U（sl（2,F）（＋））的生成元及生成关系

设sl（2，F）是三维单代数，sl（2,F）是相应于sl（2，F）的无扭仿型Kac-Moody代数的导代数。讨论了sl（2,F）的子代数sl（2,F）（＋）的普遍包络代数U（sl（2,F）（＋））的生成元及生成关系问题。     

Swsy-A型双压法湿度发生器的研制

介绍了适用于湿度校准实验室和现场使用的Swsy-A型双压法湿度发生器，阐述了其工作原理，并给出了技术指标、性能、试验结果和分析结论。     

凸轮逆序测量方法

目前各杂志所发表的关于凸轮测量的文章，所讨论的均是凸轮的顺序测量方法，有关凸轮的逆序测量(反求工程)方法，尚未见于文字。本文将对凸轮的逆序测量方法进行探讨。     

算术平均序列的收敛性

下述命题是熟知的:假设 {x_n)_(n=1)~∞是一数列且x_n=a 则1/n x_=a,并且我们知道它的逆命题是不真的。本文给出两个定理和两个推论,定理1断言S_n=1/nx_i 收敛于 a 和 b 的某种组合,这里 a 是(x_n)的子列极限,b 亦如此。在定理2中我们给出1/nx_i=0的一个充要条件,两个推论也是有趣的。     

Energy principle and material removal sequence optimization method in machining of aircraft monolithic parts

In the machining process of aircraft monolithic parts, the initial residual stress redistribution and structural stiffness evolution often lead to unexpected distortions. On the other hand, the stress redistribution and stiffness reduction during the machining process depend on the material removal sequence. The essence of the stress redistribution is releasing the initial elastic strain energy. In the present study, the influence of the material removal sequence on the energy release is studied. Moreover, a novel optimization method is proposed for the material removal sequence. In order to evaluate the performance of the proposed method, the mechanism of the machining distortion is firstly analyzed based on the energy principle. Then a calculative model for the machining distortion of long beam parts is established accordingly. Moreover, an energy parameter related to the bending distortion and the procedure of the material removal sequence optimization is defined. Finally, the bending distortion analysis and material removal sequence optimization are performed on a long beam with a Z-shaped cross-section. Furthermore, simulation and experiments are carried out. The obtained results indicate that the optimized sequence results in a low distortion fluctuation and decreases the bending distortion.     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.     

基于故障字典的旋转整流器故障检测方法

以交流电为主要电源的飞机普遍采用无刷交流发电机作为发电装置,但由于半导体器件抗干扰、抗过载能力差,旋转整流器成为故障发生率较高的部件,文中介绍了利用快速傅里叶变换（FFT）通过对励磁电流的分析来检测可能出现的故障,并利用故障字典快速地判断出故障原因。     

发烟机动力装置的试验研究

简要介绍了发烟机及其动力装置,研究并改进了ＷＱＪ－１型小型航空发动机,使之成为满足发烟要求的动力装置。确定了该发动机在新状态下的参数及结构,进行了发烟机的雾油发烟实验,得到了雾油发烟对发动机的影响及影响程度。实验结果表明：将ＷＱＪ－１型小发动机改为发烟机动力装置是可行的。对发烟机的型号研制和扩展小型航空发动机的使用范围有积极促进作用。     

图像序列中机动目标三维运动和结构的计算

综合视觉运动分析中的2类处理方法,选取图像中的角点作为特征点,在理论上证明了图像序列的光流场可以近似地用角点的位移场代替。利用已有文献中的建模思想,详细推导出递归计算机动目标三维运动和结构的非线性计算模型,采用广义卡尔曼滤波(EKF)递归地计算图像序列中机动目标的三维运动和结构。合成图像序列和真实图像序列实验结果表明该算法能取得较好的效果。     

太赫兹脉冲计量技术

太赫兹(以下简称THz)波位于微波到红外光学的过渡区域,具有重要的学术价值,在民用和国防等领域有着广泛的应用。高速器件产生或传输的超快脉冲宽度已达皮秒量级,带宽已进入太赫兹频段。传统技术和方法无法解决此类器件的校准问题,而结合光电技术的时域电光取样(EOS)技术则为太赫兹脉冲计量提供了有效的手段,本文对此类新技术进行了全面的概述。