CLVD 法制备C/C复合材料工艺探索研究

研究了采用化学液气相沉积法制备C／C复合材料的工艺过程，分析了不同预制件、温度、浸泡时间等工艺参数对致密速度、效果的影响，并总结出了一套快速高效的致密方法。     

老龄飞机复合材料维修策略初探

老龄飞机复合材料损伤具有普遍性、重复性、严重性、隐蔽性和可预见性等特点。有针对性的维修策略,包括改进检查手段,增加检查对象,提倡主动性预防维修,提高维修质量标准等,对保障老龄飞机安全具有重要意义。     

PP／SCF复合材料的制备和力学性能的研究

本文制备了聚丙烯（PP）／,短炭纤维（SCF）复合材料并研究了其力学性能。结果表明,复合材料的拉伸强度随SCF含量的增加有先增加后趋于稳定的趋势,当SCF含量达到6％时,拉伸强度达到极值。随着SCF的加入,冲击强度呈先增加后略有降低的趋势,复合材料在SCF含量为6％时冲击强度达到极值。由此可知,适量的加入SCF对PP起到了较好的增强增韧效果。     

浅析俄罗斯战斗机CY—37“金雕”前掠翼三翼面气动布局的先进性

本文追溯了前掠翼的飞机的渊源。指出常规二翼面的后掠翼，变后翼和近矩耦合鸭式气动布局存在着妨碍机动进一步提高的缺点。     

一种先进复合材料件无损检测的探讨

一种先进复合材料受力件的制品,如何检测内部是否有分层脱胶,曾遇到很大的困难。本文阐述如何结合实际解决这一难题,从而免受重大损失。     

化学气相沉积/渗透技术综述

综述了化学气相沉积技术的最新发展，包括金属有机化合物化学气相沉积，等离子辅助化学气相沉积，激光化学气相沉积；同时介绍了三种用于制备工程材料的快速致密化化学气相渗透技术，包括强迫流动热梯度化学气相渗透，化学液相沉积，感应加热热梯度快速致密化技术。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

酚醛树脂炭的合成及力学性能研究

为了表征多孔炭泡沫材料基体的结构与力学性能,采用碱催化法制备热固性酚醛树脂,经固化、高温炭化处理合成多孔炭泡沫材料的基体——酚醛树脂炭。研究酚醛树脂炭的微观结构、压缩强度及压缩断裂韧性。结果表明:酚醛树脂炭结构以树脂炭基体、微孔和微裂纹为主,其碳元素以sp3杂化的非晶炭形式存在;压缩强度为8.58 MPa,压缩断裂特征为脆性断裂模式;酚醛树脂炭的压缩断裂韧性较差,断裂过程中吸收的总能量为0.135 MJ/m3。     

改进层次聚类法在复合材料敲击检测中的应用

伴随复合材料的迅速发展,其在航空航天方面的应用也日益普遍,但因复合材料的各向异性,在制造过程中会导致某些缺陷的产生。敲击检测作为一种实时原位的无损检测,在复合材料的检测中效果明显。由于敲击检测尚未找到合理的数据处理方法,所以其应用范围受到限制。从解决敲击检测数据处理方法的角度出发,提出将改进层次聚类法应用于敲击检测中,并在应用实例环节对该方法进行了应用,通过实验结果对比,表明改进层次聚类方法可以解决敲击检测数据处理的问题。     

Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.