Active vibration suppression for flexible satellites using a novel component synthesis method

This paper is devoted to developing a closed-loop vibration suppression controller for a satellite with large flexible appendages based on component synthesis vibration suppression (CSVS) method. The dynamics model of a flexible satellite is firstly established by using the Newton–Euler methodology, and the dynamics model of the flywheel is also developed. A novel CSVS method is presented based on zero-vibration differentiator (ZVD), which can guarantee multi-order vibration suppression. Combined with the proposed CSVS method, traditional closed-loop controllers such as PD or sliding mode controllers can be applied to active vibration suppression. The stability of the proposed closed-loop CSVS controller is proved by the Lyapunov theory. Subsequently, the dynamic optimal control allocation algorithm is proposed for six flywheels, and a novel nonsingular fast terminal sliding mode controller is developed to obtain practical voltage control input for the flywheel drive control system. Finally, numerical simulations are carried out to validate the effectiveness of the proposed method.     

Type synthesis of deployable mechanisms for ring truss antenna based on constraint-synthesis method

Space deployable antenna is the key equipment in realizing the communication and data transmission between the spacecraft and the earth. In order to enrich the configurations of deployable antennas, the type synthesis of deployable mechanisms for ring truss antenna is conducted in this study. First, the principle of the constraint-synthesis method based on screw theory is briefly described, the structure of the ring truss deployable antenna and its folding principle are analyzed, and the ring truss mechanism is divided into upper edges, lower edges and linkages. Then, based on the constraint-synthesis method, the type synthesis of the basic unit edges is carried out, a series of basic unit mechanisms are obtained from combining the basic unit edge mechanisms, and five mechanism units with fewer joints and simple structures are selected. Furthermore, simulation models of the five ring truss deployable mechanisms are built in Solidworks and Matlab software, and the deploying process is verified by the movement simulation. Finally, mechanism characteristics of the five mechanisms are analyzed and discussed, and a prototype is manufactured, verifying the analysis in this paper. This research provides a new way for the type synthesis of spatial deployable mechanisms, and the ring truss deployable mechanisms obtained in this study can be well applied in the field of aerospace.     

基于边缘与非边缘分开处理的印刷品缺陷检测

针对印刷品缺陷检测问题,通过对经典缺陷识别算法的研究,提出了一种边缘点与非边缘点分开处理的印刷品检测缺陷识别算法。算法以统计过程原理为出发点,根据边缘点和非边缘点不同的像素特征,对非边缘点采用统计阈值法处理,对边缘点采用邻域平均值与梯度值相结合的算法处理。该算法经过实验证明,能够有效地剔除伪疵点,提取出真正的缺陷。     

Type synthesis of 2-DoF rotational parallel mechanisms actuating the inter-satellite link antenna

This paper focuses on the type synthesis of two degree-of-freedom (2-DoF) rotational parallel mechanisms (RPMs) that would be applied as mechanisms actuating the inter-satellite link antenna. Based upon Lie group theory, two steps are necessary to synthesize 2-DoF RPMs except describing the continuous desired motions of the moving platform. They are respectively generation of required open-loop limbs between the fixed base and the moving platform and definition of assembly principles for these limbs. Firstly, all available displacement subgroups or submanifolds are obtained readily according to that the continuous motion of the moving platform is the inter-section of those of all open-loop limbs. These subgroups or submanifolds are used to generate all the topology structures of limbs. By describing the characteristics of the displacement subgroups and submanifolds intuitively through employing simple geometrical symbols, their intersection and union operations can be carried out easily. Based on this, the assembly principles of two types are defined to synthesize all 2-DoF RPMs using obtained limbs. Finally, two novel categories of 2-DoF RPMs are provided by introducing a circular track and an articulated rotating platform, respectively. This work can lay the foundations for analysis and optimal design of 2-DoF RPMs that actuate the inter-satellite link antenna.     

波导功分器温漂问题研究

波导功分器是电路合成技术中的关键器件。文章在叙述波导功分器制作原理的基础上,设计出了1分3波导功分器,并对其温漂问题进行了研究,得器由于温漂的存在会使功分器的功率分配不均匀现象进一步恶化的结论,并提出了改进措施。     

微波双通带滤波器多项式综合技术

文章提出了一种新的微波双通带滤波器多项式综合技术,这种方法将频率转换与优化方法结合,与频率转换方法相比较,文章中提出的新方法不仅能够有效地综合出具有等波纹响应特性的对称双通带滤波器的s参数多项式,而且对于两个不对称度很高的双通带也同样有效。文章最后给出了相应的设计实例,验证了该方法对所有双通带多项式综合的有效性。     

空域CFAR处理方法综述

综述了空域恒虚警（Constanl False Alarm Rate,CFAR）处理研究的发展、现状和最新进展。首先,讨论了空域CFAR处理的概念及其在整个CFAR处理中所处的位置;然后,将空域CFAR处理算法分为ML类、OS类和自适应算法,介绍了每类CFAR算法的研究现状;最后,展望了空域CFAR处理算法的发展,指出...     

滑油温度传感器内部断路故障原因分析及改进

对某型温度传感器内部断路故障进行分析,通过X光成像、电子显微镜微观检查及对比试验等手段确定故障原因,并提出预防改进措施。     

Configuration synthesis of planar folded and common overconstrained spatial rectangular pyramid deployable truss units

Compared with non-overconstrained deployable units, overconstrained deployable units are widely used in space missions for their higher stiffness characteristics. Besides the performance of a three-step topological structural analysis and design of the rectangular pyramid deployable truss unit(PDTU), conducting a structural synthesis of an overconstrained deployable unit requires the determination of the relative position and direction of each kinematic axis. The structural synthesis of an overconstrained deployable unit is investigated based on screw theory and its topological structure. The possible overconstrained cases of the rectangular PDTUs are analyzed, and corresponding screw expressions are obtained. Thus, the rectangular PDTUs, which can be folded into a plane, are synthesized systemically, and a series of overconstrained rectangular PDTUs is obtained. Furthermore, the feasibility of the folded and deployed motions under one degree of freedom for those deployable units is verified in dynamical simulation by using ADAMS 2010.     

航空发动机系统的动力分析

以包含复杂转子系统及支承结构系统的发动机总体模型为研究对象, 进行动态特性及动响应分析。为合理解决计算的准确性与经济性之间的矛盾, 提出了模态阻抗综合分析法, 将整体系统动力学问题化为低阶运动方程求解。应用按本文方法编制的程序对某型航发进行了整体动应力计算, 结果与实际相符。