Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

基于图剖分的多块结构网格负载平衡方法

负载平衡是影响并行计算性能的重要因素。针对多块结构网格,给出了一种改进的多层次图剖分负载平衡方法。该方法设计了新的网格剖分算法,采用改进的子块分裂方法与图剖分算法的循环调用实现结构对接网格剖分,并通过建立不同物体重叠网格间的连接关系,实现了结构重叠网格的负载平衡。采用2个典型算例对方法进行了对比验证,数值结果表明,子块分裂方法对剖分结果具有重要影响,采用循环调用算法及改进的子块分裂方法能有效地实现计算负载均衡及通信量优化,同时显著减少了网格块数及因虚网格导致的内存需求,有利于提高并行效率。该负载平衡方法与网格拓扑无关,适用于多块结构对接网格及重叠网格,且整体型剖分方式对于多块结构重叠网格具有更好的剖分效果。     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.     

气膜孔内局部堵塞对气膜冷却特性的影响

在吹风比为0.3~1.5,堵塞比为0.1~0.5范围内,对平板上单排倾斜气膜孔内局部堵塞所引起的冷气射流流动和冷却特性变化进行了数值研究,分析了堵塞比、堵塞位置和吹风比对绝热气膜冷却效率的影响.在研究参数范围内的研究结果表明:气膜孔出口端前缘的局部堵塞有利于抑制肾形涡,对气膜孔下游的绝热气膜冷却效率有改善作用,并且随着堵塞比和吹风比的增加,对冷却效果的改善越为明显.而在气膜孔出口端尾缘或侧边的堵塞则在较大的堵塞比下削弱气膜冷却效果.相对于气膜孔出气端的局部堵塞,在气膜孔进气端和中部的堵塞对绝热气膜冷却效率的影响要微弱得多.     

结合损伤力学与有限元方法预估铆接结构疲劳寿命

利用飞机铆接试验件疲劳试验数据,结合损伤力学与有限元方法,通过MATLAB调用ABAQUS进行损伤演化方程参数的遗传优化反演。将反演得到的损伤演化方程用于飞机结构疲劳寿命预估中,对机翼蒙皮锪窝形式的铆接结构进行了寿命计算和分析,并与试验数据作对比,证明了方法的可行性。     

环型与线型聚能装药射流成型机理对比

环型聚能装药药型罩2侧在挤压汇聚形成射流过程中存在不对称性,不能完全套用线型聚能装药射流成型的现有理论。利用DYNA3D软件对相同剖面结构的环型、线型聚能装药射流成型过程进行数值模拟,通过比较分析得出了环型聚能装药形成杵体及射流参数的分布特性,为进一步理论研究及工程应用提供参考。     

基于损伤力学预估点蚀疲劳寿命有限元法

飞机使用环境谱的不断变化会对机体结构造成腐蚀损伤,工程上难以在外场环境下进行实时损伤检测与疲劳性能试验。点蚀作为腐蚀的初始阶段,危害性大,部位也难以预测。采用损伤力学和有限元相结合的方法,以材料疲劳S-N数据为基础,将点蚀损伤认为是一种初始缺陷,建立基于损伤力学假设的点蚀损伤疲劳寿命预估方法,并提出一种改进型损伤参数反演方法。对点蚀疲劳失效过程进行数值模拟,模拟结果与试验结果吻合,证明该方法应用于金属材料点蚀疲劳问题中是合理的、可行的,为后续实际预腐蚀损伤疲劳研究奠定了基础。     

Determination of an instantaneous Laplace plane for Mercury’s rotation

Mercury is the target of two space missions: MESSENGER, which carried out its first and second flybys of Mercury on January 14, 2008 and October 6, 2008, and the ESA/JAXA space mission BepiColombo, scheduled to arrive at Mercury in 2020. The preparation of these missions requires a good knowledge of the rotation of Mercury.     

NUMERICAL SIMULATION ON MULTI-FLUID INTERFACES

INTRODUCTIONThe study on phenomenon of multi- fluid in-terface driven by shock waves include:( 1 ) totrack the motion of multimaterial interfaces;( 2 )to simulate the chemical reaction on the inter-faces. As the pioneering work,chemical reactionis neglected in this paper. The objective is totrack the interfaces. Of course,the fluids aretreated as compressible medium under such ahigh impact.Although Eulerian schemes workwell for most gas flows,they have been shownto be too dissipative nea…     

信息时代的飞行力学

基于现代信息技术，扼要论述了作为信息时代的飞行力学－－计算飞行力学的产生背景、问题表述、理论框架和计算系统，以及计算飞行力学在未来飞行器发展和运用研究中的作用。