由地面宇宙线中子强度反演空间质子和重离子的分布

采用线性回归的方法研究了太阳活动平静时期空间高能质子和重离子微分通量与地面OULU宇宙线台站中子强度之间的相关性,利用地面中子强度数据来反演空间高能质子和重离子通量.从质子和重离子的能谱出发,结合OULU台站中子强度的数据,提出了由地面中子强度数据反演空间高能质子和重离子微分通量的新方法.文中以GOES卫星上350～420 MeV,420～510 MeV,510～700 MeV,＞700 MeV(P8～P11)四能道的高能质子和ACE卫星上的元素C为例,并将反演的数据与测量结果比较,二者符合较好.为了探索这种反演方法在空间辐射环境描述中的应用,同时利用2006年11月和12月质子通量的反演结果对反演方法进行了验证,证明利用这一反演方法可以从地面中子强度的数据很好地反演出空间质子和重离子的微分通量.      

嵌入式技术在漏磁检测系统中的应用

将嵌入式技术、信号处理技术与漏磁检测技术结合起来,研制成一种适用于野外作业的便携式漏磁检测装置。由于采用了嵌入式模块,简化了电路的设计,提高了系统的整体性能。实验测试表明,该装置灵敏度及检测效率高,且成本低。在管道外侧一次扫查能检测出深度为0.2mm的缺陷,在冶金、石油化工以及城市水暖供应等工业部门中具有广阔的应用前景。     

定子磁场定向控制的异步电机无速度传感器低成本控制系统

开发了基于高性价比DSPMC56F8013的低成本异步电机控制平台,研究了一种基于定子磁场定向的异步电机无速度传感器控制算法。该算法结构简单,易于实现,对电机参数依赖性小。文中提出定子磁链校正因子,用于补偿低速运行时由于一阶低通滤波器的使用而造成的定子磁链观测误差。新颖的转速调节器,保证电机在动态过程中以最大转矩运行。系统仿真和原理样机的试验结果表明,整个控制系统具有良好的动态和稳态性能。     

Analysis of space debris impact source localization based on PVDF piezoelectric film

As the pace of human exploration and utilization of space continues to accelerate, space debris gradually becomes an inevitable problem affecting and threatening human space activities. When space debris strikes the spacecraft bulkhead, determining the impact source location timely and accurately is the foundation of the repair damage, and is also of great importance for the safety of astronauts' life. This paper analyzed the wave propagation law in thin plates, established a lightweight sensor array using PVDF (Polyvinylidene fluoride) circular thin-film sensors, and used a two-stage light-gas gun loading system to conduct hypervelocity collision localization experiments on impacting 2A12 aluminum plates to study the effects of sensor array radius and sensor size on localization results. The results show that the smaller the radius of the PVDF sensor array is, the more accurate the positioning result is under the premise of the same size of the PVDF circular film sensor array. On the premise of the same PVDF sensor array arrangement, the larger the PVDF circular membrane sensor is, the more accurate the positioning result is. ABAQUS finite element software is used to study the stress wave propagation of aluminum ball impacting aluminum plate at high speed, simulating space debris impacting spacecraft. The stress waveform obtained from the simulation is in good agreement with the experiment, which shows the accuracy of the numerical simulation method.     

Accurately predicting hypersonic transitional flow on cone via a symmetry approach

A new algebraic transition model is proposed based on a Structural Ensemble Dynamics (SED) theory of wall turbulence, for accurately predicting the hypersonic flow heat transfer on cone. The model defines the eddy viscosity in terms of a two-dimensional multi-regime distribution of a Stress Length (SL) function, and hence is named as SED-SL. This paper presents clear evidence of precise predictions of transition onset location and peak heat flux of a wide range of hypersonic Transitional Boundary Layers (TrBL) around straight cone at zero incidence, to an unprecedented accuracy as validated by over 70 measurements for varying five crucial influential factors (Mach number, temperature ratio, cone half angle, nose Reynolds number and noise level). The results demonstrate the universality of the postulated multi-regime similarity structure, in characterizing not only the spatial non-uniform distribution of the eddy viscosity in hypersonic TrBL on cone, but also the dependence of the transition onset location on the five influential factors. The latter yields a novel correlation formula for transition center Reynolds number which takes similar functional form as the SL function within the symmetry approach. It is concluded that the SED-SL model simulates TrBL around cone with uniformly high accuracy, and then points out to an optimistic alternative way to construct hypersonic transition model.     

Track detection of high-velocity resident space objects in Low Earth Orbit

The world’s economy has become heavily dependent on the services provided by satellites. With the exponential increase in satellite launches, the population of defunct or inactive hardware in space has grown substantially. This is especially true in sensitive orbits such as the Low Earth Orbit (LEO) and Geostationary Earth Orbit (GEO) regimes. These objects, collectively known as orbital debris, can reach speeds of up to 28 000km h^?1 in LEO. At these orbital speeds, even the smallest of objects can pose a considerable threat to operational satellites or astronauts. This makes the monitoring, and detection, of these objects of the utmost importance. This work describes the latest detection strategy used in one of Europe’s largest Space Situational Awareness (SSA) installation; the BIstatic RAdar for LEo Survey (BIRALES) space debris radar. We present a novel bottom-up approach that makes use of single-linkage clustering to identify faint radar streaks in spectrogram data. Tests on synthetic data have shown that the detection strategy presented in this study obtains a higher detection rate when it is compared against existing methods. Unlike other approaches, this detection strategy, using the Multi-beam streak detection strategy (MSDS) algorithm, was still able to recall 90% of the track information at an Signal-to-Noise Ratio (SNR) of 2dB.     

航天器在轨服务捕获装置技术研究综述与展望

空间捕获装置是航天器在轨服务与维护任务的重要末端执行器，承担着捕获包括航天器、舱段、空间碎片及实验样品等多种目标的任务。根据被捕获目标的性质可以将捕获装置分为合作目标捕获装置和非合作目标捕获装置2大类。在捕获装置设计过程中，捕获目标是否具有特定的抓持结构则是捕获装置机构形式设计的先导因素，根据捕获目标是否具有特定的抓持结构，可以将捕获装置分为基于抓持结构的捕获装置以及非基于抓持结构的捕获装置。以捕获装置工作原理与捕获目标类型为分类依据，对捕获装置进行分类，分别阐述了其技术原理与关键技术，并对各类捕获装置进行了对比分析，根据分析结果指出了捕获装置未来的发展方向。     

喷注方案对圆形超燃冲压发动机性能的影响研究

在飞行马赫数Ma=6，总当量比为1.0条件下，采用三维数值模拟研究了不同喷注位置煤油当量比分布对双凹腔圆形发动机推力性能和壁面热流的影响。喷注位置包括支板壁面喷注K1，隔离段出口壁面喷注K2，第一凹腔尾缘壁面喷注K3以及第一扩张段壁面喷注K4。结果表明，K1注油当量比大小直接影响燃烧室内的燃烧模态和流道中心燃烧。为了保证发动机推力性能，K1注油须达到一定量，促使流道燃烧处于亚燃模态，且流道内具有较强的中心燃烧。为优化发动机壁面热流环境，剩余燃料需要在K2，K3和K4分散注入。K2和K3注油当量比大小同时影响第一凹腔燃烧性能，其中K2注油当量比降低，推力性能下降，但壁面热流性能提高，而适当增加K3喷注煤油，有利于提高推力性能。增加K4注油，第二凹腔及其之后流道区域燃烧增强，发动机推力性能和热流性能均提高。通过分析各注油位不同当量比分布对发动机力热性能的影响规律，最终获得了力热性能较优的注油当量比分配方案，此时K1～K4注油当量比大小依次为0.6，0.1，0.1，0.2。     

Optimal planning for a multi-debris active removal mission with a partial debris capture strategy

In this paper, a new mission model, called a multi-debris active removal mission with partial debris capture strategy, is proposed. The model assumes that a platform only captures part of the scheduled debris at a time and then releases these debris pieces to a disposal orbit. This process is then repeated until all of the scheduled debris is removed. A genetic algorithm with a multiparameter concatenated coding method is designed to optimize the plan of a multi-debris active removal mission wit...     

脉冲展开式飞网质量分布与展开稳定性优化

针对脉冲展开式飞网的展开稳定性问题，从网面质量分布角度开展研究。首先基于传递矩阵方法、集中质量法和反比例函数推导建立了较优的网面质量分布模型。然后结合遗传算法优化得到了网面最优的质量分布状态，并通过大量数值仿真和回归分析得到了网面质量分布经验公式。提出的网面质量分布模型有效降低了网面质量分布问题中的优化变量个数，提升了网面质量分布最优解的求解效率。网面质量分布最优解所对应的网面展开稳定性得到大幅提升，网面质量分布经验公式对应的网面展开状态与最优解对应的网面展开状态基本一致。结果表明，将网面质量分布模型和网面质量分布经验公式应用到脉冲展开式飞网将有效提升飞网的展开稳定性。