光纤光栅温度传感器研究进展

归纳了以光纤光栅为基础的温度传感器的研究现状,总结了这些温度传感器的基本原理,再现了它们的主要结构,展示了原文提到的实验过程和数据分析结果,并对这些传感器的优点和不足进行了分析,提出了部分改进方案。通过研究发现：光纤光栅温度传感器具有优良的特性,能够在恶劣环境下测量极高的温度,具有广阔的应用前景。     

Surface shape control of integrated paraboloid space reflector consisting of sub-reflectors exploiting modulated solar pressure

Reflectors are very critical space elements and can be used not only as solar collectors/reflectors, telecommunication radio antennas and telescopes but also for dual-usage such as solar sails and solar concentrators to probe and sublimate materials from asteroids when actively controlling the surface shape. In this paper, the surface shape of a slack reflector with negligible elastic deformations will be controlled to be a paraboloid by actively modulating the solar radiation pressure (SRP) force using reflectivity control devices (RCDs) across the reflector. Nonlinear static equilibrium equations for an arbitrary infinitesimal within the reflector along the radial, circumferential and transverse directions are established considering the external modulated SRP force and internal tensions respectively. The coupled radial stress differential governing equation and reflectivity algebraic equation are obtained for the paraboloid reflector by the help of the formulation of an inverse problem based on equilibrium equations previously established. Some analytical and numerical analysis for reflectors with ideal and non-perfect SRP force models are performed respectively. The conclusions concerning about how to control the reflector’s surface shape successfully using allowed reflectivity, resulting in reasonable stress range, moreover, how to get the feasible solutions influenced by the reflector’s size parameters, are all based on the presented analytical and numerical analysis.     

一起罕见的波音737NG飞机备用液压泵低压灯亮故障分析

通过对一起波音737NG飞机备用液压泵低压灯亮故障的分析，从宏观和整体的角度理解液压系统各部件之间的关联关系，为类似故障的排除提供参考。     

A novel environmental control system based on membrane dehumidification

This paper conducts a simulation study of a novel aircraft environmental control system based on membrane dehumidification(MD-ECS),and compares the system with the up-to-date four-wheel high pressure de-water system(4WHPDW-ECS).Mathematical models for the two systems are established,and a system simulation using a numerical technique is performed to analyze and compare the cooling performance of the two systems.Simulation results show that the cooling capacity of MD-ECS is much higher than that of 4WHPDW-ECS under the same working conditions,indicating that the novel system is theoretically feasible and promising.The effects of the sweep ratio of the membrane dehumidifier on the dehumidification and cooling performance of the system is also investigated.     

基于变速积分的高速电机磁悬浮控制系统设计

针对磁悬浮高速电机的磁轴承-转子系统,设计了基于MCU+FPGA的数字控制系统。为实现转子系统的高转速下稳定控制,在建立了磁轴承-转子闭环控制系统模型的基础上,针对常规PID控制系统的超调振荡问题和PD控制系统的转子位移静差问题,利用变速积分的思想设计了改进的PID控制器。实验表明,在消除了系统静差的同时明显减小了系统的超调量和调节时间,说明设计的控制系统具有很好的动态特性和稳态精度。     

一种负极性直流高压线性电源设计

本文提出了一种基于光耦反馈调整的负极性高压线性电源解决方案，使用NPN型三极管作为功率调整管的前提下，实现了负1200V直流电压输出。本文对提出的电源方案建立了小信号传递函数模型，在传递函数模型的基础上论证了所提出的电源系统具有稳定性高、噪声低等优点。     

多点静压落差法在风洞稳速压控制系统中的分析与应用

先介绍了两种测量风洞稳速压控制系统风速反馈值的常用方式-单点风速测量法和多点静压落差法,并对其特点和应用场合进行了分析;然后对多点静压落差法进行数学建模,给出了静压落差与风洞试验段中心点风速的关系;最后用一个工程实例说明此方法在实际风洞设计中的应用。     

不锈钢、钛合金导管高频钎焊工艺方法的改进

高频钎焊焊接方法在国内外进行研究的院校和公司相对较少，是一项较新的钎焊方法。国外在此项焊接工艺的研究和应用走在世界的前列。国内一直处于不断摸索和改进的过程中，焊接过程始终存在一些问题。通过本课题技术研究和相关的试验，详细地介绍了高频钎焊设备、工艺方法和高频钎焊工艺参数确定等方面的应用。     

高压液氧供应系统管路设计

高压液氧供应系统是我国压力最高的挤压式液体火箭发动机试验台的关键分系统。在系统设计过程中，通过合理布置管路，设计专用固定支架，采用自然补偿和堆积绝热技术，解决了高压低温推进剂系统管路设计中的难题。该系统顺利通过气密性检查和调试，经多次热试车考核，系统稳定可靠，满足设计要求。     

Constant power H∞ stabilization control strategy on airborne pump supplying system

以机载泵源系统的恒功率控制为目标，针对作业任务中系统负载随时间变化的情况，采用使液压系统输出功率保持恒定的控制方式来达到充分利用发动机功率的目的，对于机载泵源控制系统的主要被控对象——轴向柱塞式变量泵，建立了其状态方程和流量输出方程，采用H。鲁棒镇定控制策略实时调节泵的排量，仿真结果表明：当负载变化时，系统能根据压力的变化快速转换到恒功率工作曲线下对应的流量状态，所设计的H。控制器能够减小干扰和模型参数不确定对系统稳定性的影响，具有良好的鲁棒性，表明该方法用于机载液压系统可以改善系统工作性能，提高系统功率的利用率。