某刹车装置的活塞组件衬套裂纹机理探究

某刹车装置耐久性试验中,活塞组件的衬套出现疲劳裂纹,经分析是由于汽缸座和刹车壳体外翘,活塞在与刹车盘间的摩擦力作用下对衬套外端产生交变挤压所致,试验验证结果成立,证明产品刚性影响构件的疲劳寿命。     

直升机操纵系统操作试验研究

本文提出的操纵系统操作试验是以直升机在恶劣飞行条件下、且在操纵系统助力器失效时,判断直升机操纵系统本身有无过度变形、过度摩擦和卡阻现象发生以确保直升机在恶劣气象条件下的安全飞行。此试验是在某型直升机上严格按适航条例规定,在动平衡加载状态下全行程范围内往返运动进行测试研究的。     

等截面通道角形挤压对高纯铝微观组织及力学性能的影响

采用等截面通道角形挤压技术对高纯铝进行室温大塑性变形 ,通过不同角度模具沿路径 A组合挤压 ,实现了高纯铝的晶粒细化 ,晶粒尺寸可达 0 .6 μm以下 ,且硬度和屈服强度显著增加。微观组织分析表明 :不同角度模具组合挤压可以得到不同的剪切平面组合 ,使得相邻两次挤压剪切平面的夹角为 75°,从而使得高纯铝在相对较小的塑性变形情况下得到超细晶粒结构 ,证明等截面通道角形挤压方法中剪切平面对晶粒细化效果的影响是非常大的     

夹芯的典型参数对夹层板受迫振动影响分析

根据伽辽金法,用Matlab/Simulink软件对推导的经典板假设理论、一阶剪切理论蜂窝夹层板运动方程进行了数值仿真。简单算例的计算结果表明两者基本一致。基于一阶剪切理论讨论了蜂窝夹芯泊松比对蜂窝夹层板低阶频率的影响。发现当泊松比接近1时对频率响应有显著的影响。     

冲压发动机燃烧室壳体静热试验局部失稳变形分析

对静热试验中某发动机燃烧室壳体的局部失稳变形的试验现象进行了描述,为探究其失稳变形产生的机理,对试验测得的温度数据和应力数据进行了分析,并对静热联合作用下的应力分布进行了有限元的计算,找到了引起静热联合试验中燃烧室壳体产生局部失稳变形的主要原因,并给出了解决该类问题的几点建议。     

风力机柔性叶片振动变形对其气动阻尼的影响分析

为了研究大型水平轴风力机柔性叶片的振动变形对其气动阻尼的影响,用叶素动量理论计算了风力机叶片气动力,用有限元法计算了结构动力响应,基于能量损失法建立了风力机的气动阻尼分析模型.重点分析了叶片振动扭角、挥舞倾角、摆振倾角对攻角的影响,考虑了挥舞速度,摆振速度对入流速度、入流角的影响.以某5MW海上风力机为例,分析计算了风力机整个叶片的气动阻尼.结果表明挥舞倾角、扭角对挥舞方向气动阻尼影响较大,会使其减小;摆振倾角对摆振方向气动阻尼的影响较大,会使其增大;振动变形对气动阻尼沿叶片的分布没有影响.     

新型可调引射器焊接变形控制及利用方法

为了保证可调引射器运动机构的灵活性,根据其结构特点,采用胀胎结合胀块的定位方法减小筒体变形,合理布局连杆座和耳座位置以利用焊接残余变形,在胀块上安装与连杆座相应的垫块,减小由焊接连杆座引起的凹陷变形,保证了组合件的顺利安装;同时根据同步环摆动的特点,确定同步环灵活摆动的角向位置,有效地满足了可调引射器的机构运动要求.试验结果表明:可调引射器调节片工作时能够保证打开和关闭2个位置的稳固,未发生构件失效等问题,其可靠性初步满足装机要求.     

薄壁碗状壳渐进成型技术的应用

薄壁零件如汽车覆盖件、机翼、导弹壳体、燃料储箱等在汽车、航空、航天、船舶、家电、机械等行业有着广泛的应用。本文通过对某产品薄壁纯铝碗状壳渐进成型制造工艺的综合分析,阐述了在薄壁回转体零件的加工中,如何通过选择不同的制造工艺,采用“分层制造”思想,将复杂的三维数字模型沿高度方向分解成一系列等高线层,从而实现对产品的渐进塑性成型加工,希望此文对同类型的产品的制造有所借鉴。     

Present-day crustal movement of the Chinese mainland based on Global Navigation Satellite System data from 1998 to 2018

A total of more than 260 continuous stations and 2000 campaign stations from the Crustal Movement Observation Network of China (CMONOC) project, covering the Chinese mainland and its surrounding areas during the period of 1998–2018, are processed using the Bernese Global Navigation Satellite System (GNSS) software via a state-of-the-art method. We obtain the coordinate time series of all the stations given in the reference frame ITRF2014, estimate the coseismic deformation, and remove outliers. Lastly, we present the latest, most complete, and most accurate contemporary horizontal velocity field with respect to the stable Eurasian plate, irrespective of the postseismic deformations. This study shows that the signal of tectonic movement in Western China is stronger than that in Eastern China particularly in the Tibetan Plateau, with a rate of 18–32?mm/a. Moreover, the signal decays sharply from south to north. However, North China and South China move coherently to the ESE direction mostly at a rate of 4–10?mm/a and have not experienced any abrupt velocity gradients in their interiors. Meanwhile, Northeast China has the lowest velocity of only 2–4?mm/a in addition to the coastal areas that have slightly larger velocities. The densified and continuous observation of GNSS stations are of great significance to the study of the present-day crustal movement and tectonic deformation characteristics of the Chinese mainland. This would help to provide better constraints on the kinematics and dynamics of the region.     

Evaluation of thermal effects on temperature-sensitive operating force of flow servo valve for fuel metering unit

The temperature-induced variation in operating force of flow control valves may result in performance degradation or even jam faults of fuel metering unit (FMU), which significantly affects the safety of aircrafts. In this work, an analytical modeling approach of temperature-sensitive operating-force of servo valve is proposed to investigate the temperature characteristics in varying temperature conditions. Considering the temperature effects, a new extended model of flow force is built and an analytical model of valve friction is also derived theoretically based on the dynamic clearance induced by thermal effects. The extremum condition of friction is obtained to analyze the characteristic-temperature points where jam faults occur easily. The numerical results show that flow force increases firstly and then decreases as temperature increases under a constant valve opening. The maximum friction of flow servo valve can be uniquely determined when the structural parameters and ambient temperature are given. The worst situation just happens at the characteristic-temperature points, which are linearly related to the axial temperature gradients of valve spool. Such evaluations may give an explanation for the temperature-induced jam faults of vulnerable valves and provide a reference for designers to determine a suitable working-temperature range of valves in practice.