径向气体轴承-柔性转子耦合系统动力学研究

采用轨迹法对径向气体轴承(纯动压径向气体轴承、动静混合径向气体轴承)-柔性转子耦合系统的非线性动力学特性进行研究.建立柔性转子系统的多自由度模型,通过变方向隐式(ADI)方法实现瞬态气体润滑雷诺方程(含时间项)与转子动力学方程的耦合求解,通过数值仿真获得了系统在不同偏心质量作用下的非线性气膜力、轨迹图、相图、频谱图、能量谱图、分岔图、振型图及重力作用下轴承的平衡位置分布图.针对所采用的轨迹法的特点,研究了相应的非线性动力学参数获取方法.结果表明,轨迹法能够很好的描述径向气体轴承转子动力学特性及其气膜涡动现象,为径向气体轴承-柔性转子系统设计奠定基础.      

先进战斗机纵向飞行特性与放宽静稳定度研究

放宽静稳定度在先进战斗机设计领域已获得广泛应用,与其相关的主动控制技术仍有进一步研究的价值,需要对放宽静稳定度对飞机纵向飞行性能的影响进行更全面的分析。以重心后移作为放宽静稳定度的方式,分析放宽静稳定度与某型战斗机俯仰力矩系数的关系,构建战斗机非线性模型并进行开环特性分析,在此基础上,分析放宽静稳定度对飞机运行平衡点的影响机理,对战斗机非线性模型进行线性化,并分析放宽静稳定度对飞机纵向线性模型阶跃响应特性和长短周期模态特性的影响。结果表明：放宽静稳定度可增大战斗机的俯仰力矩系数,提高飞机性能,但可能会使飞机本体模态特性变差,需要在设计控制率时予以考虑。     

基于相平面法的结冰飞机纵向非线性稳定域分析

结冰是威胁飞机飞行安全的重要因素之一,研究结冰后飞机稳定性及稳定域范围对飞机操纵安全和飞行安全极其重要。由于结冰后大飞机失速迎角提前,仅仅研究小迎角线性阶段的飞行稳定性显然不能满足要求。首先根据飞机迎角和升力曲线非线性关系建立了结冰条件下大迎角阶段飞机纵向非线性系统模型,然后通过相平面法刻画了迎角和俯仰角速度构成的不同飞行状态下飞机的纵向运动的稳定域,并探讨了迎角和俯仰角速度对纵向稳定性的影响规律,最后针对稳定域内外的不同初始状态,进行了零输入响应时域仿真,验证了相平面法确定的稳定域的有效性和准确性。研究结果可为飞机结冰后的稳定边界确定和边界保护提供一定的参考。     

考虑喷注流强分布的纵向稳定性建模与分析

喷注器流强分布是除声学阻尼装置以外使液体火箭发动机稳定工作的重要措施,通过控制喷注流强分布使推进剂的燃烧尽量远离主要振型的波腹区,减少热声耦合振荡的能量源,从而达到抑制高频振荡的效果。因此,建立喷注流强分布与稳定性之间的综合分析模型,研究流强分布的不稳定性抑制特性具有重要实际意义。针对采用自击式喷嘴器、液滴蒸发作为燃烧速率控制过程的某自燃推进剂缩尺燃烧室高频纵向燃烧不稳定问题,近似采用蒸发速率峰值区代替集中燃烧释热区,引入燃烧室三维声学控制方程以考虑多喷嘴条件下燃烧响应空间分布,建立了针对喷注器流强分布条件下的高频纵向燃烧稳定性分析模型,并对喷注流强的稳定性抑制特性进行了分析,给出了不同分布流强下燃烧室一阶纵向信号的增长率变化规律。研究表明,喷注流强分布有利于燃烧室稳定,"驼峰区"喷注孔径的增大对改善高频纵向不稳定性更为显著,"驼峰区"流强增加30%,相应的增长率降低15%。     

Quality variation of GPS satellite clocks on-orbit using IGS clock products

Over 60% clocks on board of the GPS satellites are working longer than their designed life. Therefore realizing their stabilities in a long time scales is essential to GPS navigation and positioning plus IGS time scale maintaining. IGS clock products from 2001 to 2010 are used to analyze the GPS satellite clock qualities such as frequency stabilities and clock noise level. We find out that for the clocks of Block IIA satellites the frequency stabilities and clock noise are 10 times worse than that of the Block IIR and IIR-M satellites. Moreover, the linear relationships between frequency stabilities and clock residuals have been deduced with an accuracy of better than 0.02 ns. Specially, it is noticed that the clock of the PRN27 is instable and the relationship between the frequency stability and residuals is at least a quadratic curve. Therefore, we suggested that GPS satellite clocks should be weighted by their quality levels in application, and the observations of the Block IIA should not be used for real-time positioning which required precision better than one meter.     

复合材料帽形加筋结构稳定性研究

建立了复合材料帽形加筋结构的参数化有限元模型,给出了两种进行层板结合处的模拟计算方法,通过计算得到了模型的屈曲载荷并总结了加筋结构几何参数对结构稳定性的影响,给出了模型的收敛性分析,对比了模型网格密度对于计算结果的影响,找到最佳的网格密度,提高了模型计算的效率和准确性,为实际的结构设计提供了重要参考,为结构分析提供了依据。     

航空发动机多路模糊切换控制系统设计

针对航空发动机在不同控制通路切换过程中出现的转速等参数发生大幅度跳变以及系统不稳定的问题,提出了一种模糊切换控制方法,设计了基于不同结构控制通路的模糊切换控制器,基于无源性概念对航空发动机多路模糊切换控制系统进行了稳定性分析,得到了多路模糊切换控制系统稳定的充分条件。航空发动机模糊切换系统与直接切换系统仿真结果表明了航空发动机多路模糊切换控制方法的有效性。     

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

The thermal and dimensional stability of epoxy resin (EP) in-situ modified by cyanate ester (CE) and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy (FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40% CE makes the blending system exhibit the lowest initial decomposition temperature, which reduces by 15.5% and 40.8% compared with pure EP and CE, respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80% CE shows the lowest volume shrinkage of 6.11%. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80% CE into EP results in the lowest thermal stress in the blending system, which indicates that the system has the lowest volume shrinkage, which agrees well with the experimental results.     

总压畸变在三级轴流压气机中的传递性能研究

介绍了一种计算进气畸变的方法.通过求解非稳态三维欧拉方程,计算压气机各截面气流参数分布.以74A三级压气机为例,进行了周向总压畸变传递特性计算,得到了压气机进口存在总压畸变时总压、静压、总温和流量系数在各截面上的分布规律,得出了畸变强度、畸变范围和畸变位置在轴向上的分布规律.