金属微滴水平喷射关键参数调控机制及试验

均匀金属微滴喷射3D打印技术是一种极具应用前景的空间金属增材制造技术,明晰其重力敏感度是实现该技术空间化应用的前提。在地基条件下,将熔滴喷射沉积方向翻转至水平状态是直观反映其打印过程重力效应的有效方法。针对熔滴水平稳定喷射调控的难题,建立了熔滴水平喷射流体力学模型及压电激振动力学模型,通过试验,探究了熔滴水平喷射不稳定形成机制,明晰了不同喷射行为下的激振特性,揭示了熔滴水平稳定喷射调控规律。结果表明：压电模块驱动信号（脉宽、幅值）对激振杆振动特性影响极为显著,激振杆行程随幅值或脉宽的增加呈现出先增加后减小的变化规律;通过改变激振杆振动特性可调控熔滴直径、初始喷射速度及喷射稳定性,熔滴直径随幅值增大而减小,但受脉宽影响不大,而喷射速度与幅值及脉宽均正相关。基于此,试验得到了尺寸均匀的金属熔滴,并水平沉积打印出与设计模型一致的结构特征。     

垂直起降运载火箭返回轨迹不确定性优化

针对垂直起降运载火箭一子级在返回着陆的过程中存在的参数不确定性,提出了一种基于非侵入式多项式混沌展开的序列优化和可靠度评估的返回轨迹不确定性优化方法。首先,建立了返回多飞行段轨迹在确定性条件下的优化模型。然后,为同时兼顾轨迹的鲁棒性和可靠性,建立了由鲁棒最优目标函数、基于可靠度的路径约束和鲁棒等式约束组成的不确定性返回轨迹优化模型。最后,基于非侵入式多项式混沌展开方法对鲁棒目标函数和等式约束进行量化处理,将原随机鲁棒优化问题转化为高维状态空间中的等价确定性优化问题;为提高路径约束的可靠度评估效率,基于非侵入式多项式混沌展开方法对最可能点法进行改进,进一步发展了序列优化和可靠度评估策略。数值仿真结果表明,所提出的不确定性优化方法具有较好的鲁棒性,可以满足工程可靠性指标要求,同时还具有较高的精度和计算效率。     

一种新型充气式重力梯度杆的研制和在轨展开试验

文章对中国“新技术验证一号”卫星搭载的一种新型充气式重力梯度杆的研制和在轨试验情况进行了介绍。重力梯度杆在小卫星控制领域中具有较好的应用前景,而充气结构具有轻质、占用空间小、发射成本低的特点,采用充气式重力梯度杆可避免传统机械式重力梯度杆质量重、尺寸大和机构复杂的缺点,它以充气伸展臂为主要结构形式,通过充气展开伸直成为重力梯度杆,既作为卫星重力梯度杆又通过在轨试验验证空间充气展开结构的性能。在轨试验结果表明充气式重力梯度杆展开稳定、有序、性能可靠,可以满足小卫星的性能和功能要求。该试验也是中国首个成功的充气展开结构在轨技术验证试验,标志着中国的充气展开结构技术初步具备了工程化能力。     

复合材料层合板宽度尺寸效应的混合模型

研究了影响复合材料层合板强度尺寸效应的两个主要影响因素:统计尺寸效应和自由边效应。统计尺寸效应采用经典的Weibull最弱环理论描述。提出了"废宽度"的概念,将自由边效应和最终失效强度联系起来。综合这两种效应,得到了影响纤维增强复合材料(Fiber reinforced plastic,FRP)宽度尺寸效应的混合模型。引用D Kujawski的试验数据对混合模型进行了验证,结果表明:混合模型能够准确地预测不同宽度试件的最终失效强度。     

基于“以证代考”模式的高职涉外旅游专业人才核心能力培养探析

改革传统的教学评价手段,注重实操,减少笔试是高职院校一系列教学改革中的重要环节。＂以证代考＂是一种强调实操,体现实际能力的考核方式。本文以导游证为例,在设计、实施、促进能力培养的效果和存在问题等方面做一些探讨。     

New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

Optimization of geosynchronous satellite constellation for independent regional navigation and positioning in Middle East region

Regional Navigation and positioning systems using geosynchronous satellites are emerging for different parts of the world. Optimal constellation geometry achievement for a set of geosynchronous satellites is a key sector in designing of such systems. Genetic algorithm is applied for optimization of constellations with 6 and 7 satellites which is to be used in Middle East region where these systems have been deprived of. Based on the fact that the coverage criterion is not sufficient enough to guarantee a good navigation service, positioning process by the satellite systems is discussed and the performance of the system on the basis of position dilution of precision is collected as the fitness criterion. Placing the satellites in groups to pass over the same ground track is applied as a constraint to the genetic algorithm. By simulation, performance of the best obtained results and GPS are compared in terms of position dilution of precision, visibility and the required epochs (time span) to resolve the ambiguities with a 99% success rate, in this region. Also, capability of the GA for such problems is demonstrated.     

Applications of tuned mass dampers to improve performance of large space mirrors

In order for future imaging spacecraft to meet higher resolution imaging capability, it will be necessary to build large space telescopes with primary mirror diameters that range from 10 m to 20 m and do so with nanometer surface accuracy. Due to launch vehicle mass and volume constraints, these mirrors have to be deployable and lightweight, such as segmented mirrors using active optics to correct mirror surfaces with closed loop control. As a part of this work, system identification tests revealed that dynamic disturbances inherent in a laboratory environment are significant enough to degrade the optical performance of the telescope. Research was performed at the Naval Postgraduate School to identify the vibration modes most affecting the optical performance and evaluate different techniques to increase damping of those modes. Based on this work, tuned mass dampers (TMDs) were selected because of their simplicity in implementation and effectiveness in targeting specific modes. The selected damping mechanism was an eddy current damper where the damping and frequency of the damper could be easily changed. System identification of segments was performed to derive TMD specifications. Several configurations of the damper were evaluated, including the number and placement of TMDs, damping constant, and targeted structural modes. The final configuration consisted of two dampers located at the edge of each segment and resulted in 80% reduction in vibrations. The WFE for the system without dampers was 1.5 waves, with one TMD the WFE was 0.9 waves, and with two TMDs the WFE was 0.25 waves. This paper provides details of some of the work done in this area and includes theoretical predictions for optimum damping which were experimentally verified on a large aperture segmented system.     

A hybrid attitude controller consisting of electromagnetic torque rods and an active fluid ring

In this paper, a novel hybrid actuation system for satellite attitude stabilization is proposed along with its feasibility analysis. The system considered consists of two magnetic torque rods and one fluid ring to produce the control torque required in the direction in which magnetic torque rods cannot produce torque. A mathematical model of the system dynamics is derived first. Then a controller is developed to stabilize the attitude angles of a satellite equipped with the abovementioned set of actuators. The effect of failure of the fluid ring or a magnetic torque rod is examined as well. It is noted that the case of failure of the magnetic torque rod whose torque is along the pitch axis is the most critical, since the coupling between the roll or yaw motion and the pitch motion is quite weak. The simulation results show that the control system proposed is quite fault tolerant.     

Simple method for performance evaluation of multistage rockets

Multistage rockets are commonly employed to place spacecraft and satellites in their operational orbits. Performance evaluation of multistage rockets is aimed at defining the maximum payload mass at orbit injection, for specified structural, propulsive, and aerodynamic data of the launch vehicle. This work proposes a simple method for a fast performance evaluation of multistage rockets. The technique at hand is based on three steps: (i) the flight-path angle at each stage separation is guessed, (ii) the spacecraft velocity is maximized at the first and second stage separation, and (iii) for the last stage the thrust direction is obtained through the particle swarm optimization technique, in conjunction with the use of the Euler–Lagrange equations and the Pontryagin minimum principle. The coast duration at the second stage separation is optimized as well. The method at hand is extremely simple and easy-to-implement, but nevertheless it proves to be capable of yielding near-optimal ascending trajectories for a multistage launch vehicle with realistic structural, propulsive, and aerodynamic characteristics. The solutions found with the technique under consideration can be employed either for a rapid evaluation of the multistage rocket performance or as guesses for more refined optimization algorithms.