高空飞艇螺旋桨优化设计与气动性能车载试验

结合某高空飞艇螺旋桨的总体设计方案要求,完成螺旋桨的优化设计以及气动性能车载试验.采用叶素动量理论作为螺旋桨气动性能的计算方法,并通过风洞试验验证了该方法的可靠性.结合遗传算法对螺旋桨的弦长和扭转角进行了优化,使螺旋桨更加高效轻质,优化后螺旋桨设计点的气动效率增加了2.3%.建立螺旋桨车载试验测控系统,可以改变试验海拔高度和大气参数,得到优化设计螺旋桨不同工况的气动性能.试验结果表明,相同转速和来流条件下,海拔越高,螺旋桨的推力和扭矩越小.海拔为3-6km时,全尺寸高空飞艇螺旋桨计算推力和扭矩与试验结果的平均相对误差分别为2.8%和9.2%,两者基本吻合,从而验证了高空飞艇螺旋桨车载试验的准确性.      

高度欠膨胀声速射流的自相似特性

构建了高压气体射流模型和高分辨率的计算网格,对喷压比（NPR）为5.60、流动雷诺数Re为105量级的高度欠膨胀射流进行了三维大涡模拟（LES）计算.讨论了时均的射流近场结构,发现大涡模拟成功捕捉到了高度欠膨胀射流近场的典型波系结构,并与文献结果吻合较好.研究着重定量考察流向速度和氮气质量分数的分布规律,以揭示高度欠膨胀射流的自相似特性.结果表明:在射流核心区之后,不同流向位置上流向速度和氮气质量分数沿径向的分布呈现出与亚声速射流类似的自相似特性.但射流流场开始呈现自相似的位置仍然为超声速,这是高度欠膨胀射流自相似特性的独有特征.提出了高斯拟合公式,在靠近和远离射流中心线的区域内均可较好地表征射流的自相似特性.此外,还考察了射流剪切层的发展特征,比较了计算得到的射流剪切层增长率与先前实验测量结果的差异,并分析了其中可能的原因.      

基于相似理论的月球车月面牵引性能预测

引入相似理论对月球车的轮土交互系统进行研究,建立了月壤-车轮交互系统的地面力学相似模型,针对原位月壤内聚力较小的特点,提出了一种无需改变车轮尺寸、以模拟月壤为土壤介质的模型试验方法,对月面重力环境下月球车轮的牵引性能进行预测.利用室内土槽试验和颗粒流仿真相结合的方法对该模型试验方法的有效性进行验证,验证结果与模型试验的理论分析结果较为接近,表明该法具有较好的可行性和有效性,可考虑用于预测月球车的月面牵引性能.     

Optimization of communication network topology for navigation sharing among distributed satellites

Navigation sharing among distributed satellites is quite important for coordinated motion and collision avoidance. This paper proposes optimization methods of the communication network topology to achieve navigation sharing. The whole communication network constructing by inter-satellite links are considered as a topology graph. The aim of this paper is to find the communication network topology with minimum communication connections’ number (MCCN) in different conditions. It has found that the communication capacity and the number of channels are two key parameters affecting the results. The model of MCCN topology for navigation sharing is established and corresponding method is designed. Two main scenarios, viz., homogeneous case and heterogeneous case, are considered. For the homogeneous case where each member has the same communication capacity, it designs a construction method (Algorithm 1) to find the MCCN topology. For the heterogeneous case, it introduces a modified genetic algorithm (Algorithm 2) to find the MCCN topology. When considering the fact that the number of channels is limited, the Algorithm 2 is further modified by adding a penalized term in the fitness function. The effectiveness of these algorithms is all proved in theoretical. Three examples are further tested to illustrate the methods developed in this paper.     

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.     

融合粗糙集与D-S证据理论的航空装备故障诊断

针对航空电子装备故障诊断中出现的多源诊断信息存在冲突的情况,基于粗糙集与证据理论在处理不确定问题时的优势,提出了一种融合粗糙集与证据理论的故障诊断方法.该方法利用粗糙集将信息源给出的诊断数据转化为证据理论中的mass函数,进行结果融合.同时,该方法给出边界粗糙熵的定义,并基于边界粗糙熵获得反映各信息源在诊断融合过程中重要度的动态权重参数,提出一种新的证据理论的冲突合成规则.仿真实验表明,该方法可以有效地提升诊断信息融合结果的准确性,在航空电子装备故障诊断方面有较好的实用价值.      

高精度法矢下切割面自适应的凸曲面射线寻迹

针对电大尺寸目标难以精确解析表达带来的一致性几何绕射算法应用难问题,提出了基于三角网格、适用于任意凸曲面的射线寻迹（TM-tracing）算法。应用工程中较易获取的三角网格及其协议,设计了一种满足快速多边搜索条件的网状数据存储链表;提出了满足寻迹要求的高精度法矢求解算法;采用切割面自适应调整的弧形拟合寻迹方法实现了爬行波寻迹算法;结合一致性几何绕射理论（UTD）实现了暗区场值求解算法。任意网格曲面射线寻迹结果表明:本文提出的寻迹算法适用于包括球、柱和锥在内的任意光滑凸曲面,寻迹偏差小于1.61%,寻迹速度为2.8 s,具有一定的工程应用价值。      

我国航天运输系统成就与展望

我国运载火箭起步于20世纪60年代,经过半个世纪的发展,共经历了5个阶段,研制了4代17种运载火箭。具备发射低、中、高不同轨道,不同有效载荷的能力。本文对我国航天运输系统发展历程和成就进行了总结,并基于发展成果和未来发展需求,对航天运输系统未来发展规划进行了展望。     

一种地月转移轨道中途修正的制导算法

针对地月转移轨道中途修正问题,提出了一种求解修正速度增量的制导算法。该算法由初值设计和精确解求解两部分组成。首先,利用伪状态理论,通过简单迭代设计中途修正的初值,并通过Vinti预报方法修正了地球扁率的影响。然后,在求解精确解时,提出了一种基于伪状态理论的状态转移矩阵解析算法。该算法通过设计高精度的初值,降低了求解地月转移轨道中途修正问题的难度,而且避免了传统数值方法计算状态转移矩阵的复杂性。数值仿真结果表明,该算法可有效求解中途修正问题。     

冗余系统两种应力-强度分布模型的可靠度计算

本文运用应力-强度干涉理论,说明如何确定相同设备(或元件)构成的冗余系统的可靠性。讨论了冗余系统的并联和从n中取k两种结构形式的数学模型,推导了应力和强度服从瑞利分布的并联冗余系统,以及应力和强度分别服从麦克思韦分布和瑞利分布n中取k冗余系统的数学公式。最后,给出这两个模型在应力作用下,对应于不同的强度参数,设备或元件的可靠性曲线,直观地说明应力强度参数的改变对可靠性的影响。