电机变频控制实现换热器节能的应用研究

结合寒冷地区气候特点与通信机房温控的现状,针对50%浓度乙二醇溶液为工质的换热器,试验研究了自然冷源利用率与换热器自身变频节能的关系。结合乙二醇冷剂的特性,通过建立功率与频率关系模型、温差与功率和频率关系模型,实现了换热器循环泵和风机的变频控制策略。结果表明:在室内外温差、换热功率与循环泵、风机频率同时满足的条件下,以功率模型作为参数进行换热器自身的变频节能是可行的。通过对哈尔滨地区的气候数据与散热房控温试验分析,证明了乙二醇换热器的变频节能效果。     

日照边缘区域电离层对耀斑的响应特点研究

利用MSIS模型和背景太阳辐射谱模型,在一定大耀斑辐射谱假设的前提下,计算了耀斑期间日照边缘区域的电子产生率,分析了这一区域电离层电子密度的变化特点.结果表明,大耀斑期间在日照边缘区域,甚至大于太阳天顶角90°的区域都有明显的电子产生率的增加.从不同太阳天顶角处的电子产生率剖面的形态来看,随着天顶角的增加最大电离率减少,但高度增加.计算还显示了在太阳天顶角小于90°的区域内电子产生率的垂直分布有明显的双峰结构,这种结构对应着电离层的E区和F区,但在天顶角大于90°区域,F区的电子产生率要大得多.考虑到离子和电子的复合过程,这一区域的总电子含量的增加主要产生在高F区.      

壳体内腔大深度T型刀加工方案分析

对于外形、内腔结构复杂,零件体积大,材料去除率高等特点的壳体,锻件加工要求所编制的数控程序异常复杂,数据庞大,手工编程难以编制程序。采用UGCAM作为编程手段,利用3维实体辅助编程技术解决此类问题。     

Subsidence rate monitoring of Aghajari oil field based on Differential SAR Interferometry

Land subsidence, due to natural or anthropogenic processes, causes significant costs in both economic and structural aspects. That part of subsidence observed most is the result of human activities, which relates to underground exploitation. Since the gradual surface deformation is a consequence of hydrocarbon reservoirs extraction, the process of displacement monitoring is amongst the petroleum industry priorities. Nowadays, Differential SAR Interferometry, in which satellite images are utilized for elevation change detection and analysis – in a millimetre scale, has proved to be a more real-time and cost-effective technology in contrast to the traditional surveying method. In this study, surface displacements in Aghajari oil field, i.e. one of the most industrious Iranian hydrocarbon sites, are being examined using radar observations. As in a number of interferograms, the production wells inspection reveals that surface deformation signals develop likely due to extraction in a period of several months. In other words, different subsidence or uplift rates and deformation styles occur locally depending on the geological conditions and excavation rates in place.     

机载单站只测向定位最优机动研究

概述了机载单站只测向定位最优机动求解算法，研究了基于最大方位角变化率准则下的观测机机动轨迹，得到理论上的最优定位机动，并结合实际运用，分析出两种近似最优的机动：“一”形（直线形）机动和S形机动，通过仿真，验证了这2种机动方式在一定条件下可以等效于最优机动，具有良好的定位效果。     

复合推进剂侵蚀燃烧特性的κ-ε参数表征

本文从推进剂侵蚀燃烧机理分析出发,综合片型装药发动机中止燃烧试验与相应的燃烧室内流场N-S方程组STMPLE方法数值分析的特点,导出一种由燃面上k~2/ε和p参数表述推行剂侵蚀特性的新方法,并成功地应用于4B丁羟复合药侵蚀特性的研究中.     

飞机电气系统参数测试标准实施中问题分析

结合本标准宣贯、研讨会上所提供的信息,分析了飞机电气系统参数测试标准在实际应用中存在的一些问题,并对瞬态电压和频率调制率等重点问题进行了详细的讨论和分析.     

Optimum parameter matching obtained by experiments for coring drilling into lunar simulant

This paper performs a series of ground experiments (on the Earth) to obtain optimum parameter matching for a future core drill on the Moon. Three common stages, I, II, III, are recognized with respect to the cut per revolution (CPR), which is defined as the ratio between the feeding speed and the rotating speed. The optimum matching between the feeding speed and the rotating speed for drills locates at the boundary position between Stage II and Stage III, where the coring rate saturates and the weight on the bit and the driving torque are still low. Further data analysis of the ground experiments reveals that the optimum matching signifies a proportional relation between the maximum conveying rate (MCR) by the groove of the auger and its rotating speed. The kinetic analysis in an ideal condition without gravity, the friction from the auger groove and the pressure at the bit confirm a similar proportion. The correlation between the proportions needs further study to determine whether the optimum matching obtained on the ground can be directly applied to future drills on the Moon.     

嵌金属丝推进剂燃烧起始阶段增速特性研究

考虑了使用嵌金属丝装药的发动机工作过程中的多种因素,建立了金属丝与药柱、燃气间相互作用的控制方程组,并对方程组进行了数值求解,得到了嵌金属丝推进剂在燃烧起始阶段,增速比随时间的详细变化过程。结果表明,金属丝的热扩散率、熔点、直径和黑度以各自不同的方式影响金属丝的增速效果,熔点相对较低的金属丝可能会在内弹道曲线的初始阶段形成一个轻微的压强峰,固有燃速较低、着火温度较低的推进剂对嵌入金属丝较为敏感。文中数值方法计算量小,结果可靠,适于工程应用。     

一类基于四面体组合单元的模块化构架式可展开天线机构

针对现有基于四面体单元的构架式天线机构结构复杂、收拢率低、运动副数量多等问题，基于3RR-3RRR四面体组合单元和基于3RR-3URU四面体对称组合单元分别提出了两种新型模块化可展结构。以3个组合单元组成的模块化结构为分析对象，首先，详细介绍了模块化结构的组成及虎克铰轴线布置，并利用组合单元本身的自由度数目及性质，采用拆杆-等效-复原的思想，应用螺旋理论和G-K公式分别对提出的两种模块化结构进行了自由度分析，得到了自由度数目及性质。其次，应用Adams动力学仿真软件对两种模块化结构进行运动仿真，仿真结果验证了自由度分析的正确性。以完全展开和完全收拢时机构所占的空间体积比值表征该机构的收拢率，计算现有基于四面体单元的非模块化机构与提出的模块化机构的收拢率。最后，对比分析非模块化机构与模块化机构的自由度数目、运动副数目及收拢率。分析结果表明，基于3RR-3URU四面体对称组合单元的模块化结构既能实现较大收拢率，自由度及运动副数目也相对减少，且组成大型天线时杆件类型较少。研究结果为该类模块化构架式可展天线结构的设计与分析提供一定理论依据。