自由返回轨道的P平面参数快速设计方法

针对自由返回轨道求解过程中地心轨道类型变化造成的B平面参数方法计算失败问题,提出一种基于P平面参数的自由返回轨道快速设计方法。首先,基于轨道半通径参数的普适性,给出了不同轨道类型的P平面参数定义,建立了以P平面参数为求解目标量的自由返回轨道求解模型。其次,给出了基于P平面参数的自由返回轨道快速设计方法,在构建的瞬时地月惯性系下,以平面双二体自由返回轨道作为初值,实现了高精度力模型下的自由返回轨道快速求解。对8种构型自由返回轨道的设计结果表明,P平面参数具有类似于B平面参数的大收敛域,且有效解决了轨道类型变化对计算的影响,可直接应用于中国后续月球探测任务轨道设计。     

基于高效数值方法的一种高超声速飞行器外形气动力/热综合优化设计研究

基于所发展的高效气动力/热快速预测方法,建立了适用于高超声速飞行器的综合考虑气动力与气动热特性的外形优化设计技术,并在一种高超声速飞行器外形设计中应用,通过优化设计改变了初始外形纵向静不稳定特性,优化后外形实现了纵向静稳定、大攻角自配平和非驻点表面最大热流下降的设计目标。所发展的方法为适应气动外形快速选型设计需求提供了有效的途径。     

一类空间对称6R机构的运动学研究及组合应用

可展开平板机构已广泛应用于平板天线、太阳翼等航天机构产品。为提高可展开平板机构的刚度和展收比,将空间对称6R机构应用于可展开平板机构设计。首先,根据约束条件,计算后给出了一种空间3R运动链的几何参数关系;然后,结合螺旋理论,分析了该3R运动链的约束螺旋系;进而根据对称性,研究了空间对称6R机构的自由度、奇异性等运动特征;在此基础上,提出了一种特殊的空间对称6R转动机构;最后,研究了空间对称6R机构的组合方法,设计出一种新型单自由度可展开平板组合机构,并对其进行了运动学仿真验证。该可展机构具有二维方向的展开收拢能力,为可展开平板机构的创新设计提供了有益参考。     

Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

大型回流边界层风洞的气动与结构设计

大型边界层风洞是开展风工程研究的必备装备。以浙江大学ZD-1边界层风洞的研制为背景,详细介绍了大型回流边界层风洞气动设计和立式结构设计中的关键问题,在风洞气动设计时采用了收缩比为4∶1的单回路单试验段气动轮廓,在试验段中设置了0．22°的当量扩散角,对拐角导流片外形作了特殊处理,并采用钢结构与混凝土结构相结合的立式结构。流场校验结果表明,大型回流边界层风洞的气动与结构设计能满足设计要求,某些指标甚至达到航空风洞的标准,在试验段中设置扩散角有利于降低轴向静压梯度,立式结构设计对提高试验段气流的水平均匀性有一定的作用,可为今后类似风洞的研制提供参考。     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

定向破坏复合材料层合壳体结构铺层的分析与设计

以复合材料层合板为基本材料设计了一种结构新颖的定向破坏复合材料层合壳体结构,在导弹与

该壳体结构的初始接触区域预制缺陷区,导弹发射时以四瓣形式开裂,大幅度提高了导弹的发射效率。利用ANSYS

有限元模拟分析软件,通过强度分析确定了最佳铺层设计方案,单层板厚度为0.2 mm,采用基体本身加强预

置缺陷区的[0°/90°/ ±45°]2S 铺层方式。该种铺层方式的爆破载荷为0.21 MPa,最小顶破载荷为1 kN,完全能够

满足其在工作环境下既能承受一定的压力不漏气又能在较小的顶破载荷下自行破裂的设计要求。

     

弹射筒内筒组件钢球收压及检测工艺

本文对航空火箭弹射座椅弹射筒内筒钢球收压技术要求、难点进行了工艺分析;介绍了钢球收压工艺技术难点、检测方法及注意事项等,在工艺技术研究及设计过程中取得了一定的技术积累,具有良好的借鉴、推广应用意义。     

S形蒙皮零件成形工艺

通过运用S3F软件对S形蒙皮拉形过程进行模拟仿真分析,评估S蒙皮拉形工艺性;预测拉形过程中将产生的缺陷;制定合理工艺方案;优化零件设计和模具结构;实现了该蒙皮零件在数控蒙皮拉伸机上的拉形。