燃气二次喷射推力矢量控制系统启动过程非定常效应研究

采用数值模拟方法对燃气二次喷射推力矢量控制系统启动过程中非定常效应进行了研究.给出了详细的喷流瞬态干扰流场结构, 以及喷流瞬态干扰区随时间改变的流场细节特性,分析了流动参数和发动机内弹道性能的动态变化过程.研究表明,主/次流干扰流场内流动参数的分布及变化呈现复杂的多样性,启动过程中所呈现出的动态特性与系统稳定工作时有着明显的差异,侧向控制力、燃烧室平衡压强和发动机推力均有显著变化.在飞行器设计中,必须从安全控制的角度出发,考虑这一非定常效应的影响.     

某型先进发动机燃油喷嘴雾化特性的试验研究及火焰筒头部数值模拟

使用相位多普勒粒子分析仪和激光多普勒粒子测速仪系统(PDPA/LDV)等设备测量了某型航空发动机喷嘴的雾化特性,主要包括:喷嘴流量特性,雾化粒度(SMD)和喷雾锥角。应用Fluent软件,对装用该喷嘴的燃烧室火焰筒进行了数值模拟。试验和计算结果得出了一些有价值的结论,对该发动机的燃油喷嘴和火焰筒头部温度场、速度场有深入了解,对其改进提供了重要依据。     

一种涡轮发动机加速控制规律设计的新方法

 提出了一种涡喷、涡扇发动机加速控制规律快速设计的新方法：在发动机稳态特性计算模型的基础上,通过额外增加转子提取功率,使得发动机稳态工作点（线）靠近喘振边界,在同时考虑燃烧室富油熄火边界、涡轮进口总温限制以及压气机喘振裕度限制的条件下,利用适当的控制规律描述形式并结合发动机工程研制中的经验,能够快速而准确地获得涡喷、涡扇发动机加速控制规律。对某型涡喷发动机加速控制规律的改进的计算结果表明,提出的加速控制规律的设计方法准确而有效。     

小展弦比飞翼布局作战飞机垂直面机动性研究

比较分析了某小展弦比飞翼布局作战飞机与典型的常规布局战斗机F16在亚、跨、超声速范围的气动特性,相对而言,飞翼布局飞机具有较大的升阻比和较低的翼载荷.计算并分析了该飞翼布局作战飞机与F16在垂直机动面内的平飞加速性能和跃升性能,得到了由于布局和气动特性不同引起的飞翼布局作战飞机机动性的新特点.研究结果对飞翼布局作战飞机的设计和作战使用均具有一定的参考意义.     

点火瞬态过程仿真模型参数辨识

建立了固体火箭发动机点火瞬态过程一维非定常流场仿真模型,采用系统辨识方法进行了模型参数不确定性研究。基于点火试验用缩比发动机试验结果,得到了传热模型参数和瞬态燃速模型参数的最优估计,提高了点火瞬态过程一维仿真模型的预估精度。采用近似方法,构建Kriging近似函数,有效解决了一维非定常流场仿真的计算复杂性问题。     

结冰对民用飞机飞行性能的影响分析

在获取民用飞机适航合格审定证明前,必须通过飞行试验,并在试验中演示验证民用飞机能在CCAR25部附录C确定的连续和间断的最大结冰状态下安全运行。基于此背景,计算并得到某型机两种构型在45min待机冰型下的飞行性能,与无冰状态下对应构型的飞行性能进行对比分析。结果表明,结冰对飞机的飞行性能具有较大的影响。     

一种基于冗余测量的自适应卡尔曼滤波算法

针对目前自适应滤波算法的不足,在测量系统量测噪声方差未知的情况下,设计了一种基于冗余测量的自适应卡尔曼滤波(RMAKF)算法。通过对系统冗余测量值的一阶、二阶差分序列进行有效的统计分析,可以准确估计系统量测噪声统计特性,进而在滤波过程中自适应调节噪声方差阵R,提高滤波精度。以全球定位系统/惯性导航系统(GPS/INS)松组合导航系统为对象进行了仿真实验,结果表明该算法在测量系统噪声特性未知或发生改变时,可对其进行准确估计,在采用低精度惯性器件情况下,滤波结果较其他主要自适应卡尔曼滤波算法有较明显的改进。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

某型国产发动机压力传感器故障分析

从某型国产涡轴发动机压力传感器基本组成和工作原理出发,针对故障现象和特点,开展故障原因分析,得出了相应的结论,并提出了改进的合理建议,有利于提高发动机的可靠性。