Association of optical tracklets from a geosynchronous belt survey via the direct Bayesian admissible region approach

The direct Bayesian admissible region approach is an a priori state free measurement association and initial orbit determination technique for optical tracks. In this paper, we test a hybrid approach that appends a least squares estimator to the direct Bayesian method on measurements taken at the Zimmerwald Observatory of the Astronomical Institute at the University of Bern. Over half of the association pairs agreed with conventional geometric track correlation and least squares techniques. The remaining pairs cast light on the fundamental limits of conducting tracklet association based solely on dynamical and geometrical information.     

超声速低声爆布局分层优化方法

声爆抑制是发展新一代超声速民机必须突破的关键技术。总体布局参数的合理设计可以使飞行器具有良好的声爆特性。为了提高全局进化算法在布局设计中的优化效率,提出一种基于数据挖掘的分层优化方法,利用数据挖掘中的决策树算法提取设计知识,获得设计变量分层信息,指导低声爆布局分层优化;针对某超声速低声爆飞行器,选取后掠角、上反角、展弦比、梢根比、长细比五个总体布局参数作为设计变量,开展分层优化数值实验,并与一体化优化形成对比验证。结果表明：分层优化方法能够搜索到与一体化优化高度吻合的最优解,分层优化的收敛速度显著高于一体化优化,且对随机寻优历程的表现更稳健。     

Stability analysis of robotic longitudinal-torsional composite ultrasonic milling

Currently, industrial robots are considered as an alternative towards traditional machine tools. Especially for the large-scale parts milling, robotic flexibility and low cost make it possess the irreplaceability. However, the milling chatter caused by its weak rigidity hampers robotic application and promotion severely in aviation industry. Rotary ultrasonic milling (RUM) technology with one-dimensional axial vibration has been proven and approved on avoiding robotic chatter. Based on this, the research of project team demonstrates that longitudinal-torsional composite ultrasonic milling (CUM-LT) involving separation characteristic has a greater advantage than RUM in terms of chatter suppression. Thereby, the CUM-LT as a new means is applied to avoid processing vibration of robotic milling system. And its influence mechanism on stability improvement of weak stiffness processing system is clarified. Meanwhile, the approaches to strengthen separation effect are provided innovatively. Moreover, a new analysis method of robotic CUM-LT (RCUM-LT) stability is proposed on the basis of ultrasonic function angles. The simulation and experimental results indicate that compared with robotic RUM (RRUM), stability regions of separated RCUM-LT (SRCUM-LT) and unseparated RCUM-LT (URCUM-LT) are improved by 124.42% and 39.20%, respectively. The addition of torsional ultrasonic energy has a wonderful effect on the milling chatter suppression of low stiffness robots.     

过滤式阴极电弧沉积类金刚石薄膜的特性分析

利用自行研制的过滤式阴极电弧沉积装置,在硅片和高速钢基体材料上获得了类金刚石薄膜,分别采用扫描电镜、原子力显微镜、喇曼光谱以及磨损实验等手段对薄膜进行了分析研究。结果表明,所获得的类金刚石薄膜为非晶态,sp3含量最高达70%;基体材料对成膜质量影响较大,在硅片上薄膜的摩擦系数可达0.08;同时偏压的变化会引起喇曼谱线中D峰和G峰位置向低频移动,半高宽σG增大、σD减小。     

UC3843控制多路输出开关电源设计与实现

介绍了采用UC3843控制器的单端反激式开关电源的设计与实现,讲述了UC3843控制器内部电路及其特点,通过具体的多路输出开关电源设计实例分析了设计的主要步骤以及实际设计中应注意的问题,并提出了抑制噪声的措施,最后给出了该电源的性能测试数据。     

双S弯二元排气系统遮挡偏距比对壁温与红外辐射影响的试验研究

为了探究不同遮挡偏距比双S弯排气系统的红外特性,试验研究了遮挡偏距比为55%和100%的双S弯二元排气系统的壁面温度分布和红外辐射特性,并与相应的基准轴对称排气系统进行了对比分析。结果表明：S弯喷管壁温整体要比基准轴对称喷管高约25%,第一S弯下游的上壁面附近存在局部高温区,提高S弯喷管遮挡偏距比后,温度梯度加剧,热应力集中。与基准轴对称排气系统相比,55%和100%遮挡偏距比双S弯二元排气系统均具有突出的红外抑制效果,正尾向（α=0°）红外辐射强度分别降低77.7%和79.3%。从温度和红外辐射强度综合评价,遮挡偏距比并非全遮挡最好,遮挡偏距比从55%提高到100%后,仅能有效抑制上方探测面α=5°和10°的红外辐射,而基本不会改变尾向其他探测方向的红外辐射,在工程设计时应权衡优化损失。     

双馈异步风力发电机气隙偏心故障诊断研究现状与发展

双馈异步风力发电机(DFIG)机械故障在实际运行中尤其不可忽略,不论是转子刚度不足还是轴承磨损或安装误差,都会导致气隙偏心,严重时甚至会烧毁电机,因此对风机进行准确高效的气隙偏心故障诊断至关重要。简单介绍DFIG产生气隙偏心的故障机理,再对当前已有的相关故障诊断方法做重点归类阐述,最后展望未来的DFIG气隙偏心故障诊断方法的发展趋势和方向。     

基于磁链辨识的无轴承薄片电机轴向振动抑制策略

为了进一步提高BPMSM的悬浮性能,提出了一种基于磁链辨识的BPMSM轴向振动抑制策略,通过转子磁链的变化来估测转子轴向偏移量,然后将轴向偏移量转化为d轴电流分量参考值i*d,通过对i*d的调节来改善薄片转子的轴向恢复力,实现对轴向振动的有效抑制,从而有效改善电机的悬浮性能。试验结果表明:所提出的轴向振动抑制策略能够对薄片转子轴向振动进行有效抑制,提高系统的抗干扰能力,系统的运行性能得到了有效改善。     

非均匀环境下利用单个数据集的STAP算法

对非均匀环境下利用单个数据集的机载雷达空时自适应处理(SDS-STAP)算法进行了研究。针对现有单个数据集类空时自适应算法存在的问题,提出了一种基于对待测数据集进行空时二维滑窗处理的二维幅度相位估计(2D-APES)算法。该算法利用回波的统计信息,不仅放宽了算法处理器对于雷达系统阵元数与脉冲数选取的约束,而且能够有效抑制杂波及待测单元内的干扰,同时降低了处理器的计算复杂度。最后,仿真数据及实测数据实验验证了所提算法的正确性与有效性。     

Spectroscopic data and Stark broadening of Cu I and Ag I spectral lines: Selection and analysis

Optical emission and linear laser absorption spectroscopy techniques were used in investigation of plasma with copper and silver admixture. The method of selection of spectral lines and spectroscopic data with the aim of diagnostics of multicomponent air plasma with two metal vapors admixture was developed. Energy level populations behavior on the Boltzmann plot were used for Cu I and Ag I spectroscopic data selection. In this way the selection of spectroscopic data for some of Cu I and Ag I lines was realized. Stark broadening parameters of Cu I and Ag I were examined. Experimentally obtained temperature and electron density radial distributions were used in the calculation of plasma composition in the assumption of local thermodynamic equilibrium. Linear laser absorption spectroscopy was used to examine the state of plasma.