地球静止轨道凝视型相机热分析与热设计

空间光学遥感器在轨运行过程中要承受太阳辐射和空间冷热沉、黑热沉等恶劣温度环境的影响。为确保相机在轨正常运行并拥有较高的成像品质,需要对相机进行精确的热控设计。根据地球静止轨道太阳辐射外热流特点,详细分析了静止轨道凝视相机热设计的重点和难点,并针对热设计中可能遇到的问题提出相应解决方案。     

DORIS system: The new age

The boarding of the first DGXX DORIS instrument on Jason-2 mission gives us the opportunity to present the improvements that have been implemented on the DORIS system. The goal of this paper is to present information about the new capacities of the DORIS system and to give the current status of its components. An overview of the DORIS system, the International DORIS Service and the Jason-2 satellite mission are first presented. Then the new characteristics of the on-board instrument are detailed. The capacity to track up to seven ground beacons simultaneously dramatically increases the number of measurements performed: a factor of three increase over Jason-1 is observed at the altitude of 1330 km. It also increases the diversity of directions of observation and allows low elevation measurements from 0°. The new phase measurements capability allows now phase processing. The instability of the Jason-1 USOs (Ultra-Stable Oven-controlled quartz oscillator) while crossing the South Atlantic Anomaly has been solved by decreasing the sensitivity to radiation by a factor of 10. New features of the on-board software enhance the coastal and inland water altimetry and increase the robustness of the data. The new software also improves the real time orbit accuracy for operational altimetry. The improvements introduced concurrently on the ground segment have also significantly enhanced capability. The new RINEX exchange formats provide simultaneous phase and pseudo-range measurements. The maintenance of the DORIS Beacons Network and the work done by the DORIS Signal Integrity monitoring team lead to an increased availability of the Network from 75% to 90% and so to a more homogenous orbit coverage.     

Disposal orbits for GEO spacecraft: A method for evaluating the orbit height distributions resulting from implementing IADC guidelines

Geostationary orbit (GEO) is the most commercially valuable Earth orbit. The Inter-Agency Space Debris Coordination Committee (IADC) has produced guidelines to help protect this region from space debris. The guidelines propose moving a satellite at the end of its operational life to a disposal orbit, which is designed so that satellites left there will not infringe the operational GEO region within a period of at least 100 yr.     

基于参考轨道的Walker星座相对相位保持策略

针对高轨道Walker全球星座相对相位保持问题,在分析星座几何结构演化规律基础上,提出了一种基于动态调整参考轨道的星座相对相位保持策略.该参考轨道的半长轴取星座所有卫星的平均轨道半长轴的平均值,通过计算各卫星相对参考轨道的相对相位偏差以及变化率,而后根据有关维持的约束条件来选择合适的卫星进行站点保持,使得所有卫星的相对参考轨道的相位偏差不超过允许值.当一旦有卫星进行了站点保持,则参考轨道就重新统计确定.文章通过一个12颗MEO卫星构成的Walker-δ星座的分析算例,表明这种相对保持策略可以减少星座的站点维持次数.本文提出的方法可以为我国今后卫星导航星座的维持提供参考.     

利用绳系太阳帆减缓小行星自转的技术研究

提出一种利用太阳帆绳系系统逐渐减小小行星自转速率的方法。在系绳长度不变的情况下,利用太阳帆受到的太阳光压力使其始终保持与小行星同步,避免了由于小行星自转而引起的系绳缠绕问题。通过控制太阳帆使系绳始终拉紧,系绳中的拉力便可以持续提供一个与小行星自转方向相反的力矩,从而减小其自转速率。仿真结果表明,面积10⁶ m²的太阳帆,经过约86天可将小行星的自转消除,验证了该方法的有效性。     

多GNSS掩星大气探测卫星星座设计

为减少无线电掩星(RO)大气探测星座的卫星数量并增加探测数据量,将北斗（BD）和GPS、Galileo、GLONASS共同作为探测信源,提出一种多全球导航卫星系统（GNSS）掩星大气探测星座概念和优化设计方法。融合先验大气模型和二维射线追踪算法,建立兼容多GNSS信源的掩星事件前向模拟算法,实现掩星事件快速精确仿真;给出多GNSS掩星大气探测星座参数对探测性能的影响特性,降低了星座模型的复杂度;并利用改进的蚁群算法实现星座参数寻优。设计结果与COSMICII星座相比,卫星数量减少2颗,探测数据量增加了40%,探测均匀性提高了67%。     

基于速度增量修正的卫星入轨段外测数据定轨新方法

在传统的数值积分精密定轨方法基础上,提出基于器箭分离速度增量修正的定轨方法,实现了器箭分离前后两段外测数据的联合定轨。仿真计算结果和任务实战数据验证结果表明,该方法大大提高了地月转移轨道入轨段外测定轨精度,比传统初轨确定方法提高约一个数量级。     

一种提高空间实验室定轨精度的方法

以近地航天器轨道动力学为基础,建立变阻力系数大气摄动模型,设计了求解变阻力系数的算法。然后利用天宫一号飞行器的测轨数据进行计算,分析了空间实验室飞行高度的轨道特性,其中包括：大气模式密度误差、变阻力系数与空间环境关系、定轨残差和星历误差。在空间环境平静和磁暴的条件下,制定了多种求解变阻力系数的策略,解决了空间实验室长弧段定轨精度受限的问题,并在空间环境平静条件下实现了优于10米的定轨精度,在磁暴条件下实现了优于20米的定轨精度。     

空间太阳能电站地球同步拉普拉斯轨道动力学特性

现有关于空间太阳能电站(SpaceSolarPowerStation,SSPS)轨道动力学的研究中,均将其放置于地球静止轨道（GeostationaryOrbit,GEO〖BF〗）,然而这并非最优的工作轨道。文章提出了一种优于ＧＥＯ的地球同步拉普拉斯（GeosynchronousLaplacePlane,GLP）轨道。首先,建立了轨道运动模型及影响轨道运动的摄动模型,包括地球非球形引力摄动、日月引力摄动、太阳光压力摄动及微波反冲力摄动;然后,提出了评估空间太阳能电站轨道的3个指标：接收功率、轨道适用性和安全性,并据此分析了GLP轨道相对于ＧＥＯ的优势。最后,给出了数值仿真算例。结果表明：在发电功率大致相同且满足供电需求的情况下,工作在GLP上的SSPS每年大约能节省用于轨道保持的燃料364534kg。     

DOA estimation for attitude determination on communication satellites

In order to determine an appropriate attitude of three-axis stabilized communication satellites, this paper describes a novel attitude determination method using direction of arrival （DOA） estimation of a ground signal source. It differs from optical measurement, magnetic field measurement, inertial measurement, and global positioning system （GPS） attitude determination. The proposed method is characterized by taking the ground signal source as the attitude reference and acquiring attitude information from DOA estimation. Firstly, an attitude measurement equation with DOA estimation is derived in detail. Then, the error of the measurement equation is analyzed. Finally, an attitude determination algorithm is presented using a dynamic model, the attitude measurement equation, and measurement errors. A developing low Earth orbit （LEO） satellite which tests mobile communication technology with smart antennas can be stabilized in three axes by corporately using a magnetometer, reaction wheels, and three-axis magnetorquer rods. Based on the communication satellite, simulation results demonstrate the effectiveness of the method. The method could be a backup of attitude determination to prevent a system failure on the satellite. Its precision depends on the number of snapshots and the input signal-to-noise ratio （SNR） with DOA estimation.