用双激波模型计算风扇/压气机非设计点的性能

根据现代高速风扇/压气机内激波波系的真实结构,将适用于预测高速叶型激波损失的双激波模型引入基于基元叶片特性的流线曲率法程序,发展了一种用于预估高速风扇/压气机非设计点性能的方法。该双激波模型考虑了来流马赫数和攻角变化,较真实地反映了高马赫数风扇/压气机的实际工作状况,扩展预测风扇/压气机非设计点性能的能力。利用该模型,本文分别对一台叶尖马赫数达到1.4的大涵道比风扇和一台叶尖马赫数高达1.5的三级风扇的非设计点性能进行了计算,计算结果与试验结果保持了较高的吻合性。     

一种复杂系统的预测方法

提出了一种适用于复杂系统的预测方法——多因素关联预测,并以战斗机机体费用预测作为算例。     

基于热动力分析的飞机液压系统数值预测

根据传热学基本原理建立了主要液压系统元件的数学模型．运用差分法对飞机液压系统中液压油和壳体的动态传热过程进行了研究，为飞机液压系统在各种工况下的温度变化趋势进行预测提供了一种有效的工具。本对某型教练机的液压系统在地面试车及飞行中减速板收放两种工况下进行了数值预测与仿真,计算结果与实验数据吻合较好。     

网格阵列填充冷却通道内超临界正癸烷流动传热特性的数值研究

采用碳氢燃料冷却壁面是超燃冲压发动机常用主动冷却方式。为减轻主动冷却通道结构重量、提高冷却效率,本文探讨了以网格结构为填充的新型通道,从结构轻质化、流动特性及综合传热能力等方面与常规矩形主动冷却通道进行了比较。结果表明,在相同工况下,由错排网格填充的冷却通道结构综合性能最佳,其减重效果达39.93%,壁面温度显著下降,且努塞尔数最高达到光通道的2.156倍。从流动传热机理分析可看出,网格前缘冲击效应形成的马蹄涡和后缘附近发卡涡结构对强化传热贡献最大,扰动边界层和激发湍动能也是强化传热的重要因素。     

Active fault tolerant control for vertical tail damaged aircraft with dissimilar redundant actuation system

This paper proposes an active fault-tolerant control strategy for an aircraft with dissim-ilar redundant actuation system (DRAS) that has suffered from vertical tail damage. A damage degree coefficient based on the effective vertical tail area is introduced to parameterize the damaged flight dynamic model. The nonlinear relationship between the damage degree coefficient and the corresponding stability derivatives is considered. Furthermore, the performance degradation of new input channel with electro-hydrostatic actuator (EHA) is also taken into account in the dam-aged flight dynamic model. Based on the accurate damaged flight dynamic model, a composite method of linear quadratic regulator (LQR) integrating model reference adaptive control (MRAC) is proposed to reconfigure the fault-tolerant control law. The numerical simulation results validate the effectiveness of the proposed fault-tolerant control strategy with accurate flight dynamic model. The results also indicate that aircraft with DRAS has better fault-tolerant control ability than the traditional ones when the vertical tail suffers from serious damage.     

浅析检查方法的选择对维修成本的影响

维修工作贯穿于飞机的整个生命周期,产生高额的维修成本,如何降低维修成本是航空公司面临的一个重要课题。本文从检查方法和损伤容限概念的角度出发,详细阐述了在保证飞机安全的前提下,如何降低飞机维修成本。     

The Hidden Costs of Reliability and Failure in Launch Systems

In comparing the costs of different launch vehicles, the possibility of the risk of failure is assumed to be accounted for by the cost of insurance. The satellite may be insured against loss during launch, and the launch services provider may offer a free relaunch. However, actual costs of reliability and failure extend beyond this. Each failure necessitates an investigation and a get well programme by the operating agency, while putting the operations team on hold until services can resume. A commercial operator may also lose customer revenue and actual customers through loss of confidence or unavailability. Such costs tend to be hidden, and not evaluated in assessing the effectiveness of a system, but count towards total costs. Failure investigations help to improve system reliability, but this could equally have been achieved by expenditure in development and qualification. Reusable launch vehicles will have different costs associated with reliability and failure. The relationship between reliability and cost, properly assessed, ought to influence the design of both expendable and reusable launch systems.     

Z1Cr18Ni9Ti不锈钢法兰的铸造工艺研究

本文介绍了一种Z1Cr18Ni9Ti零件的制造方法，即用铸造方法。这种方法可以节省材料，提高效率，降低成本，并在此基础上探讨了有效的熔炼和铸造工艺。     

Cost Engineering – The new paradigm for space launch vehicle design

The paper describes the basic definition and application of 'Cost Engineering' which means to design a vehicle system for minimum development cost and/or for minimum operations cost. This is important now and for the future since space transportation has become primarily a commercial business in contrast to the past where it has been mainly a subject of military power and national prestige. Several examples are presented for minimum-cost space launch vehicle configurations, such as increasing vehicle size and/or the use of less efficient rocket engines in order to reduce development and operations cost. Further a cost comparison is presented on single-stage (SSTO)-vehicles vs. two-stage launchers which shows that SSTOs have lower development and operations cost although they are larger, respectively have a higher lift-off mass than two-stage vehicles with the same performance. The design of a space tourism-dedicated launch vehicle is an extreme challenge for a cost-engineered vehicle design in order to achieve cost per seat not higher than $50,000. Finally an outlook is presented on the different options for manned Earth-to-Moon transportation modes and vehicles – another most important application of 'cost engineering', taking into account the large cost of such a future venture.     

固体火箭发动机内绝热层烧蚀质量损失计算

运用较完备的烧蚀模型，采用了动边界显式差分格式，对固体火箭发动机内绝热层的烧蚀及其温度场进行了耦合计算。计算得到烧蚀率、炭化率、烧蚀厚度和炭化厚度，以及根据绝热层的工作时间计算出内绝热层的质量损失及发动机工作完成后一段时间内后效炭化质量损失。采用该方法不仅能使内绝热层设计更为合理，而且为后效推力的研究打下了基础。