RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

基于CompactPCI总线的红外目标跟踪系统

红外目标跟踪方法的理论研究较多,而通用的实时跟踪系统较少。给出了具有CompactPCI总线、并行分布式结构的系统方案,核心是基于标准总线的实时系统,上位机实现卡尔曼预测,DSP并行完成频域转换与相关,CPLD实现总线接口控制。所实现的系统具有运算能力强、通信带宽大、可扩展性和通用性强的特点,实用表明了它的可行性。     

基于STFRFT的LFM引信抗欺骗干扰方法

针对线性调频脉冲压缩引信易受转发式假目标欺骗干扰问题,提出了基于短时分数阶傅立叶变换(STFRFT)的抗欺骗干扰方法。首先,通过分数阶傅立叶变换将回波信号与欺骗干扰各分量信号进行分离;再利用相同调频率的LFM信号经短时分数阶傅立叶变换后最大幅值与窗函数宽度成线性关系,而不同调频率的最大幅值不随窗函数宽度变化的特点,有效分辨假目标欺骗干扰,正确检测目标回波信号;最后,通过仿真证明了方法的正确性,并验证所提方法具有良好的抗欺骗干扰效果。     

Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.     

雷达信息显示中扫描线抑制问题分析

根据在混合显示方式下原始视频和综合信息显示的特点，分析了在综合信息显示时间不足的情况下，增大其显示时间的方法，如何保证固定的刷新频率，及自适应扫描线抑制方法中相应控制信号的产生过程，还分析了减少扫描线对原始视频信息显示的影响。     

光线示波器振子的选用

为了准确地测量记录各种被测信号,应当正确地选用振子的固有频率和阻尼,适当地选取被测信号的大小,保持信号源内阻Ri与振子的内阻rg相匹配,同时要正确地调整光点位置,以减小圆弧误差.     

高精度自动记录式流量计原理设计与应用

本文就自动记录式流量计的原理、结构、参数设置、元器件选择等，作了较为详尽的论述，其测量精度很高，是包括微机在内的其他测量手段所无法比拟的，而且结构简单，工艺性好，可靠耐用等，最后给出了实用的电子线路图。     

频率域鲁棒性分析方法及其在飞控中的应用

主要研究了频率域鲁棒稳定性分析的新方法及其在收音机横侧控制系统中的应用。为了提高计算效率，基于Ｎｙｑｕｉｓｔ判据，提出了对数和鲁棒稳定性的新判据，为了简化多变量频率域鲁棒性分析和设计方法，进一步提出了递Ｎｙｑｕｉｓｔ阵对占优势判别式，使计算量大大减少，所提出的鲁棒性新判据在飞机横侧向控制中的应用表明，该方法可以得到讼人满意的结果。     

外差式侦察接收机对频率捷变信号进行侦察的可行性

根据频率捷变信号的特点,分析了几种侦察体制下接收频率捷变信号需要的中频带宽、扫描步进频宽和截获时间,给出了对频率捷变信号侦察的可行性方案。     

基于数字补偿的快速频率合成方法的研究

基于I/Q调制的快速频率合成方法比目前采用的频率合成方法更易调试,而且使用灵活。其思路是将信号先通过单边带调制,将较低频率调制到需要的频率范围;然后采用对基带信号的数字预补偿方法来抑制镜像频率和载波泄漏,从而达到应用的目的。文章中还给出一种基于输出信号包络信息的补偿系数调整算法,其仿真结果说明该新补偿算法可以有效抑制镜像频率和载波泄漏。