On the evidential reasoning rule for dependent evidence combination

Evidential Reasoning (ER) rule, which can combine multiple pieces of independent evidence conjunctively, is widely applied in multiple attribute decision analysis. However, the assumption of independence among evidence is often not satisfied, resulting in ER rule inapplicable. In this paper, an Evidential Reasoning rule for Dependent Evidence combination (ERr-DE) is developed. Firstly, the aggregation sequence of multiple pieces of evidence is determined according to evidence reliability. On this basis, a calculation method of evidence Relative Total Dependence Coefficient (RTDC) is proposed using the distance correlation method. Secondly, as a discounting factor, RTDC is introduced into the ER rule framework, and the ERr-DE model is formulated. The aggregation process of two pieces of dependent evidence by ERr-DE is investigated, which is then generalized to aggregate multiple pieces of non-independent evidence. Thirdly, sensitivity analysis is carried out to investigate the relationship between the model output and the RTDC. The properties of sensitivity coefficient are explored and mathematically proofed. The conjunctive probabilistic reasoning process of ERr-DE and the properties of sensitivity coefficient are verified by two numerical examples respectively. Finally, the practical application of the ERr-DE is validated by a case study on the performance assessment of satellite turntable system.     

变推力液体火箭发动机推力调节技术研究综述及发展趋势

系统梳理了国内外变推力液体火箭发动机调节控制技术的研究历程及研究现状，并结合我国航天动力研究基础，指出通过在主系统或副系统管路上设置液体或燃气流量调节装置、通过可调结构的针栓式喷注器同步对流量与压力进行匹配调节仍然是实现大范围变推力调节的两种主要手段；分析了变推力液体火箭发动机推力调节的关键技术及其解决途径，预测了未来一段时期内变推力液体火箭发动机及其调节技术发展趋势，提出了若干适合我国国情的研究建议，为我国低成本、可重复使用天地往返运输技术的发展和有关研究者开展研究工作提供一定的参考。     

遥感卫星多路数据传输系统同频共用方法

为节省频率资源，遥感卫星通常采用扩频体制实现多路数据的同频共用传输，针对通道间容易引起相互干扰的问题进行了研究，通过改进码分多址干扰估算模型，对采用平衡Gold码序列扩频系统抗干扰容限上界进行预测。在满足国际电信联盟（ITU）对卫星辐射功率通量密度约束条件下，提出了一种基于直接序列扩频体制的两路业务数据同频共用传输方法。仿真结果表明：当载波频率2GHz左右，两路辐射源的EIRP之差不大于8～15dBw时可以实现同频共用传输；如对信号扩频带宽进行差异化处理，则其相互兼容性还可进一步提高。     

往复节流式正脉冲发生器性能分析CSCD

在石油开采与钻探领域,脉冲发生器作为旋转导向系统井下信号传输系统的重要组成部分,提高压力脉冲幅值有助于提升旋转导向系列产品的市场竞争力。为了揭示其工作原理及提高压力脉冲幅值,基于计算流体动力学,利用用户自定义函数(UDF)、动网格技术、非牛顿流体模型,借助Fluent平台对往复节流式正脉冲发生器进行了动态数值实验。利用离散形式的动量方程将主阀体与电磁阀的被动运动转变为主动运动,选择适用于k-ε湍流模型的赫-巴非牛顿流体本构方程描述泥浆,提高了计算的收敛性与运动的可控性。基于非牛顿流体的流固耦合方法,更真实地模拟了脉冲器在井下工作过程。结果表明限流环内径越小或入口排量越大,则压力脉冲幅值与信号发生频率越大。     

动态负调约束下固体冲压发动机燃气流量控制算法研究

变流量固体冲压发动机工作过程中，常采用控制燃气发生器压强的方式调节燃气生成量，在跟踪变化压强指令过程中，流量会产生明显的负调现象，严重影响发动机系统的安全性和可靠性。为 解决这一问题，本文以具有高度非线性、强时变特性的燃气发生器系统为对象，构建了基于粒子群算法的流量调节自适应PI控制器，并给出一种利用自适应微分跟踪器对期望控制指令进行“整形”的负调改善算法；首先，结合负调发生、终止判据，综合考量系统流量安全裕度，负调发生方向，构建了适配于动态负调约束的自适应跟踪微分器（TD），克服了传统跟踪微分器在负调抑制过程中控制精度不高，指向性不强等缺陷；进一步，开展了多工况下的负调抑制算法仿真校验，结果表明：所设计自适应控制算法具备良好的燃气流量控制能力，可实现在基本不改变响应时间情况下，将最大负调量削减56.6%的控制效果，展现出良好的工程应用前景。     

Design and analysis of a novel hybrid cooling method of high-speed high-power permanent magnet assisted synchronous reluctance starter/generator in aviation applications

To improve the heat dissipation performance, this paper proposes a novel hybrid cooling method for high-speed high-power Permanent Magnet assisted Synchronous Reluctance Starter/Generator (PMaSynR S/G) in aerospace applications. The hybrid cooling structure with oil circulation in the housing, oil spray at winding ends and rotor end surface is firstly proposed for the PMaSynR S/G. Then the accurate loss calculation of the PMaSynR S/G is proposed, which includes air gap friction loss under oil spray cooling, copper loss, stator and rotor core loss, permanent magnet eddy current loss and bearing loss. The parameter sensitivity analysis of the hybrid cooling structure is proposed, while the equivalent thermal network model of the PMaSynR S/G is established considering the uneven spraying at the winding ends. Finally, the effectiveness of the proposed hybrid cooling method is demonstrated on a 40 kW/24000 r/min PMaSynR S/G experimental platform.     

Optimized design of high-efficiency lunar soil sampling tube structure based on stress–strain law

Understanding the influence of the sampling apparatus on in-situ lunar soil lamination information during the sampling process of the direct push-through lunar weathering layer is of great importance. This paper develops a discrete element model for direct push-through lunar weathering layer sampling using the CUG-1A simulated lunar soil developed by the China University of Geosciences as a simulation object and determines the stress–strain law of the inner wall of a sampling tube. A method for optimizing the inner wall structure of a sampling tube based on the stress–strain law is proposed. The structural disturbance of the marker layer and the lunar soil disturbance rate evaluation function are used to assess the degree of disturbance of the laminar information during the sampling process. The results show that the proposed method can effectively reduce the structural disturbance of the lunar soil in-situ laminar information. In addition, it can also optimize the structural information disturbance of the marker layer. The proposed method can decrease the simulated lunar soil disturbance rate from 0.31 to 0.251 and effectively reduce the penetration force load by 15–20% in the direct push-through sampling process.     

基于模态发生器的进气道风扇噪声及声衬降噪实验

为研究发动机进气道风扇噪声特性及声衬降噪效果,使用模态发生器提供声源,采用固定麦克风阵列和旋转扫描耙装置测量进气道内噪声信号,进而利用周向和径向模态分解方法得到声模态幅值,对影响模态分解结果的关键因素进行了研究.对周向模态在时域内进行分解,得到幅值和相位的时变特性.最后完成了2套声衬实验件降噪效果测试.结果表明:模态发...     

面向无人集群的通信定位一体化方法研究

针对无人集群协同作战通信/定位的集约化设计需求，提出了一种单载波频域均衡（SCFDE）与直接序列扩频（DSSS）技术有机结合的通信定位一体化波形。一方面，利用SCFDE中频域均衡易于克服频率选择性衰落且便于与DSSS结合的优势，使系统具有良好的适应复杂场景的通信能力；另一方面，利用恒包络零自相关导频序列的优良自相关和互相关特性，将其作为导频序列并计算与本地导频符号的循环移位相关，检测相关峰值即可实现整数符号周期信号到达时间估计。同时，结合用于信道估计的导频序列，构建差分延时相关模型，有效解决了小数采样周期信号到达时间估计问题，实现了高精度的信号到达时间估计。     

烟草丛顶病毒ORF3的克隆及原核表达

利用RT-PCR方法,自烟草丛顶病毒(Tobacco bush top virus,TBTV)龙陵分离物(TBTV-YLLi)的RNA中扩增出ORF3目的片段,并克隆到pMD18-T载体上进行序列分析.结果表明,TBTV-YLLi的ORF3全长714 bp,与TBTV其他分离物的核苷酸相似性和氨基酸相似性分别为98.3%～98.6%和95.4%～95.8%;与同属的花生丛簇病毒(Groundnut rosette virus,GRV)、豌豆耳突花叶病毒2号(Pea enation mosaic virus-2,PEMV-2)和胡萝卜拟斑驳病毒(Carrot mottle mimic virus,CMoMV)的核苷酸相似性分别为65.1%、61.6%和49.7%,氨基酸相似性分别为36.4%、34.6%和16.5%.将ORF3克隆到原核表达载体pET28a(+)上,获得的重组子pET28-ORF3转化大肠杆菌BL21-plysS,使用终浓度为1.0 mmol/L 的IPTG在37 ℃诱导培养4 h时,该融合蛋白表达量最高.融合蛋白经Ni~(2+)亲和柱层析纯化后,SDS-PAGE 电泳表明,融合蛋白相对分子质量约为35 000,与预计的相对分子质量大小相一致.