积木式方法与试验金字塔的历史沿革与发展趋势

采用积木式方法构建试验金字塔是目前已经被广泛接受的用来完成大型飞机结构强度验证的基本手段。本文概述了积木式方法和试验金字塔的发展历程和趋势，介绍了不同型号的美军机在研制过程中所建立的强度验证试验金字塔的统计结果，并且从试验层级、对象、目的和类型等四个方面比较了试验内容的数量与经费占比，由此来说明基础层级试验验证工作在强度验证试验金字塔中重要性和经济性。通过对虚拟试验在强度验证工作中的发展趋势、应用和限制的介绍，为顺利完成相关的全尺寸部件和整机的强度验证提供可靠的保障手段。     

Solar cycle and latitude dependence of high-beta suprathermal plasma conditions in interplanetary space between 1.3 and 5.4 AU

The analysis of energetic particles and magnetic field measurements from the Ulysses spacecraft has shown that in a series of events, the energy density contained in the suprathermal tail particle distribution is comparable to or larger than that of the magnetic field, creating conditions of high-beta plasma. In this work we analyze periods of high-beta suprathermal plasma occurrences (β_ep > 1) in interplanetary space, using the ratio (β_ep) of the energetic particle (20 keV to ∼5 MeV) and magnetic field energy densities from measurements covering the entire Ulysses mission lifetime (1990–2009) in order to reveal new or to reconfirm some recently defined interesting characteristics. The main key-results of the work are summarized as follows: (i) we verify that high-beta events are detected within well identified regions corresponding mainly to the vicinity of shock surfaces and magnetic structures, and associated with energetic particle intensity enhancements due to (a) reacceleration at shock-fronts and (b) unusually large magnetic field depressions. (ii) We define three considerable features for the high-beta events, concentrated on the next points: (a) there is an appreciable solar-activity influence on the high-beta events, during the maximum and middle solar-cycle phase, (b) the annual peak magnitude and the number of occurrences of high events are well correlated with the sunspot number, (c) the high-beta suprathermal plasma events present a spatial distribution in heliographic latitudes (HL) up to ∼±80°, and a specific important concentration on the low (−25° ? HL < −6°, 6° < HL ? 25°) and median (−45° ? HL < −25°, 25° < HL ? 45°) latitudes. We also reconfirm by a statistical analysis the results of Marhavilas and Sarris (2011), that the high-beta suprathermal plasma (β_ep > 1) events are characterized by a very large parameter β_ep (up to 1732.5), a great total duration (406 days) and a large percentage of the Ulysses-mission lifetime (which is equal to 6.34% of the total duration with usable measurements, and 11.3% of the duration in presence of suprathermal particles events).     

大学英语教学情境式设问应用策略初探

将情境式设问与授课内容导入交互结合的模式融入精读课堂教学,能有效提高教学效果和效率。本文以《21世纪大学英语》(读写教程第三册)Unit3,Text A,The Sense of Wonder为例,具体分析了情境式设问与课文内容导入相结合的课堂设计方案和应用策略。     

航天器总装过程特种车辆运输问题的研究

文章针对航天器总装过程所涉及的特种车辆转运问题进行研究。通过对特种车辆种类和航天器各平台总装涉及特种车辆数量分析,提出集装箱运输方案并对集装箱进行设计、实施,取得了良好效果,同时指出集装箱化运输也是航天器工装运输的趋势。     

精密复杂零件的工艺设计过程分析

针对航天控制产品精密复杂零件的工艺难点,以该类零件的工艺设计过程为主线,分别论述了材料定额编制、工艺路线设计以及工序设计过程中的注意事项和工艺方案设计方法,并以实例进行了简要说明。     

二元推力矢量喷管导流管的设计研究

针对某型飞机进行二元推力矢量改装时对发动机出口的气流进行过渡转换的问题，设计了喷管导流管，将导流管气流截面由圆形过渡到长方形。本文利用有限元软件PATRAN对导流管进行了应力强度分析和变形分析，得出导流管的应力分布场和变形位移场，通过对不同厚度的导流管的分析计算得出导流管最大应力和最大位移随管壁厚度变化曲线，从而确定最佳的管壁厚度。研究了导流管最大应力和最大位移沿轴向的变化曲线，并对导流管的结构进行了优化设计，给出两种优化设计方案，得到较为理想的结构。     

飞行器数字姿控系统数字校正滤波器参数优化设计

本文提出一种数字校正滤波器Z域最佳逼进设计算法,根据数字滤波器期望特性,在Z平面上直接优化设计滤波器参数,这种算法对任何形式的数字校正滤波器(递归式和非递归式)均是适用的。     

模柄的设计探讨

系统地介绍模柄的主要参数、技术要求、设计技巧、结构形式以及选用原则，以便于设计应用。     

Design and Application of Discrete Sliding Mode Control with RBF Network-based Switching Law

This article proposes a novel approach combining exponential-reaching-law-based equivalent control law with radial basis function (RBF) network-based switching law to strengthen the sliding mode control (SMC) tracking capacity for systems with uncertainties and disturbances. First, SMC discrete equivalent control law is designed on the basis of the nominal model of the system and the adaptive exponential reaching law, and subsequently, stability of the algorithm is analyzed. Second, RBF network is used to form the switching law in a direct and online manner with sliding-mode-related inputs and by approximating evaluation function; and the method to adjust its parameters is devised. Finally, comparable experiments are carried out to verify the application of the proposed approach to an inner-axis driven by a direct current (DC) torque motor through extra-low speed servo for a high precision flight simulator, and the axis works under deteriorating conditions such as periodically fluctuating torques of motor, nonlinear friction, and time-varying model parameters. The results show that the combined SMC can effectively improve the servo performance, for instance, to a stable 0.000 08 (°)/s speed response, the tracking error would be within 0.000 08° in 98% of operating times. Moreover, the hybrid nature of the approach imparts the RBF network the features of removing offline training and ease to set initial parameters.     

精密测试转台轴系结构设计与研究

介绍了一种高精度惯导测试转台轴系结构的特点，对轴系结构设计方法进行了研究；运用优化设计方法对影响转台质量的几个关键技术参数进行了设计，从而得出最优的设计参数。