一次民机飞行中甚高频通信不稳定的排故

针对某型号民用飞机甚高频通信系统在飞行中出现断续故障的情况，对系统的架构进行描述，分析了故障产生的机理，提出了排故思路，记述了排故过程，并总结了甚高频通信系统的设计要点和工艺要点。     

基于实体-属性框架的领域知识库构建

知识库是进行各种自然语言处理任务不可或缺的一项基础性的资源。而目前知识库的构建还是一个难点问题,尤其是以自动方式构建复杂的领域性知识库系统的研究还处于探索阶段。本文提出一种基于实体-属性框架的领域知识库自动构建方法,致力于利用航空百科辞典的信息自动获取术语之间的上下位关系及部分实体属性关系,其中,基于多策略的上下位关系术语对提取融合了后缀子串匹配、模板自动构建、实质提取三种方法,分别考虑了辞典中反映上下位关系的不同信息。其中模板自动构建方法,在无需人工标注语料的情况下获得了比较好的效果。属性提取部分采用了以人工标注语料为前提的模板匹配方法。实验表明,本文系统对术语上下位关系抽取的F值达到76.01%,对各个属性的抽取也达到了75%以上。     

Abnormal changes of dynamic derivatives at low reduced frequencies

A number of studies have found that abnormal changes of dynamic derivatives occurred at very low reduced frequencies, but its inducement mechanism is not very clear. This paper has researched the abnormal changes and analyzed the influence on some parameters by solving the unsteady flow around forced oscillation airfoils based on Navier-Stokes equations. Results indicate that when the reduced frequency approaches to zero, the dynamic derivatives obtained by the numerical method will diverge. We have also proven it in theory that this phenomenon is not physical but completely caused by numerical singularity. Furthermore, the abnormal phenomenon can be effectively mitigated by using the time spectral method to solve the aerodynamic forces and the integral method to obtain the dynamic derivatives. When the reduced frequency is in the range of 0.001–0.01, the dynamic derivative maintains nearly unchanged for the whole speed region. This study can provide a reference for the reasonable choice of the reduced frequency in calculations and experiments of dynamic derivatives.     

可拓模式识别算法中经典域的确定方法

可拓模式识别算法是根据各个关联度的对比来识别最终的模式,其中经典域区间的确定有着重要的作用。传统的经典域确定方法是基于数理统计学的,不适用于小样本数据,数据不完全以及数据分布未知等复杂情况。引入Bootstrap算法,并和传统的方法对比,更精确地确定了经典域区间。     

FPGA设计中的亚稳态问题及其预防方法研究

由于在复杂FPGA（Field Programmable Gate Array,现场可编程门阵列）设计中存在跨时钟域,通常会产生亚稳态现象.为有效地预防和解决该问题,分析FPGA设计中亚稳态的产生机理及其对数字信号处理系统的影响.根据不同的信号同步类型,针对单比特电平信号、脉冲信号和边沿信号,分别给出基于触发器级联的跨时钟域信号同步方法;针对并行信号,提出基于异步FIFO （First In First Out,先进先出队列）和握手协议的跨时钟域同步方法;并通过仿真手段分析信号同步方法的有效性及其适用范围.结果表明：这些方法能够正确有效地完成跨时钟域信号同步,预防可能出现的亚稳态问题,从而提高复杂FPGA设计的可靠性和稳定性.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

采用霍尔传感器的旋翼频率采集设计

为达到对旋翼飞机的控制,需要对旋翼转速进行采集.霍尔转速传感器以其高可靠性等优点常被用来测量转速.介绍了一种使用霍尔传感器进行旋翼转速采集系统,包括硬件构架,逻辑采集单元和软件设计,并给出了优化策略;通过试验数据分析,采集精度达到了预期.     

BL分析下的管制员差错本体建模研究

为分析识别空中交通管制任务中管制差错问题,结合BL(body loop,BL)压力产生模型研究管制员压力来源.提出领域本体的建模流程,确立推理模型的内部逻辑关系,构建管制差错领域本体模型.采用FaCT++推理机针对实际案例进行语义推理,从而识别管制差错类型,提出了基于本体的管制差错专家系统的系统框架.结果验证了构建推理模型的有效性和合理性.     

存在外部干扰的网络控制系统故障检测和优化

针对存在时延和丢包的网络控制系统,研究了系统的故障检测滤波器设计和优化设计问题.通过泰勒展开将未知时延处理成外界干扰,采用伯努利随机过程来描述丢包现象.设计观测器产生残差信号,将故障检测问题转化为H∞滤波问题.通过Lyapunov函数方法分析了系统的稳定性.以线性矩阵不等式的形式给出了滤波器存在的充分条件和求解方法.为进一步提高系统对故障信号的灵敏度,采用了一种优化设计方法对故障检测系统进行了优化.最后通过仿真验证了算法的有效性.     

RFID技术在航空领域的应用研究

射频识别(RFID)技术现已广泛用于物流、金融、零售等各个行业.航空领域的RFID应用起步较晚,通过对RFID技术在飞机制造商、原始设备生产厂家(OEM)、航空公司的一些典型的应用案例的分析,提出RFID技术应用于航空领域所面临的挑战及必要性,为其未来航空业自动识别技术的发展指明了方向.