火烧炉内气相燃烧过程的三维数值模拟

本文对某工业火烧炉内的三维湍流气相燃烧场特性进行了数值模拟,湍流模型采用可实现k-ε双方程模型,湍流燃烧采用有限速率/涡耗散模型,辐射换热采用P1模型,数值方法采用SIMPLE算法,实现了炉内火烧试验的数值再现,特别考察了入口压力、燃料/空气比、多烧嘴不同组合工况等因素对炉内温度场和流场的影响,并对该火烧炉的运行提出了一些合理化建议,为其实际运行提供了有益的参考。     

固体火箭发动机药柱主动段飞行时应力应变分析

为了探讨固体火箭发动机药柱主动段飞行时的形变、应力和应变变化规律,以星形药型发动机为例,采用三维粘弹性有限元法,根据推进剂药柱的燃烧规律,通过计算发动机药柱在整个工作过程中不同烧蚀情况下各构成部分的结构响应,得到了主动段飞行时发动机药柱在不同环境温度、燃气内压与轴向过载联合作用下位移、应力和应变场随时间的变化规律。结果表明,低温点火发射时,内压增压至峰值时为发动机最危险时刻。     

气相爆轰波马赫反射非自相似性特征的实验

为了研究在CJ(Chapman-Jouguet)状态下气相爆轰波马赫反射的非自相似性特征,搭建了由驱动段、传播段以及观测段组成的矩形管道;利用纹影和烟膜实验方法分别对3种预混气发生马赫反射现象进行了实验研究.实验结果表明:对稳态或非稳态气体,测量了马赫反射三波点位置高度,验证了马赫反射三波点轨迹线为波动的曲线,即自相似性对爆轰波马赫反射失效;非自相似性的重要特征是三波点轨迹线在楔角初始位置时基本遵循无反应冲击波理论计算结果,随后逐渐偏离并向有反应冲击波转变,之后接近平行于反应冲击波理论计算并稳定地处于两个理论值之间.最后给出在初始压力为10kPa和楔角为30°的条件下,对于所研究的3种气体,其马赫反射三波点发生转变的位置高度分别约为0.8,1.05cm以及0.5cm,可见相同初始条件下非稳态气体的马赫反射发生转变比稳态气体提前.      

软件产品质量管理的改进对策

本文分析了软件产品质量的特性及控制要素，针对当前软件产品存在的质量问题，结合市场对软件产品的质量需求，探讨了提高软件产品质量的途径及应采取的对策。     

固体火箭发动机前封头人工脱粘层烧蚀研究

从理论分析的角度出发．通过对人工脱粘层和绝热层所构成的槽缝燃气温度场与烧蚀的耦合计算，得出了人工脱粘层的烧蚀规律。在计算中，采用了隐式差分格式及控制容积法等计算技术，并采用了先进的烧蚀模型。为模拟发动机静止与飞行两种不同状态，本文对不同宽度的槽缝人工脱粘层的烧蚀进行了计算，对其进行了比较。本文所采用的方法可供今后人工脱粘层的设计参考。     

固体火箭发动机内绝热层烧蚀质量损失计算

运用较完备的烧蚀模型，采用了动边界显式差分格式，对固体火箭发动机内绝热层的烧蚀及其温度场进行了耦合计算。计算得到烧蚀率、炭化率、烧蚀厚度和炭化厚度，以及根据绝热层的工作时间计算出内绝热层的质量损失及发动机工作完成后一段时间内后效炭化质量损失。采用该方法不仅能使内绝热层设计更为合理，而且为后效推力的研究打下了基础。     

L׳ADROIT – A spaceborne ultraviolet laser system for space debris clearing

Small (1–10 cm) debris in low Earth orbit (LEO) are extremely dangerous, because they spread the breakup cascade. Pulsed laser active debris removal using laser ablation jets on target is the most cost-effective way to re-enter the small debris. No other solutions address the whole problem of large (~100 cm, 1 t) as well as small debris. Physical removal of small debris (by nets, tethers and so on) is uneconomical because of the energy cost of matching orbits. In this paper, we present a completely new proposal relative to our earlier work. This new approach uses rapid, head-on interaction in 10–40 s rather than 4 minutes, using 20–40 kW bursts of 100 ps, 355 nm UV pulses from a 1.5 m diameter aperture on a space-based station in LEO. The station employs “heat-capacity” laser mode with low duty cycle to create an adaptable, robust, dual-mode system which can lower or raise large derelict objects into less dangerous orbits, as well as clear out the small debris in a 400-km thick LEO band. Time-average laser optical power is less than 15 kW. The combination of short pulses and UV wavelength gives lower required fluence on target as well as higher momentum coupling coefficient. An orbiting system can have short range because of high interaction rate deriving from its velocity through the debris field. This leads to much smaller mirrors and lower average power than the ground-based systems we have considered previously. Our system also permits strong defense of specific assets. Analysis gives an estimated cost less than $1 k each to re-enter most small debris in a few months, and about 280 k$ each to raise or lower 1-ton objects by 40 km. We believe it can do this for 2000 such large objects in about four years. Laser ablation is one of the few interactions in nature that propel a distant object without any significant reaction on the source.     

热解气体燃烧对炭化复合材料烧蚀热响应影响规律

在近空间高超声速飞行器飞行时间长、马赫数不断增加的发展趋势下，热防护与轻量化的矛盾越来越突出。基于此，开展了热解气体燃烧对炭化复合材料表面烧蚀影响的相关数值模拟研究，并与风洞试验结果进行了对比。结果表明：热解气体的燃烧可降低炭化复合材料表面的烧蚀厚度，并且随着气动热的增加，热解气体燃烧对材料表面碳的保护作用越来越明显。研究成果可为下一代近空间高超声速飞行器热防护系统的优化设计提供技术支撑。     

Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.     

不同喷铝参数对复合材料雷击防护性能模拟

为了研究复合材料不同的雷击防护(lightning strike protection,LSP)系统在雷电流作用下的损伤规律,对雷击损伤过程和烧蚀机理进行分析,建立复合材料层合板雷击防护的能量平衡数学模型。在此基础上,在ABAQUS中建立复合材料基准件、全喷铝和局部喷铝防护系统的碳纤维增强复合材料(carbon fiber reinforced polymer,CFRP)层合板电-热耦合有限元模型,和实验结果对比验证模型的有效性,对雷击烧蚀损伤特征进行分析,并引入雷击烧蚀损伤指数DI,得出三种不同模型在不同铝涂层厚度、不同峰值雷电流作用下的烧蚀损伤规律,并对两种不同的局部喷铝防护系统下复合材料的损伤特征进行对比分析。结果表明:雷击防护系统下复合材料的烧蚀损伤面积和铝涂层厚度关系进行函数拟合,两者均满足幂函数关系。