一种小型化IRIG-PBW体制FM/FM副载波解调系统

介绍一种可小型化的 FM/ FM多路遥测信号副载波解调器 ,该解调器使用一种可编程的通用有源滤波器 MAX2 6 0 / 2 6 1/ 2 6 2芯片 ,使得分路滤波器的中心频率及通带大小只需通过编程即可实现 ,不需要任何阻容器件 ,因此系统不仅具有很好的灵活性 ,而且易于实现小型化。对通道中心频率较低的 IRIG- PBW体制 1到 18通道均可适用。详细介绍实现方法     

跨大气层和空间区域飞行器的液体推进剂管理

根据大气层飞行环境与机动飞行特点,以及空间飞行环境与液体推进剂特点,分析了跨大气层和空间区域飞行器的保证重力场和失重状态下均无夹气液体输送、控制液体推进剂质心位移、剩余推进剂空间排放和重复使用等液体推进剂管理技术要求。阐述了相应的关键技术,如包括无夹气输送、液体质心位移控制、失重状态下的流体动力、参数确定和结构设计等管理模式确定,以及包括模型参数确定、模型、状态模拟和验证等的管理模式试验。     

A Geosynchronous Orbit Search Strategy

Since more than 10 years there is evidence that small-size space debris is accumulating in the geosynchronous orbit (GEO), probably as the result of breakups. Two break-ups have been reported in GEO. The 1978 break-up of an EKRAN 2 satellite, SSN 10365, was identified in 1992, and in 1992 a Titan 3C Transtage, SSN 3432, break-up produced at least twenty observable pieces. Subsequently several nations performed optical surveys of the GEO region in the form of independent observation campaigns. Such surveys suffer from the fact that the field of view of optical telescopes is small compared with the total area covered by the GEO ring. As a consequence only a small volume of the orbital element-magnitude-space is covered by each individual survey. Results from these surveys are thus affected by observational biases and therefore difficult to compare. This paper describes the development of a common search strategy to overcome these limitations. The strategy optimizes the sampling for objects in orbits similar to the orbits of the known GEO population but does not exclude the detection of objects with other orbital planes. A properly designed common search strategy clearly eases the comparison of results from different groups and the extrapolation from the sparse (biased) samples to the entire GEO environment.     

2D碳/碳复合材料CVI过程的数值模拟研究

本文根据３Ｄ碳／碳复合材料的结构特征及ＣＶＩ工艺的特点建立了孔隙模型和动力学模型，并利用该模型对其ＣＶＩ过程进行了模拟与分析。模拟结果与实验结果的对比表明该数学模型是合理的。     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

INS／GPS组合导航系统的容错研究

本文研究了INS/GPS组合导航系统的容错问题,并提出了一个两级故障检测及分离方案。通过采用该方案,INS/GPS组合导航系统将具有较高的容错能力,并能为用户提供连续、精确的导航信息。     

全面覆盖ISO／IEC 17025要素的校准实验室管理信息系统的开发

开发符合ISO/IEC 17025标准要求的校准实验室信息管理系统,对提高校准实验室的工作质量有着重要的意义。论述了覆盖校准全要素要求的标准实验室信息管理系统的框架模型,以及基于此模型的系统开发实例的基础上,提出了增强性角色控制模型,应用了修改痕迹保留等技术。     

板料成形的数值分析及程序系统

本文讨论了板料成形的数值分析方法,并介绍一个能在微机上运行的程序系统——CASF(Computer Aided Sheetmetal Forming)01系统。 CASF01系统采用参数三次样条描述板金零件的几何外形,按弹-塑性流动理论用完全拉格朗日有限元法计算成形过程中的应力应变分布。由于参数样条的插值性和分段描述特点与有限元法的结构离散在基本思想和处理方法上的相似性,系统内曲面描述和力学分析程序间数据传递迅速方便。圆板胀形及其汽车零件的计算实例表明了CASF01系统的可靠性和实用性。     

计算机辅助任意多边形排料

 本文描述了一种计算机辅助排料的算法。它能自动处理二维不规则形状物体的排料。排料的处理过程分为两个阶段。现介绍的为第一阶段的算法。计算实例表明,该方法可以明显减少计算量。并具有原材料利用率高的特点。 飞机蒙皮等钣金件的下料就涉及到大量的排料问题,在整张的金属板材上排成所需要的零件形状。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.