Neutron stars: Classification and evolution

The general aproach is considered which describs the evolution of neutron stars in terms of their interaction with surrounding matter. All possible states of neutron stars are classified from this point of view. Classification and evolution of binaries contaning neutron stars are also considered.     

巨型晶闸管在大型直流电动机拖动中的应用

巨型晶闸管在国内首次成功地用于大型风洞的动力系统──大型直流电动机拖动系统中，使大型直流拖动的控制系统简化，１０００—３０００ｋＷ系统简化到一个三相全控桥式整流电路，或两个三相全控桥式整流电路并联输出的技术问题上，而且由于系统简单化，潜在的故障因素减少，可靠性增强，维护的工作量也大大减少。本文介绍风洞动力控制系统的实用调速方法，以及用计算机控制速压的方法。     

成组技术中计算机辅助零件分类方法的探讨

成组技术是有效实现CAD/CAM的基础之一,是提高多品种、中小批量生产水平的重要手段。本文提出了在成组技术中应用模糊数学理论进行计算机辅助零件分类的新方法,并对回转零件进行了分类试验,取得了满意的结果。采用这种方法,不需要对零件进行编码,可以对零件相似性进行定量分析,使得零件分类更具有柔性,为成组技术中零件分类提供了新的方法。     

两凸平面相贯立体的隐藏线消去法

本文介绍了一种消去两相贯凸平面立体的隐藏线算法。首先利用外法线法单体消隐,然后用线与面比较法作组合消隐计算,逐一确定各个单体上可见棱线在组合体上的可见线段,最后显示或绘制所有的可见棱线段和两体的可见交线,得到消隐后的立体图。本法信息输入量较小,功能较强,不但适用于两相贯的凸平面立体的消隐,而且也适用于两迭加的凸平面立体的消隐。本程序还适用于两体具有共面的情况。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

基于Mecanum轮配送车的视觉与磁带双重导引技术研究

针对卫星总装过程中提出的物料配送需求,设计并实现了以Mecanum轮全方位移动平台为基础,可在狭窄配送通道内快速、灵活移动的智能物料配送车。结合总装现场实际环境条件,配送车采用了视觉导引与磁带导引相结合的智能导引策略,有效消除了光照强度变化、地面裂纹、电磁信号干扰等环境因素对车道线采集的影响,最终实现总装物料从库房至多工位的自动配送。     

Visual inspection of aircraft skin: Automated pixel-level defect detection by instance segmentation

Skin defect inspection is one of the most significant tasks in the conventional process of aircraft inspection. This paper proposes a vision-based method of pixel-level defect detection, which is based on the Mask Scoring R-CNN. First, an attention mechanism and a feature fusion module are introduced, to improve feature representation. Second, a new classifier head—consisting of four convolutional layers and a fully connected layer—is proposed, to reduce the influence of information around the area of the defect. Third, to evaluate the proposed method, a dataset of aircraft skin defects was constructed, containing 276 images with a resolution of 960 × 720 pixels. Experimental results show that the proposed classifier head improves the detection and segmentation accuracy, for aircraft skin defect inspection, more effectively than the attention mechanism and feature fusion module. Compared with the Mask R-CNN and Mask Scoring R-CNN, the proposed method increased the segmentation precision by approximately 21% and 19.59%, respectively. These results demonstrate that the proposed method performs favorably against the other two methods of pixel-level aircraft skin defect detection.     

燃气轮机多微机监控系统通讯协议的制订与实现

对舰用燃气轮机组的多微机实时控制系统提出了多微机实时控制通讯协议。该协议为面向字符的数据链路层协议,能实现全双工通讯。通讯全部采用中断方式,为保证各通信互不干扰可靠畅通进行,该协议对通信管理设计为四大模块：通信数据组织模块、通信启动发送模块、通信中断模块和通信Watchdog模块。以监测机为例,根据监测机在通信中的地位,将通讯分为监测机主动发送方式、主动接收方式、被动发送方式和被动接收方式,并对各种方式下的通信过程进行了详细的论述。     

地下原油无缆电加热系统可靠性措施的计算机仿真与优化决策

本文根据给定的油井地质资料,用计算机对其进行拟合再现,着重讨论了井下原油无缆电加热系统的可靠性措施及其计算机仿真与优化决策方法。     

结构光三维视觉系统研究

介绍了结构光三维视觉原理,在广义坐标系中采用投影和透视变换理论建立了结构光三维视觉模型。在此基础上,提出了基于非线性最小二乘法的模型参数标定方法,并建立了结构光三维视觉系统,给出了实验结果。