A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

某型飞机阻力伞抛放系统故障模式分析

针对某型飞机阻力伞系统放伞、抛伞故障,通过分析系统的组成、工作原理、常见故障模式以及故障原因,提出了改进建议,为该型飞机阻力伞抛放系统故障的排除提供思路。     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

基于中介理论与交通特性的终端区态势评价

终端区交通态势的准确度量是制定并实施流量管理措施的重要依据之一。通过提取终端区宏观与微观的交通特性,从进离场及总量3个维度构建态势的指标描述,并进一步采用中介理论中的真值程度度量与熵权法建立了一种客观的终端区飞行区交通态势模糊综合评价方法,实现客观、准确的交通态势判别与样本间量化比较。选取国内典型繁忙终端区的实测数据,验证了评价方法与特性指标的有效性。     

柴油发动机热管理系统的高度特性

基于空中和高原环境的特点,研究了柴油发动机散热器传热性能的高度特性;进一步建立了发动机热管理系统的流动和传热模型,研究了热管理系统的高度特性;给出了基于最小功耗原则的热管理系统运行参数匹配方法.在固定系统热负荷条件下的计算结果表明:随着海拔高度的增加,在空中环境下,散热器的散热性能先上升后下降,热管理系统中冷却液和润滑油温度先下降后上升,热管理系统所需的最小功耗先减小后增加;在高原环境下,散热器的散热性能随高度增加大幅下降,热管理系统中冷却液和润滑油温度大幅上升,发动机出现过热问题,为了给发动机提供足够的散热能力,热管理系统所需要的最小功耗随着海拔高度的增加而大幅增加.      

温度对飞机燃油射流泵工作特性影响

建立了射流泵数学模型,采用数值计算方法对其工作特性进行了模拟,搭建了实验台,采用RP-3燃油,通过实验数据验证了模型的正确性.在此基础上,分别选择了RP-3和JET-A两种燃油,计算了从-40℃~40℃温度下,不同操作压力对射流泵流量比的影响.结果表明:燃油温度高于0℃时,温度对射流泵工作特性影响并不明显,随着温度的降低,射流泵性能与标准温度下（20℃）偏差越来越大,且压比越高此偏差越明显.当温度高于0℃时,采用RP-3和JET-A燃油性能相差不大,RP-3燃油性能略优于JET-A燃油,但是在低温下,RP-3燃油性能远高于JET-A燃油.因此当燃油温度较低且压比较高时,必须充分考虑温度对射流泵特性的影响.      

平板式预膜喷嘴初次雾化特性试验

为深入了解平板式预膜喷嘴初次雾化特性,试验研究不同进口条件对平板式预膜喷嘴初次雾化特性的影响规律。试验采用了背光照明和片状激光照明相结合的高频拍摄手段分别获得液膜俯视和侧视破碎形态,同时运用本征正交分解(POD)法和液膜边缘定位等分析方法进行光学图像结果后处理,获得表征平板式预膜喷嘴初次雾化特性三个物理量:液膜波动频率、破碎距离和横向不稳定波长。试验结果表明:①通过分析侧视和俯视破碎形态,平板式预膜喷嘴液膜破碎形态可分为三类:末端破碎、波浪脱落和表面剥离,进口韦伯数对预膜喷嘴破碎形态的影响占主导地位;②把POD法和液膜边缘定位方法等相结合方法应用到高频非接触光学喷嘴雾化图像的后处理分析中,是一种非常有效的数据后处理方法;③液膜初次雾化特性主要受到进口韦伯数和气液动量比的影响,破碎距离和横向不稳定波长都随进口韦伯数的增加而降低,液膜表面不稳定波动频率随进口韦伯数的增加而增加,所获得的经验关系式与试验数据吻合较好。所获得的进口参数对液膜破碎形态和雾化特性的影响规律为喷嘴后续优化设计提供了依据。     

吸气式电推进系统可行条件分析

吸气式电推进系统作为有可能实现长寿命超低轨飞行的技术而被关注。根据不同轨道环境条件,采用管状结构进气道、以及机械增压的吸气方式,讨论了吸气式电推进系统所需的可行条件。分析表明,在轨高度180~240km,航天器所需总功耗与迎风面之比需要大于2kW/m2,电推力器比冲需大于4×104m/s,方可满足推阻平衡需求。分析得出,实现吸气式系统在地球轨道的运用,关键技术在于增加气体收集效率并且降低收集功耗,同时电推力器的效率还需进一步提升。     

R141b在圆形微通道内的沸腾换热实验研究

为提高换热强度、解决设备内部高热流密度散热问题,采用实验方法研究R141b在不同直径(D=0.5mm和1.0mm)水平圆形微通道内的沸腾换热特性,分析了热流密度(q=2.0kW/m~2～47.6kW/m~2)、质量干度(x=0～0.6)、质量流速(G=111.11kg/(m~2·s)～333.33kg/(m~2·s))的变化对平均传热系数h的影响,探究不同情况下影响沸腾换热的主导因素。实验研究表明:平均传热系数h随热流密度q的增加而减小,在不同范围内减小速率有明显差异;热流密度q=2kW/m~2～5kW/m~2时质量流速G对平均传热系数h影响较明显,热流密度较高时质量流速G对换热影响很小;在质量流速G=111.11kg/(m~2·s)～333.33kg/(m~2·s),质量干度x0.3时,平均传热系数h随质量干度x增加而明显下降,在设计微通道换热器时应尽量使R141b处于初始沸腾阶段以获得更好换热效果,并采取一定措施预防干度过高引起的换热恶化。     

直背式轿车加速行驶气动阻力的计算

用CFD方法对直背式轿车加速过程中非定常外流场进行了数值模拟,计算出不同速度及加速度情况下汽车的气动阻力.结果表明某一速度和加速度情况下气动阻力主要与此刻的速度和加速度有关,其他因素对它的影响较小,并通过两次线性拟合,得出阻力与速度及加速度的计算公式,该公式可以直接计算出汽车在加速行驶时在某一速度和加速度值下的气动阻力.