基于DSP和FPGA的静电悬浮加速度计控制器设计

针对静电悬浮加速度计高稳定悬浮控制和极微小加速度信号处理需求，设计了一种基于数字信号处理（digital signal processor,DSP)和现场可编程门阵列（field programmable gate array,FPGA)的加速度计控制器。该控制器采用DSP作为主控芯片，FPGA为辅助控制芯片。基于加速度计的工作特性，设计了一种加速度计工作模式切换控制策略，可根据加速度计当前工作状态，自动或者手动切换工作模式。基于加速度计的工作原理和测量需求，设计开发了基于FPGA的比例、积分、微分(proportional integral derivative,PID)控制算法和有限冲击响应(finite impulse response,FIR)滤波算法。为验证该控制器的控制性能，开展了地面高压悬浮实验。结果表明，该控制器及控制算法可以快速准确地实现加速度计稳定悬浮控制和模式切换，并且可以实现软件在轨重构和控制参数在轨更新，为后续重力场探测、空间引力波探测以及自主导航等提供了工程参考依据。     

基于Armijo准则和BFGS算法的运载火箭控制重分配

以某型运载火箭为研究对象，研究了伺服机构故障下的重构控制问题。将该问题转化为有约束二次规划问题，采用一种Armijo准则和BFGS算法相结合的控制分配方法来求解。Armijo准则可以保证优化算法的收敛性，而BFGS算法则避免了迭代过程对Hesse阵的求逆运算，且具有收敛快的优点。将该重构方法与不动点迭代算法进行了对比，该算法经过8次迭代收敛，目标函数值和误差值分别收敛到${\mathrm{10}}^{\mathrm{2}}$量级左右和${\mathrm{10}}^{-\mathrm{5}}$量级；而不动点迭代算法经过30次迭代尚未完全收敛，目标函数值和误差分别收敛到${\mathrm{10}}^{\mathrm{3}}$量级左右和${\mathrm{10}}^{-\mathrm{2}}$量级。结果表明该重构方法比不动点迭代算法收敛快且收敛精度高。以单台发动机发生卡死故障为例对该方法进行了仿真验证，得到了与无故障情况下相同的控制效果，验证了该重构方法的有效性和正确性。      

Distributed fixed-time attitude coordinated control for multiple spacecraft with actuator saturation

This paper investigates the distributed fixed-time attitude coordinated control problem for multiple spacecraft subject to actuator saturation under the directed topology. First, a distributed fixed-time observer is presented for each follower spacecraft to estimate the leader spacecraft’s states. Compared with the commonly used fixed-time observer, the settling time of the proposed fixed-time observer can be easily adjusted by some free design parameters. Next, a distributed fixed-time control ...     

Adaptive feedback control of stability in an axial compressor with circumferential inlet distortion

The adaptive feedback control of stability with circumferential inlet distortion has been experimentally investigated in a low-speed, axial compressor. The flat-baffles with different span heights are used to simulate different distorted inflow cases. Compared with auto-correlation and root-mean-square analysis, cross-correlation analysis used to predict early stall warning does not depend on the distortion position. Hence, the cross-correlation coefficient was used to monitor the stable status of the compressor and provide the feedback signal in the active control strategy when suffering from different distortions. Based on the stall margin improvement of tip air injection obtained under different distorted inflow cases and the sensitivity analysis of cross-correlation coefficients to injected momentum ratios, tip air injection was adopted as the actuator for adaptive feedback control. The digital signal processing controller was designed and applied to achieve adaptive feedback control in distorted inflow conditions. The results show that the adaptive feedback control of air injection nearly achieves the same stall margin improvement as steady air injection under different distortion intensities with a reduced injection mass flow. Thus, the proposed adaptive feedback control method is ideal for the engine operation with circumferential distorted inflow, which frequently occurs in flight.     

Optimal trajectory design accounting for the stabilization of linear time-varying error dynamics

This study is dedicated to the development of a direct optimal control-based algorithm for trajectory optimization problems that accounts for the closed-loop stability of the trajectory tracking error dynamics already during the optimization. Consequently, the trajectory is designed such that the Linear Time-Varying(LTV) dynamic system, describing the controller’s error dynamics, is stable, while additionally the desired optimality criterion is optimized and all enforced constraints on the traje...     

动态负调约束下固体冲压发动机燃气流量控制算法研究

变流量固体冲压发动机工作过程中，常采用控制燃气发生器压强的方式调节燃气生成量，在跟踪变化压强指令过程中，流量会产生明显的负调现象，严重影响发动机系统的安全性和可靠性。为 解决这一问题，本文以具有高度非线性、强时变特性的燃气发生器系统为对象，构建了基于粒子群算法的流量调节自适应PI控制器，并给出一种利用自适应微分跟踪器对期望控制指令进行“整形”的负调改善算法；首先，结合负调发生、终止判据，综合考量系统流量安全裕度，负调发生方向，构建了适配于动态负调约束的自适应跟踪微分器（TD），克服了传统跟踪微分器在负调抑制过程中控制精度不高，指向性不强等缺陷；进一步，开展了多工况下的负调抑制算法仿真校验，结果表明：所设计自适应控制算法具备良好的燃气流量控制能力，可实现在基本不改变响应时间情况下，将最大负调量削减56.6%的控制效果，展现出良好的工程应用前景。     

运载火箭自适应制导及在线轨迹重构方法研究

结合我国运载火箭发展，梳理了传统制导方法的工程应用历程;针对故障适应性和自主化需求，分析了基于在线轨迹规划的制导方法发展概况。基于伪谱离散和凸优化理论，提出一套适应不同目标轨道的弹道轨道联合在线重构算法框架，并利用在线重构设计一种运载火箭故障导致推力不足后的自适应制导算法，通过数值实验和嵌入式测试，验证了在线重构算法和自适应制导方法的正确性、有效性。