Energy conversion of the flare due to direct electric fields from the sheared reconnection

In this paper we present a new mechanism of the main energy conversion of the solar flare. Since a flare inducing prominence (flux tube) rises V_z ? 300 km s⁻¹, the plasmas below it cannot continuously eject with Alfvén speeds of V_A = 3000 km s⁻¹ but probably with V_z ≈ ±100 km s⁻¹. Plasma up and downflows with V_A will within a short duration be blocked between the chromosphere where reconnected flux tubes are piling up, and the slowly rising flux rope. Hence the Petschek slow shock mechanism is difficult to be realized as a major energy converting mechanism.     

波音757客改货航电系统改装

简要介绍了波音757-200客改装货时航电系统改装的主要工作内容和改装工作中的关键点,以及为保证整体改装工作的进度而实施的的创新手段。     

HSDB网络稳定性的研究

高速数据总线（ＨｉｇｈＳｐｅｅｄＤａｔａＢｕｓ，ＨＳＤＢ）是新一代航空电子系统的数据总路线，ＨＳＤＢ网络实际上是基于线性令牌总线的一个专用计算机局域网，在网络上负载较重且时间非苛刻的消息到达是一般过程的条件十分别讨论了网络的局域和全域稳定性，并导出了保证整个网络稳定的令牌握有定时器最小值，同时给出了如何根据应用去调整得到的理论值。     

微特电机全温度自动补偿原理及参数的确定

设计了全温度自动补偿电路，提高微特电机主要性能指标的温度稳定性．它的工作原理简单；电路参数的确定采用计算机辅助计算方法——具有连续延伸和自动改变初值的加速寻优的单纯形方法，不仅快捷、准确，而且稍加修改也可适用于任何多元非线性方程组的求解     

面向深空探测的电磁帆推进技术研究进展

电磁帆是一类利用太阳风驱动的无工质或少工质新型推进技术,在需要推力器长时间工作的深空探测任务中具有非常广阔的应用前景。首先介绍了电磁帆的基本概念和主要分类,其次分别介绍了电帆、纯磁帆和磁等离子体帆三类推进方式的系统组成和工作原理,重点介绍了各自的研究现状,并梳理出了相关关键技术,同时介绍了等离子体磁罩技术。最后对电磁帆推进技术研究进展进行了总结,为国内开展此方面研究提供了研究方向和发展思路。     

超静超稳卫星碰振动力学建模

针对分离式卫星载荷模块(PM)受到扰动时可能与服务模块(SM)发生碰撞的问题，综合音圈电机反电动势(back-EMF)和柔性线缆动力学的效应，基于牛顿欧拉法建立了分离式卫星(DFP)载荷模块动力学模型。基于Hertz接触理论，推导了分离式卫星碰撞过程中连续接触力模型，并分析了碰撞过程中产生的接触力对载荷模块指向精度和指向稳定度的影响。数值仿真结果表明，碰撞使得载荷模块指向精度和指向稳定度下降5个数量级，碰撞后载荷模块可再次恢复到超静超稳工作状态，恢复时间超过1400 s。本文建立的碰撞模型对研究分离式卫星碰撞规避和碰撞控制具有重要意义。     

地下原油无缆电加热系统可靠性措施的计算机仿真与优化决策

本文根据给定的油井地质资料,用计算机对其进行拟合再现,着重讨论了井下原油无缆电加热系统的可靠性措施及其计算机仿真与优化决策方法。     

基于轮毂电机的电动汽车再生制动研究

基于轮毂电机驱动的电动汽车的结构特点以及轮毂电机低转速、高转矩的特点,提出了轮毂电机再生制动方法。 为了恢复最大制动能量,在中等强度制动条件下通过轮内电机输出车辆减速的所有制动转矩。 由AMESim软件建立液压制动系统和轮毂电机驱动系统的车辆动力学模型。 通过NEDC循环和FTP75循环对车辆驾驶条件进行了仿真。仿真结果表明:采用轮内电机制动方式,制动能量回收率显著提高,电动车的能源效率提高30%以上。     

A novel integrated self-powered brake system for more electric aircraft

Traditional hydraulic brake systems require a complex system of pipelines between an aircraft engine driven pump (EDP) and brake actuators, which increases the weight of the aircraft and may even cause serious vibration and leakage problems. In order to improve the reliability and safety of more electric aircraft (MEA), this paper proposes a new integrated self-powered brake system (ISBS) for MEA. It uses a hydraulic pump geared to the main wheel to recover a small part of the kinetic energy of a landing aircraft. The recovered energy then serves as the hydraulic power supply for brake actuators. It does not require additional hydraulic source, thus removing the pipelines between an EDP and brake actuators. In addition, its self-powered characteristic makes it possible to brake as usual even in an emergency situation when the airborne power is lost. This paper introduces the working principle of the ISBS and presents a prototype. The mathematical models of a taxiing aircraft and the ISBS are established. A feedback linearization control algorithm is designed to fulfill the anti-skid control. Simulations are carried out to verify the feasibility of the ISBS, and experiments are conducted on a ground inertia brake test bench. The ISBS presents a good performance and provides a new potential solution in the field of brake systems for MEA.     

多电飞机主发电机供电条件模拟装置设计

多电飞机主发电机要接入电网向电网供电,须要满足很多条件。首先要使准备接通的发电机励磁,然后当发电机转速正常,发电机电压达到要求后,并在外电源已经断开的条件下,接通发电机接触器,使发电机向电网供电。设计基于C8051单片机及外围电路的装置,对多电飞机主发电机接入电网的控制条件进行模拟,并将结果显示在装置的LCD(Liquid Crystal Display,简称LCD)显示屏上。该装置的设计包括硬件电路设计和软件程序编写。最后对装置进行调试与验证,实验结果能够达到设计初衷。