用光散射效应分析激波管内膨胀率对水蒸气成核与凝结的影响

用多重光散射法对水蒸气在激波管中的自发成核凝结过程进行了实验研究，分析了膨胀率对成核率和凝结过程的影响。根据理论计算和实测数据结果，所得结论是：膨胀率增大。会造成过饱和度、成核率、凝结质量份额和液滴生长率相应地增大。     

目标电磁散射特性的混合法研究

从Ｓｔｒａｔｔｏｎ－Ｃｈｕ公式出发，利用阻抗边界条件，得出阻抗边界条件积分方程，将目标表面分成不同的区域，有些区域用高频解析方法求出其表面电流，有些区域利用矩量法解阻抗边界条件积分方程得表面电流。本文以橄榄体（包括介质涂敷情形）为例，计算其电磁散射特性，混合法计算结果与实测结果或其他方法的计算结果比较吻合。     

生物组织光学参数：优化散射系数（μ’s）的实时在位测定

利用了一套特殊设计光纤探头组成的稳定态光纤光谱仪测试生物组织的光学参数，从悬乳液(Intralpid)与模拟胶(Phantom)实验推导出优化散射系数(Reduced scattering coeffcient：μ’s)近红外谱测量经验公式。测量反射系数就可以计算出优化散射系数谱。计算结果用模拟胶作了验证，并对大鼠脑组织μ’s进行了实时在位测量，从而得到了一种μ’s在位测量的有效方法。     

Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

基于等效板的含离散源损伤机翼结构分析

研究离散源损伤对机翼结构的影响,可以大幅度提高飞机在不良损伤事故下的生存能力.由于机翼内部结构复杂,很难对含离散源损伤机翼结构进行精确分析,而且精确的建模和仿真在建模与计算过程中往往也非常耗时.因此,以含离散源损伤机翼为对象,采用有限元优化设计方法,确立了一种机翼结构等效板模型的建模方法.建立的等效板模型可对含离散源损伤机翼实现快速、准确的静力学和动力学分析.     

An Artificial Neural Network based approach for estimation of rain intensity from spectral moments of a Doppler Weather Radar

By using a Doppler Weather Radar (DWR) at Shriharikota (13.66°N & 80.23°E), an Artificial Neural Network (ANN) based technique is proposed to improve the accuracy of rain intensity estimation. Three spectral moments of a Doppler spectra are utilized as an input data to an ANN. Rain intensity, as measured by the tipping bucket rain gauges around the DWR station, are considered as a target values for the given inputs. Rain intensity as estimated by the developed ANN model is validated by the rain gauges measurements. With the help of a developed technique, reasonable improvement in the estimation of rain intensity is observed. By using the developed technique, root mean square error and bias are reduced in the range of 34–18% and 17–3% respectively, compared to Z–R approach.     

螺旋相位板生成涡旋电磁波仿真研究

涡旋电磁波的产生方式有多种,使用涡旋相位板即为其中重要的一种方式。该文对螺旋相位板产生涡旋电磁波的情况进行了仿真.通过仿真。给出了在喇叭天线口面上覆盖螺旋相位板时生成的涡旋电磁波的幅度相位分布。     

不同进口截面下液力透平非定常压力脉动计算

为了研究不同进口截面对液力透平内压力脉动的影响,利用CFX软件对一单级液力透平进行非定常数值计算,通过设置监测点,计算各监测点在不同进口截面下的压力脉动,通过快速傅里叶变换将其压力脉动计算结果做相应分析,分析各监测点处压力脉动的时域和频域分布.结果表明:蜗壳内在大蜗壳进口下,随着蜗壳进口直径的增加,每个监测点处的压力逐渐增加,而在小蜗壳进口下,每个监测点处的压力逐渐减小.在距离蜗壳收缩管较远处,大蜗壳进口下的压力脉动较小,而在距离收缩管较近处,小蜗壳进口下的压力脉动较小.在叶轮内不同进口截面压力脉动的差异在同一时刻从进口到出口逐渐减小.尾水管内在小蜗壳进口下尾水管进口处的压力脉动最大.      

树脂基导电纳米复合材料电磁屏蔽性能的研究进展

随着5G时代的来临,电磁污染问题日益严重。电磁屏蔽是解决电磁污染的有效方法,已成为人们关注的热点。导电纳米粒子具有优异的导电性及其独特物理特性,其树脂基复合材料可作为轻质高电磁屏蔽效能的电磁屏蔽材料。本文主要介绍了含有导电一维纳米粒子（碳纳米管、银纳米线）和二维纳米粒子（石墨烯、MXenes）的树脂基复合材料在电磁屏蔽性能方面的研究进展,进一步对其发展趋势进行了展望。     

电磁测力系统研究

介绍了电磁测力系统中静磁场分析与优化、通电线圈位置控制方法及提高线性度的自校准方法。运用Maxwell 3D进行仿真计算,得到了相对优化的磁密及磁均匀性,通过控制通电线圈在磁场中位置及分段线性微分技术,提高了电磁测力准确度。构建了试验装置,对比试验数据表明,该研究措施对于提高电磁测力准确度取得了较好效果。