压缸为主构成的某型无人机导轨发射装置的气液压能源系统，并对气囊式蓄能器和液压缸的动态参数特性及其匹配关系进行了理论分析计算和动态特性试验。计算和试验结果表明，该气液压能源系统所确定的气液压能转换成机械能后能够满足无人机起飞所需的动力，并在某型无人机导轨发射装置中得到了工程应用。     

低湍流度风洞中的斜置翼三维边界层测量试验研究

在西工大低湍流度风洞中，于不同后掠角和湍流度下，以４５°单丝热线探头，在斜置翼上测量三维边界层速度型并计算特征参数的情况表明：横流影响的规律性明显，三维速度型扭曲相当复杂；后掠角和湍流度增大时，速度型和厚度的发展、不同层次的流线偏移和特征参数的变化受横流影响更为明显。     

纤维增强塑料/钢筋混凝土复合构件的强度分析

基于平截面假设和ERP／RC复合截面各组份材料的强度理论，推导并给出FRP包覆RC截面的抗压，抗拉，抗弯，抗剪强度计算公式，为实验研究与工程实用提供了理论依据。     

Cutting force model and damage formation mechanism in milling of 70wt% Si/Al composite

High-mass fraction silicon aluminium composite(Si/Al composite) has unique properties of high specific strength, low thermal expansion coefficient, excellent wear resistance and weldability. It has attracted many applications in terms of radar communication, aerospace and automobile industry. However, rapid tool wear resulted from high cutting force and hard abrasion, and damaged machined surfaces are the main problem in machining Si/Al composite. This work aims to reveal the mechanisms of milli...     

Interconnected Ni（OH）2 and polyether amine on carbon fiber surface for simultaneously improving interfacial adhesion of epoxy composites and electrochemical properties

Interconnected Ni（OH）₂ nanoflakes and polyether amine（PEA） were deposited on carbon fiber tows via a facial and effective process of chemical bath deposition and dip coating. Based on this, a win–win benefit of simultaneously improvements in interfacial shear strength（IFSS） of carbon fiber/epoxy composites and the electrochemical activity has been achieved. Compared with CF and CF-Ni（OH）₂ composites, the IFSS of CF-Ni（OH）₂-PEA/epoxy composite respectively increas...     

基于化学反应器网络模型法的预混气组分对NOx反应路径影响研究

摘 要：为探究预混气组分对不同反应路径下NOx生成影响,针对高压射流反应器,基于CFD流场特征等,构建优化了单PSR、2PSR、3PSR以及PSR+PFR四种化学反应器网络模型。在贫预混燃烧条件下,研究了纯CH4及其混合气燃烧时不同反应路径下NOx的生成情况,得出了燃烧室内不同反应区域每条反应路径NOx的生成量。结果表明,纯CH4燃烧产生的NOx主要来自于热力型、快速型和N2O-中间体型三条反应路径。绝热火焰温度的提高主要促进了热力型和N2O-中间体型NOx的生成。随着CH4或CO中加入H2摩尔分数的增加,NOx排放总量降低,快速型NOx生成速率降低,特别是火焰刷区域的。另外,混合气中CO摩尔分数的增加会导致NOx生成量增多。