场发射电推力器的参数选择与调控方法

场发射电推力器具有几种不同的发射模式,分别产生荷质比不同的带电液滴或带电离子,使得不同模式下推力性能差别显著。针对不同的空间应用,需要设计不同种类的场发射电推力器,使其达到相应的推力参数。为此对场发射电推力器的发射过程展开分析,确定了推力参数的调控方法。首先对场发射电推力器的基本工作原理进行了阐述,并对不同发射模式的基础物理机制进行了分析。在此基础上通过理论计算得出采用不同推进剂可达到不同发射模式这一结论,并最终得出推力器性能参数的调控方法,论证了推力性能受到推进剂种类和发射模式的影响,在离子发射模式下处于高比冲、低推力工况,而液滴发射模式下处于低比冲、高推力工况。此外推力参数还受到供给流量、外加电压等多种因素的影响。在得到推力器参数的调控方法后,设计了一种主动供给型离子液体电推力器,以离子液体EMI-BF₄作为推进剂,进行了相应的试验研究。通过改变外加电压,实现了对推力器推力性能的调控,证实了此调控方法的可行性。推力器达到的推力范围为1.6～10μN,比冲范围为154～978 s。     

钛掺杂氧化镁薄膜二次电子发射倍增特性研究

氧化镁具有较高的二次电子发射系数,适合作为制备多级放大装置的二次电子发射材料。文章采用磁控溅射法制备高质量氧化镁薄膜和钛掺杂氧化镁薄膜,并对薄膜进行形貌表征,研究其二次电子发射倍增特性,包括氧化镁薄膜电子倍增器的增益特性以及增益衰减情况。结果表明：高压源电压和电流的增大均可提高电子倍增器的电流增益倍数;掺杂Ti不仅能提高电子倍增器的增益效能,且相比纯氧化镁薄膜,钛掺杂氧化镁薄膜的增益衰减明显放缓,能够将倍增器的寿命延长2倍以上。     

Solitary and periodic waves in magneto–rotating plasmas: Effect of the Kappa–Cairns distributed electrons

The nonlinear propagation of ion–acoustic (IA) waves in a magneto–rotating plasma is studied by considering the Kappa-Cairns electron distribution. Employing the perturbation scheme, Korteweg–de Vries equation is derived. It is seen that both positive and negative potential solitons can be supported in the present plasma model. The numerical results reveal that the Kappa-Cairns distributed electrons modify features of the electrostatic waves significantly. The effects of non–thermal parameters, plasma rotation frequency, ion temperature, and the wave propagation angle on electrostatic solitary wave structures are also discussed here. It is found that the plasma parameters considerably influence the propagation of IA waves in rotating plasmas. Furthermore, using the bifurcation theory of planar dynamical systems to the K-dV equation, we have presented the existence of solitary and periodic traveling waves. Our study may be helpful to understand the behavior of ion–acoustic wave in the rotating plasma.     

航空发动机气动声学设计的理论、模型和方法

根据对飞机噪声控制技术历史发展演化过程的总结分析，研究了民用航空发动机气动与声学一体化设计的目标、方法、流程、理论模型和发展趋势等。基于对航空发动机气动设计过程的分析，给出了航空发动机气动与声学一体化设计的流程和方法。分别从“发动机总体热力循环设计”“发动机部件通流设计”“发动机部件三维详细设计”等三个流程，介绍了航空发动机声学设计理论和技术国内外的发展情况，详细论述了发动机气动声学设计的理论、模型和方法，分析了目前航空发动机声学设计理论的主要问题及未来的研究重点，并以具体发动机设计实例分析了不同设计阶段航空发动机的气动与声学一体化设计方法思想。     

气动噪声风洞试验技术发展概述

在大量查阅国内外相关技术文献的基础上,对风洞声学试验技术的发展历程进行了分析与总结,并对目前试验的两大关键技术领域——声学风洞与麦克风相阵列作了比较详细的介绍与讨论。通过对国内外气动噪声试验技术状况的调查研究,充分阐释了目前中国发展该项技术的必要性和迫切性,并提出了相应的建议。     

负载对超声加工声学系统特性的影响

以一维超声振动系统为研究对象,以点、线、面三种不同的加载方式对工件进行加载,研究了负载对超声加工声学系统特性的影响。实验表明,当以点、线的加载方式对工件进行加载时,载荷的变化对声学系统特性各参数的影响不大;而当加载方式为面接触时,机械品质因数Qm、谐振频率fs和动态电阻R随着载荷F的增大有明显的增大趋势,动态电容C和最大电导Gmax却随着载荷F的增大而减小。     

Solitary,explosive and periodic solutions for electron acoustic solitary waves with non-thermal hot ions

A theoretical investigation has been made for electron acoustic waves propagating in a system of unmagnetized collisionless plasma consists of a cold electron fluid and ions with two different temperatures in which the hot ions obey the non-thermal distribution. The reductive perturbation method has been employed to derive the Korteweg–de Vries equation for small but finite amplitude electrostatic waves. It is found that the presence of the energetic population of non-thermal hot ions δ, initial normalized equilibrium density of low temperature ions μ and the ratio of temperatures of low temperature ions to high temperature ions β do not only significantly modify the basic properties of solitary structure, but also change the polarity of the solitary profiles. At the critical hot ions density, the KdV equation is not appropriate for describing the system. Hence, a new set of stretched coordinates is considered to derive the modified KdV equation. In the vicinity of the critical hot ions density, neither KdV nor modified KdV equation is appropriate for describing the electron acoustic waves. Therefore, a further modified KdV equation is derived. An algebraic method with computerized symbolic computation, which greatly exceeds the applicability of the existing tanh, extended tanh methods in obtaining a series of exact solutions of the various KdV-type equations, is used here. Numerical studies have been reveals different solutions e.g., bell-shaped solitary pulses, singular solitary “blowup” solutions, Jacobi elliptic doubly periodic wave, Weierstrass elliptic doubly periodic type solutions, in addition to explosive pulses. The results of the present investigation may be applicable to some plasma environments, such as Earth’s magnetotail region.     

Cut-off features in interplanetary solar radio type IV emission

Solar radio type IV bursts can sometimes show directivity, so that no burst is observed when the source region in located far from the solar disk center. This has recently been verified also from space observations, at decameter wavelengths, using a 3D-view to the Sun with STEREO and Wind satellites. It is unclear whether the directivity is caused by the emission mechanism, by reduced radio wave formation toward certain directions, or by absorption/blocking of radio waves along the line of sight. We present here observations of three type IV burst events that occurred on 23, 25, and 29 July 2004, and originated from the same active region. The source location of the first event was near the solar disk center and in the third event near the west limb. Our analysis shows that in the last two events the type IV bursts experienced partial cut-offs in their emission, that coincided with the appearance of shock-related type II bursts. The type II bursts were formed at the flanks and leading fronts of propagating coronal mass ejections (CMEs). These events support the suggestion of absorption toward directions where the type II shock regions are located.     

Use of coated silicon field emitters as neutralisers for fundamental physics space missions

Spacecraft neutralisers are required as part of the ion propulsion system for accurate station keeping in fundamental physics missions. This paper describes the use of thin layers of insulating materials as coatings for the gated silicon field emitter array structure used in a spacecraft neutraliser. These thin coatings are postulated to reduce power consumption and reduce overheating. The power consumption and lifetime of aluminium nitride and amorphous hydrogenated diamond-like carbon coatings have been tested by current–voltage and endurance tests. Diamond-like carbon coatings were promising, performing better in endurance tests than uncoated samples, but further work is required to characterise the coating’s physical properties and its effects on field emission. The thermal conductivity of the coating material had little effect on measured sample lifetimes. Aluminium nitride had reduced power consumption compared to diamond-like carbon coated and uncoated samples. A thin (∼5 nm) layer of aluminium nitride was found to be optimal, meeting European Space Agency specifications for the neutraliser engineering model.     

基于自航式声诱饵对抗的机载鱼雷命中概率仿真

为研究潜艇使用自航式声诱饵对抗条件下直升机空投鱼雷命中概率,基于对舰艇引导直升机空投鱼雷的过程分析,建立了舰艇引导机载鱼雷攻潜的参数解算模型、自航式声诱饵对抗自导鱼雷模型,分析了鱼雷命中条件.以美国MK-46鱼雷为例,运用模拟法仿真研究了在自航式声诱饵对抗条件下机载鱼雷的攻潜效果,结论对自导鱼雷在对抗条件下攻击潜艇的作...