火星表面热环境对航天器热控影响分析

火星大气对太阳辐射产生吸收和散射作用,同时还将与火星表面航天器发生对流换热.热设计时难以直接评估对流、辐射和导热三种换热对航天器的影响,从而确定主要的控温途径.在调研火星表面辐射、大气等热环境的基础上,从线性化传热系数和对流辐射比的角度对比分析了辐射、对流和导热对航天器的影响.器表辐射传热系数随光学属性和温度的变化范围...     

终端短路涂层金属圆波导的电磁散射特性分析

本文用光学法与广义散射矩阵技术相结合的方法,根据波导在入射平面电磁波照射下所激励的波导模式,分析了终端短路金属圆波导的电磁散射特性。在此基础上,假设金属波导内壁涂层厚度τ远小于波导半径a,且波导入口段的涂层厚度从零线性增加至τ,运用微扰法求出终端短路涂层金属圆波导内各波导模的传播常数,从而获得涂层圆波导的电磁散射特性。通过计算机仿真,计算了终端短路涂层金属圆波导的雷达截面(RCS),并与相同条件下内壁无涂层金属圆波导的雷达截面进行比较,结果令人满意。     

气溶胶抑制尾喷口红外辐射的试验研究

在对气溶胶红外抑制机理研究的基础上，建立了一套发动机尾喷口模型试验台及气溶胶施放系统，通过气溶胶施放系统在尾喷流四周形成环形气溶胶层，降低尾喷台向外的红外辐射。试验对不同流速的尾喷流及二股流、不同的气溶胶施放位置、施放量及在不同的方位角上的气溶胶红外抑制效果作了测量与分析，得出一些初步结论，发现在二股流与尾喷流出口流速为１∶３，气溶胶质量浓度为３６．３ｇ／ｍ＾３时，其红外抑制量可达９０％以上。     

靶机红外目标模拟装置的研究

通过对一种靶机红外目标模拟装置的研究，介绍了这种装置的设计特点、参数选择和试验结果。该装置以固体燃料作为燃烧剂，其红外辐射强度主要决定于燃料的组分、工作温度、辐射体的材料以及辐射体的面积，而工作温度的选取是设计的关键。文中提出一种实用而简便的综合分析方法，根据装置所需要的红外辐射强度来预计其工作温度与结构尺寸，据此设计的装置实物经红外辐射特性测定后证明能满足预定指标要求。本文陈述的这种方法已被用于某靶机红外目标模拟装置的设计，并取得实际应用成果，对同类装置的设计和研究可资借鉴     

红外增强器辐射特性的测试和实验研究

本文对某靶机拖靶的红外增强器的红外辐射特征进行了实验研究,将红外增强器作为点源目标,对几种不同结构形式,在不同工作状态下,进行了地面现场实验测试。文中简要介绍了所使用的仪器和组合的红外测试系统,着重论述了红外增强器的辐射光谱特征、辐射能随时间和空间的分布情况、在多种工作状态下的表观有效红外辐射强度等红外辐射特征的实验测试方法,并对实验结果进行了分析。 实验表明:所测数据具有较好的重复性,相关参数具有明显的紧密相关性,其结果是可信的,为研制新型红外辐射源,提供了一种可供借鉴的探测系统和探测技术。     

Nanofillers modification of Epocast 50-A1/946 epoxy for bonded joints

Epocast 50-A1/946 epoxy was primarily developed for joining and repairing of composite aircraft structural components. The objective of the present work is to modify the Epocast epoxy resin by different nanofillers infusion. The used nanofillers include multi-walled carbon nanotubes（MWCNTs）, SiC and Al2O3 nanoparticles. The nanofillers with different weight percentages are ultrasonically dispersed in the epoxy resin. The sonication time and amplitude for MWCNTs are reduced compared to Al2O3 and SiC nanoparticles to avoid the damage of MWCNTs during sonication processes. The fabricated neat epoxy and twelve nanocomposite panels were characterized via standard tension and in-plane shear tests. The experimental results show that the nanocomposites materials with 0.5wt% MWCNTs, 1.5wt% SiC and 1.5wt% Al2O3 nanoparticles have the highest improvement in the tensile properties compared to the other nanofiller loading percentages.The improvements in the shear properties of these nanocomposite materials were respectively equal to 5.5%, 4.9%, and 6.3% for shear strengths, and 10.3%, 16.0%, and 8.1% for shear moduli. The optimum nanofiller loading percentages will be used in the following papers concerning their effect on the bonded joints/repairs of carbon fiber reinforced composites.     

飞机封闭腔室减重降噪优化方法

噪声水平是现代飞机封闭腔室设计的重要指标,设计中单纯地对壁板进行加肋处理虽能显著降低噪声但会大大增加结构质量,为此对由封闭腔室构成的结构-声耦合系统进行了减重降噪优化研究。基于结构-声耦合有限元模型,利用有限元软件ACTRAN计算了频谱加载时舱内的声压响应。通过试验对简化处理及数值计算进行了验证,并修正了相关模型参数。为了降低结构质量,以加强肋为边界对舱门壁板进行了分区,通过对各个区域壁板厚度及肋条截面积的优化设计,使系统动刚度分配更趋合理,降低了声辐射能量以及结构-声腔的耦合性,从而实现了在满足噪声约束条件下减轻结构质量的目标。本文的工作对实际工程中由加肋壁板所构成的类似结构的减重降噪设计有着较好的工程指导价值。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

某小型无人机中长波辐射特性测量及辐射强度反演

随着“自杀式”无人机集群的饱和式攻击在战场上发挥巨大威力,如何有效拦截是各国近年来研究的重要方向,而红外探测是最热门也是最高效的探测拦截手段之一。为此,开展某典型无人机目标中长波红外探测试验,获取典型某无人机目标辐射特性数据,完成中长波红外辐射强度反演。同时,考虑环境变化对红外探测的影响,为使用红外探测手段完成无人机目标拦截提供实测效果演示。本文研究结果可作为论证中长波对无人机目标探测差异的依据,以支撑探测体制的选择。     

某类跨大气层飞行器全航程红外辐射特性分析

针对某类跨大气层飞行器飞行过程中需要进出大气层,且飞行速度跨度大等特点,建立了不同空域、不同飞行速度下的机体头部受热模型。当在大气层内飞行时分别使用经验公式和Lees公式计算马赫数小于5和大于5时头部受热情况,当在大气层外飞行时建立了考虑太阳直射、地球反照和地球红外加热情况下的受热模型。利用普朗克定律得到了相同温度下不同波段的红外辐射能量占比情况。最后利用本方法对某类跨大气层飞行器进行了温度和红外辐射计算,得到的计算结果能够大致反映全航程头部温度和红外辐射变化情况。