超声速巡航发动机设计点参数选择

针对高性能军用发动机实现不加力超声速巡航所需要高推力性能的要求，并兼顾经济性、提出了发动机设计点热力参数的优化选择方案，并利用建立的发动机仿真程序，对某型发动机进行了计算，对提出的方案进行了验证。     

大迎角细长体头涡结构演变的非定常现象研究

细长旋成体绕流中位于尖部附近的一对头涡在迎角增至一定程度时,会表现出很强的非定常特征,而此时后体上为类卡门涡脱落区域。为了寻找这对头涡的非定常特征随迎角变化的规律,在两个风洞中分别用两个细长体模型进行测压和流动显示实验,得到了在很大迎角下旋成体头涡的脉动频率随迎角基本呈线性变化的规律,而后体上的卡门涡脱落频率则与迎角的正弦值成正比。     

细长旋成体大迎角绕流中的头涡与卡门涡的脉动压力特性

在迎角很大时细长旋成体背部流场沿轴向通常有两个截然不同的区域,其中卡门涡脱落区域位于后体,而头涡区域靠近旋成体头部。为了寻求两者的区别与联系,在两个风洞中分别用两个细长体模型进行测压和流动显示实验,得到了沿旋成体轴向不同区域的压力脉动特征,即头涡的脉动幅度相对卡门涡较大,而频谱峰频率则较低,而且随着迎角的进一步增大,头涡区会完全消失。     

求解大型对称特征值问题的迭代Chebyshev-Lanczos方法

本文研究计算大型对称矩阵极端(几个最大或最小)特征值及相应特征向量的问题,讨论了Chebyshev迭代法对Lanczos方法的应用,提出了Chebyshev-Lanczos方法。计算实践表明迭代Chebyshev-Lanczos方法比迭代Lanczos方法优越。     

一类变结构控制系统滑动模态的特征值条件

在单输入双线性常值变结构控制和比例变结构控制及一般双线性常值变结构控制系统的基础上，将系统推广到一般多输入双线性系统的比例变结构控制，引入排序截尾算子取变结构控制律与状态变量中ｍ个绝对值较大的分量成比例实现对ｎ个被控变量的控制，采用李亚普诺夫方法研究这类系统的滑动模态，得出此类系统产生稳定滑模运动的条件，并对该条件进行讨论和简化，将其表述成系统矩阵与双线性矩阵特征值之间的关系式。同时给出了一个三阶     

飞机液压能源管路系统的振动特性分析

论述了液压能源管路网络系统的建模，着重建立了液体输管路及有关元件的传递矩阵，并给出了如何用特性阻抗法对系统进行求解，最后对飞机液压能源管路系统的动态特性进行了仿真，并指出了一些重要的影响因素。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

Experimental study on plasma jet deflection and energy extraction with MHD control

This paper presents an integrated research scheme for vector deflection and energy extraction in a gas plasma jet under Magneto-Hydrodynamic (MHD) control. A MHD-controlled thrust-vector test rig was used to conduct the experimental research. A gas plasma was obtained by injecting ionization seeds of Cs₂CO₃ into the combustion chamber via artificially forced ionization. The effects of the gas temperature and ionization seed mass fraction on the plasma jet deflection and energy extraction were experimentally verified under an applied magnetic field. The experimental results were analyzed theoretically. The results showed that the deflection amplitude of the gas plasma jet and the extracted voltage signal intensity increased with increasing gas temperature and the ionization seed mass fraction. The extracted dynamic voltage signals proved that the ionization seeds of Cs₂CO₃ induced gas ionization at 1173 K. The experiment verified that it is feasible to simultaneously achieve jet deflection and extract energy under the action of an external magnetic field.     

基于中介理论与交通特性的终端区态势评价

终端区交通态势的准确度量是制定并实施流量管理措施的重要依据之一。通过提取终端区宏观与微观的交通特性,从进离场及总量3个维度构建态势的指标描述,并进一步采用中介理论中的真值程度度量与熵权法建立了一种客观的终端区飞行区交通态势模糊综合评价方法,实现客观、准确的交通态势判别与样本间量化比较。选取国内典型繁忙终端区的实测数据,验证了评价方法与特性指标的有效性。     

不同钝体宽度下的驻涡燃烧室排放试验

为了研究空气流量分配对驻涡燃烧室对排放特性的影响,了解对驻涡燃烧室内污染物生成的过程及其影响因素,设计了一个能够改变中心钝体宽度、仅凹腔供油的驻涡燃烧室.在常压下对该驻涡燃烧室进行了排放特性试验,进口温度保持200℃.试验中,燃烧室进口马赫数为0.15~0.3.影响排放的因素主要包括雾化质量、凹腔当量比以及与进口马赫数相关的驻留时间等.总体来说雾化质量、凹腔当量比的提高对降低CO和HC的排放是有利的,但是这会使NOx排放增加.在低凹腔当量比时,CO排放曲线变化下降比较平缓,甚至出现上升趋势,而HC排放曲线比较陡峭.这是由于HC的消耗速度比CO消耗速度快,随着凹腔当量比的增加,供油压力提高,燃油雾化粒径变小,燃油蒸发时间缩短,使HC排放快速减少,中间产物CO大量产生而来不及消耗.凹腔当量比进一步上升时,由于燃烧温度的提高,使得CO排放快速减少.在燃烧室内燃烧过程中,NOx的形成和消耗是非常复杂的过程,目前只能作一些定性的分析,而CO和HC的反应过程相对简单.通过对不同钝体槽宽下,具有相似凹腔前壁流量的工况的比较,发现CO和HC的形成主要受凹腔内工作状况影响,而NOx的形成过程更复杂,主流也对其产生着重要的影响.