地面对带后缘分离的翼型绕流影响的计算

本文提出了用在地面上分布奇点来模拟地面的方法。计算结果与精确解和镜像法结果很吻合。     

地面涡研究

 The formation mechanism and the flow characteristics of the ground vortices as well as the method of eliminating ground vortices are studied in this paper. It is noted that, when air is sucked into an aircraft engine, on the ground a momentum moment is exerted on a point sink flow by a lateral wind or a reversed jet from the tail pipe, resulting in the formation of eddy stream known as ground vortices. Through an analysis of numerous experimental data it is found that the ground vortices are composed of two vortices instead of a single and concentrated free vortex.The tangitial velocity distribution curves of the ground vortex can be expressed as two independent functions: one is a directly proportional function located at the core, and the other is an inversely proportional function around the outer surrounding. The pressure distribution is also composed of two parabolic functions.In addition, a method of eliminating the ground vortices is presented, and it is of important engineering significance to eliminate the ground vortices.     

热暴露对B/Al复合材料性能的影响

对经300℃、500℃高温热暴露的B／Al（LF6）复合材料的力学性能进行了研究，实验结果表明材料在300℃下热暴露时，性能下降速度较慢，100h后强度保留率约为76％，延伸率保留率为74％。而在500℃下热暴露时，5h以上强度就有明显降低。高温长时间热暴露后复合材料的断裂也从积累型转变为典型的非累积型断裂。通过透射电镜（TEM）及扫描电镜（SEM）对固态热压制造态和主温热暴露的界面状况进行了分析，认为界面反应是造成B／Al复合材料力学性能下降的主要原因。     

嵌入式网关技术在门禁控制系统中的应用

随着计算机网络技术的发展和普及，目前出现了以单片机技术和以太网技术为核心的嵌入式网关技术，采用嵌入网关技术，可在局域网环境下采用TCP/IP协议实现门禁控制控制器同后台服务器的数据交换。其优点是技术先进、数据传输速度高、工程成本低、可靠性和安全性高。在论述了嵌入式网关工作原理的基础上，重点讨论了嵌入式网关中的门禁控制器的应用问题。     

Phase Space Density Analysis of Energy Transport in the Earth’s Magnetotail

Two energetic events in the Earth’s magnetotail detected by Geotail are examined with detailed analysis of three-dimensional velocity phase space density. It is found that the occurrence of multiple ion components is high during these dynamic episodes. Different populations evolve independently of each other, suggesting particles from multiple activity sites contributing to the observed phase space density. The transport properties with consideration of multiple components are evaluated, with the result showing significant differences from those based on a single fluid approach. This comparison indicates that precise evaluation of the energy and magnetic flux transport of energetic events in the magnetotail requires resolving individual populations in the phase space density.     

跨音压气机确定应力场分析

采用全三维黏性定常、非定常数值模拟技术,对NASA 67第1级的固有非定常流动进行了研究.首先分析了定常流场和非定常时均流场间的差别以及压气机中典型的转、静干涉现象,然后对通道内确定应力的分布规律和转、静交界面确定应力各项的分布特点进行了较为深入的研究,揭示了现有确定应力模型的一些局限性,可为确定应力建模提供一定的指导作用.     

联合制导攻击武器六自由度系统仿真

重点分析了GPS/IN S复合制导系统及激光导引头的工作原理和建模方法,同时介绍了增程套件的原理,并设计了方案弹道。通过六自由度弹道仿真,比较了增加组件前后联合制导攻击武器的性能指标。研究结论对我国现有库存常规炸弹的制导化改进有一定的参考价值。     

叶轮机械三维粘性动静叶干涉的数值模拟

本文发展了 1套模拟叶轮机械三维粘性动静叶干涉的数值方法。在成熟的空间离散方法基础上 ,提出了 1种高效的双时间步隐式时间推进方法 ,并构造了一种保证守恒的动静叶交界面处的数值通量计算方法。本文对某三维亚音速涡轮的动静叶干涉进行了数值模拟 ,结果与实验符合较好。     

关于厚薄板弯曲分析的内位移杂交元法

 本文通过引入单元内位移和优化处理的单元应力场,以计入剪切变形的板弯曲能量泛函为基础,导出适用于厚、薄板分析的四边形杂交应力元。内力场和内位移的合理选择避免了单元零能模式的出现、避免了解的剪切自锁现象。该优化单元显示了较好的通用性和收敛性。对关于剪切自锁的RCI判据提出了反例、说明了它的局限性。     

混杂纤维复合材料吸湿行为研究

 本文采用80℃水浸的方法,研究了不同类型混杂复合材料层压板的吸湿行为,找到描述混杂复合材料吸湿规律方程。同时,从理论上对混杂复合材料的平衡吸湿量及湿扩散系数进行了分析,建立了数学表达式,理论与实验较好吻合。