空间原子氧环境对太阳电池阵的影响分析

空间原子氧是危害低地球轨道（LEO）航天器在轨性能的最主要空间环境因素之一,其强氧化性能够对包括太阳电池阵在内的航天器外表面暴露材料和组件造成危害。文章分析了某载人航天器在轨原子氧环境、原子氧对不同结构太阳电池阵所用材料的影响以及对太阳电池阵组件电性能的影响,结果表明原子氧对材料的作用能够引起太阳电池阵基板强度降低、电连接可靠性下降及电缆线护套失效等风险,材料的损伤会导致太阳电池组件电性能的下降。鉴于以上结果,作者建议在今后LEO长寿命航天器太阳电池阵研制中,应对原子氧环境条件进行详细设计;同时开展组件级试验,以对电池阵原子氧防护设计的有效性进行验证。     

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Fused deposition modeling (FDM) has unique advantages in the rapid prototyping of thermoplastics which have been developed in diverse fields. However, although great efforts have been made to optimize FDM process, the mechanical properties of printed parts are limited by the weak interlamination bonding as well as the poor performance of raw filaments used, such as acrylonitrile butadiene styrene (ABS), polylactic acid (PLA). Adding fibers into thermoplastic matrix and preparing high-performance filaments have been indicated to enhance the properties of fabricated parts. Recently, heat-resistant polyetheretherketone (PEEK) and its fiber reinforced composites were proposed for FDM process due to overcoming the limitation of equipment and process. However, few researches have been reported on the effects of FDM-3D printing parameters on the mechanical properties of fiber reinforced PEEK composites. Therefore, 5wt% carbon fiber (CF) and glass fiber (GF) reinforced PEEK composite filaments were prepared respectively in this study. The effects of various printing parameters including nozzle temperature, platform temperature, printing speed and layer thickness on the mechanical properties (including tensile strength, flexural strength and impact strength) were surveyed. To analyze the microstructure and failure reasons of printed CF/PEEK and GF/PEEK samples, the tensile fractured surfaces were investigated via scanning electron microscope (SEM).     

电连接器接触件微动磨损有限元仿真分析

航空电连接器在服役过程中受到振动、冲击或温度变化等外界激励时,内部的接触件可能会发生微动磨损,导致接触界面的匹配状态发生变化,影响信号和功率传输。基于 Archard模型,对接触件微动磨损行为进行了理论分析和有限元仿真分析。通过对某微动磨损试验的数据进行分析,计算了镀金铜合金的磨损系数,并用于微动磨损仿真当中。通过仿真分析,得到了表面接触在不同微动周期的状态变化规律、变形和应力分布情况,发现接触区域表面和近表面的中心位置有明显的应力集中现象,接触状态在第 1∕4和 3∕4周期之后,会由滑动接触转变为黏着接触,状态的变化具有迟滞效应,微动磨损量随着微动距离的增加而线性变化。     

自动判读系统在载人航天器电测中的应用

为提高载人航天器电测的效率和准确性,文章引入自动判读系统。该系统判读知识表达可支持多种运算符和函数,知识覆盖面广;推理机的设计充分考虑了载人航天器测试的特点,数据判读准确性高,实时性好。系统目前已实现参数判读、指令判读、事件判读和指令监视等功能,在后续载人航天器电测中将发挥更重要的作用。     

Evaluation and utilization of CloudSat and CALIPSO data to analyze the impact of dust aerosol on the microphysical properties of cirrus over the Tibetan Plateau

The present study elucidates on the evaluation of two versions (V3 and V4.10) of vertical feature mask (VFM) and aerosol sub-types data derived from the Cloud-Aerosol LiDAR and Infrared Pathfinder Satellite Observations (CALIPSO), and its utilization to analyze the impact of dust aerosol on the microphysical properties of cirrus over the Tibetan Plateau (TP). In conjunction to the CALIPSO, we have also used the CloudSat data to study the same during the summer season for the years 2007–2010 over the study area 25–40°N and 75–100°E. Compared to V3 of CALIPSO, V4.10 was found to have undergone substantial changes in the code, algorithm, and data products. Intercomparison of both versions of data products in the selected grid between 30–31°N and 83–84°E within the study area during 2007–2017 revealed that the VFM and aerosol sub-types are in good agreement of ～95.27% and ～82.80%, respectively. Dusty cirrus is defined as the clouds mixed with dust aerosols or existing in dust aerosol conditions, while the pure cirrus is that in a dust-free environment. The obtained results illustrated that the various microphysical properties of cirrus, namely ice water content (IWC), ice water path (IWP), ice distribution width (IDW), ice effective radius (IER), and ice number concentration (INC) noticed a decrease of 17%, 18%, 4%, 19%, and 10%, respectively due to the existence of dust aerosol, consistent with the classical “Twomey effect” for liquid clouds. Moreover, the aerosol optical depth (AOD) showed moderate negative correlations between ?0.4 and ?0.6 with the microphysical characteristics of cirrus. As our future studies, in addition to the present work undertaken, we planned to gain knowledge and interested to explore the impact of a variety of aerosols apart from the dust aerosol on the microphysical properties of cirrus in different regions of China.     

用于转子系统的气膜密封阻尼结构稳态特性

针对航空发动机转子既转动又进动的运转情况,推导用于转子系统的带金属橡胶弹性外环的气膜密封阻尼结构(gas film seal damper,GFSD)雷诺方程.基于GFSD运动方程和位移协调关系,建立转子－气膜－金属橡胶三者之间的流固耦合关系,确定稳态压力场求解流程,并提出金属橡胶刚度的定量设计方法.采用有限差分法求解稳态压力场,研究GFSD工作参数和结构参数对稳态特性的影响,为GFSD结构参数设计提供参考,最后与直通式篦齿封严的泄漏量进行比较.结果表明:合理设计金属橡胶刚度能够使GFSD自适应地调节气膜间隙;在保证动压润滑的基础上,选取大长径比、小金属橡胶刚度和密封间隙能够使GFSD具有良好的稳态特性;GFSD的泄漏量远小于直通式篦齿封严,能够满足现代航空发动机中高进出口压比下的封严需要.      

Microstructure, Mechanical Properties and Oxidation Resistance of Nb-22Ti-14Si-2Hf-2Al-xCr Alloys

Nb-22Ti-14Si-2Hf-2Al-xCr (x=2, 6, 10, 14, 17 at%) alloys are prepared by arc-melting under argon atmosphere. Microstructural characteristics, mechanical properties and oxidation resistance of the arc-melted alloys are investigated. At 2 at% Cr content, the microstructure is composed of Nbss, Nb3Si and a small quantity of Nb5Si3, when the Cr contents increase, Nb3Si disappears. For the high Cr content (x ≥ 10 at%) alloys, besides the Nbss and Nb5Si3, Cr2Nb is also detected. With the increase of Cr content, the volume fractions of Cr2Nb and Nb5Si3 increase, while that of Nbss increases firstly and then begins to degrade when the Cr content is higher than 6 at%. For the alloy with 2 at% Cr, the room temperature fracture toughness is about 14.5 MPa·m1/2, but badly decreases to about 8.5 MPa·m1/2, when the Cr contents increase. Vickers hardness of Nbss tends to increase linearly from about 400 to 500, while that of silicides is not sensitive to Cr contents, about 950. The appearance of Cr2Nb phase significantly improves the high temperature oxidation resistance of the alloys with high Cr contents. The isothermal oxidation tests show that the oxidation kinetics of the alloys with various Cr contents follows parabolic oxidation kinetics.     

纤维素甘油醚硝酸酯粘合剂及其推进剂的力学性能

利用X-ray衍射、拉伸实验和动态力学性能DMA实验研究了纤维素甘油醚硝酸酯(NGEC)的结晶度、NGEC及其推进剂的力学性能和动态力学性能,借助扫描电镜观察了NGEC基改性双基推进剂的断裂形貌,并通过流动性实验探索了NGEC全部与部分取代NC的改性双基推进剂的热加工工艺性能。结果表明:与NC相比,NGEC的结晶度和力学强度略低、延伸率较高、玻璃化转变温度低且转变温度范围宽;加入NGEC,可降低高固体含量改性双基推进剂的脱湿现象,有利于提高其力学性能;粘合剂体系中NGEC的含量对其改性双基推进剂的玻璃化转变的α松弛影响较大,随着NGEC含量的增加α松弛温度明显降低,而对β松弛的影响较小;与NC相比,NGEC的加入降低了改性双基推进剂的流动性实验出药压力,提高了出药速度,具有良好的热塑性及热加工安全性。     

气动执行器与电动执行器的运行能耗分析

分析了气动执行器和电动执行器能量消耗过程,建立了气动执行器运行能耗计算模型,搭建了气动执行器和电动执行器的运行能耗实验系统.通过实验数据分析,得出两种执行器运行能耗的结论:①在长时间保持负载或作动不频繁的工况下,气动执行器比电动执行器更节能,在频繁作动的工况下,电动执行器比气动执行器更节能;②在各种工况下,气动执行器的运行功率波动不大,电动执行器的运行功率波动较大.     

气氧/丙烷小推力发动机设计与实验

为适应小推力发动机无毒、无污染、高性能、低成本的发展趋势,设计了一种以气氧(GO₂)/丙烷(C₃H₈)为推进剂的发动机.采用层板式头部喷注器、利用喷嘴间隙实现电火花点火的独特点火方案、通过边区喷嘴进行气膜冷却,同时设计了发动机实验系统并开展了初步实验研究.实验结果表明:实验系统设计合理;发动机点火方案可靠、燃烧稳定、热防护效果良好,为进一步的研究奠定了基础.