固体火箭发动机排气羽流对红外制导信号衰减的计算方法

固体火箭发动机排气羽流对红外制导信号的衰减研究,对红外信号的探测与制导具有重要的理论和应用价值。文中主要介绍了红外制导信号的衰减机理,提出了计算排气羽流红外制导信号衰减的有效方法,编制了计算软件DROP,用该软件计算了水雾及颗粒群的光谱透射比,并与SIRRM软件的计算数据进行了对比。结果表明,两者数据基本一致,在工程应用中具有较大的参考价值。     

空间用功率MOSFET器件2N7266总剂量

文章针对空间用功率MOSFET器件2N7266进行了60Co源γ射线辐射试验研究。在辐射过程中,采用JT-1型晶体管特性图示仪和计算机控制的摄像机实时监测器件电参数随辐射剂量变化的特征,通过试验研究获得了被试器件阈值电压、漏电流和击穿电压随总剂量变化的特征,得出了被试器件抗总剂量辐射的指标。研究结果可为被试器件在航天器型号的使用提供技术参考依据。     

一种具有电压支撑功能的改进无功注入策略

电压跌落是输配电系统面临的最严重的问题之一。随着分布式光伏电源在电力系统中的渗透率越来越高,国内外最新标准要求光伏逆变器必须具备低电压穿越能力。为了消除有功功率振荡,在传统的正/负序控制基础上提出了一种改进的有功/无功注入策略;针对现有电压支撑方法缺乏电压抬升范围控制,将三相电压幅值作为控制目标,详细推导了适用于不同电压跌落情况下的数学模型,得出为保证各相电压均保持在安全运行范围之内所需注入无功功率参考值。仿真结果验证了所提策略的正确性和有效性。     

用于故障穿越的飞轮储能双三相异步电机驱动控制研究

随着海上风电场的发展和高压直流输电技术的应用,风电场系统存在交流侧故障穿越的问题。针对这个问题,提出了一种用于故障穿越的基于模块化多电平变频器和双三相异步电机的飞轮储能系统,并设计了其驱动控制方案。飞轮储能系统采用了模块化多电平技术能方便地构建大功率高压变频器,并具备扩容能力。为了提高飞轮储能系统的可靠性,采用了双三相异步电机驱动,从而提高了冗余性。接着设计了能均衡各个模块电容电压的双三相异步电机驱动控制算法。最后,基于MATLAB/Simulink仿真平台建立了风电场和飞轮储能系统的仿真模型,进行了仿真计算。仿真结果验证了飞轮储能系统的功能和驱动控制策略的性能。     

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

Relay selection in cooperative communication systems over continuous time-varying fading channel

In this paper, we study relay selection under outdated channel state information (CSI) in a decode-and-forward (DF) cooperative system. Unlike previous researches on cooperative commu-nication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER) of the cooperative system under contin-uous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS) strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS) strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.     

弧齿锥齿轮啮合迹方向角的主动设计方法

为了实现弧齿锥齿轮设计规定的啮合迹方向,以局部综合法为基础,结合轮齿接触分析技术和无约束优化方法,进行弧齿锥齿轮啮合迹方向角的主动设计,给出了1种实现齿面参考点处啮合迹目标方向角的设计方法。通过1对弧齿锥齿轮的实例演示,论证了该方法对弧齿锥齿轮啮合迹方向角进行主动设计的可行性。结果表明:局部综合法中的输入啮合迹方向角必须小于旋转轴平面中规定的角度;在调整啮合迹方向角的过程中,传动误差曲线没有发生畸变。     

空空导弹惯性开关中圆周磁场对导弹性能的影响

为了提高空空导弹的作战效能和可靠性,由弹载电源向开关电路进行大电流放电,可提高惯性开关中圆柱电极上周磁场的强度,增强抵抗磁钢对钢珠反向作用力的能力,当导弹撞击目标过载较小时,使惯性开关的导通时间也能够满足触发电路工作需要,因此,导弹遇目标不炸的故障概率可得到下降。     

噪声调幅干扰信号波达方向估计研究

利用噪声调幅干扰信号频谱结构的特殊性,提出基于阵列接收信号载频处频域数据的波达方向估计算法,通过仿真分析表明该算法的角度估计性能明显高于目前广泛采用的比幅比相单脉冲测角法,并且计算量也大大低于传统的波达方向估计算法.     

卫星遥测功率谱分析和调制度测量方法研究

残余载波调制是卫星测控中的常用调制体制。文章从理论上给出了该体制下信号的功率谱密度表达式,得到奇次谐波谱线展宽等结论,并通过仿真和实验进行了验证。利用所得结论讨论了遥测调制度测量方法,提出通过功率谱的2阶边带进行测量可以使结果得到改善。