风场对重力波的滤波现象

对MillstoneHill台站数字测高仪DGS－256漂移探测数据进行的分析表明，背景风场对重力波扰动具有明显的滤波作用．这种滤波效应主要表现为：扰动传播方向具有顺时针旋转的日变化特征，扰动相对出现率峰值出现在扰动传播方向与背景风场方向之间的夹角为180°－225°之间．扰动时空尺度越小，其传播越趋向于逆风场方向．     

基于任务段的航空发动机载荷谱聚类方法

针对航空发动机飞行任务剖面分类问题,对发动机31个飞行任务剖面进行了聚类分析。选取飞行高度和飞行马赫数作为划分飞行任务剖面的参数, 依据其对应的飞行任务段均值生成聚类散点图,将剖面类型划分为5大类。结果表明:低空低速剖面在无量纲飞行高度为0~0.2、飞行马赫数为0.4~0.6区间,均值最低;高空高速剖面在无量纲飞行高度为1.2~2.2、飞行马赫数为1.0~1.8区间,均值最高;飞行任务剖面在无量纲飞行高度为0.2~1.2、飞行马赫数为0.6~1.0区间内最为集中;针对散点密集区域,可依据剖面特征进一步划分剖面类型;不同剖面间,飞行高度与飞行马赫数差异性强,利于剖面划分,而法向过载与转速差异性小,不利于剖面的划分。所提出的方法可以快速有效的对航空发动机飞行任务剖面进行聚类分析。      

弧线齿面齿轮齿面几何设计及径向齿宽特性

为适应航空领域对面齿轮传动的设计要求,综合弧线齿圆柱齿轮、面齿轮传动的各项优点,提出了弧线齿面齿轮齿面设计并研究了其径向齿宽特性。以端面渐开线齿廓弧线齿圆柱齿轮作为产形齿轮通过包络成形建立面齿轮齿面数学模型;结合齿面方程在MATLAB中进行齿面可视化分析,并通过MATLAB软件的数值计算和CATIA软件的复杂曲面造型实现面齿轮的参数化建模;确立内端根切、外端顶尖对径向有效齿宽的限制条件,计算面齿轮的径向有效齿宽,分析刀具齿轮的齿线圆弧半径和坐标系位置参数对径向有效齿宽的影响。研究表明:当增大齿线的圆弧半径,面齿轮的内径减小,外径、径向有效齿宽均增大;当增大坐标系位置参数,面齿轮的内径、外径均增大,径向有效齿宽减小。      

A quantum inspired genetic algorithm for multimodal optimization of wind disturbance alleviation flight control system

This paper develops a Quantum-inspired Genetic Algorithm (QGA) to find the sets of optimal parameters for the wind disturbance alleviation Flight Control System (FCS). To search the problem domain more evenly and uniformly, the lattice rule based stratification method is used to create new chromosomes. The chromosomes are coded and updated according to quantum-inspired strategies. A niching method is used to ensure every chromosome can converge to its corresponding local minimum in the optimization process. A parallel archive system is adopted to monitor the chromosomes on-line and save all potential feasible solutions in the optimization process. An adaptive search strategy is used to gradually adjust the search domain of each niche to finally approach the local minima. The solutions found by the QGA are compared with some other Multimodal Optimization (MO) algorithms and are tested on the FCS of the Boeing 747 to demonstrate the effectiveness of the proposed algorithm.     

大涵道比风扇设计技术发展趋势

风扇部件是民用涡扇发动机关键部件之一,自20世纪60年代以来在气动设计等方面发生了显著变化,其发展支撑了民机的更新换代。对民机风扇叶片的发展历史进行了回顾,对典型设计特征和参数进行了总结。着重介绍了民机风扇叶片的叶片数、叶尖切线速度、气动叶型设计、降噪设计、材料工艺等发展变化,对其内在原因进行了分析,并评述了其发展趋势。     

Experimental characteristics of oblique shock train upstream propagation

The structure and dynamics of an oblique shock train in a duct model are investigated experimentally in a hypersonic wind tunnel. Measurements of the pressure distribution in front of and across the oblique shock train have been taken and the dynamics of upstream propagation of the oblique shock train have been analyzed from the synchronized schlieren imaging with the dynamic pressure measurements. The formation and propagation of the oblique shock train are ini-tiated by the throttling device at the downstream end of the duct model. Multiple reflected shocks, expansion fans and separated flow bubbles exist in the unthrottled flow, causing three adverse-pressure-gradient phases and three favorable-pressure-gradient phases upstream the oblique shock train. The leading edge of the oblique shock train propagates upstream, and translates to be asym-metric with the increase of backpressure. The upstream propagation rate of the oblique shock train increases rapidly when the leading edge of the oblique shock train encounters the separation bubble near the shock reflection point and the adverse-pressure-gradient phase, while the oblique shock train slow movement when the leading edge of the oblique shock train is in the favorable-pressure-gradient phase for unthrottled flow. The asymmetric flow pattern and oscillatory nature of the oblique shock train are observed throughout the whole upstream propagation process.     

Developing an engineering-statistical model for estimating aerodynamic coeffcients of helicopter fuselage

The design of the geometric shape of a helicopter fuselage poses a serious challenge for designers. The most important parameter in determining the shape of the helicopter fuselage is its aerodynamic coefficients. These coefficients are determined using two methods:wind tunnel test and computational fluid dynamics (CFD) simulation. The first method is expensive, time-consuming and limited. In addition, estimates in regions away from data can be poor. The second method, due to the limitations of numerical solution, the number of nodes and the used solution, is often inaccurate. In this paper, with the aim of accelerating the design process and achieving results with reasonable engineering accuracy, an engineering-statistical model which is useful for estimating the aerodynamic coefficients was developed, which mitigated the drawbacks of these two methods. First, by combining CFD simulation and regression techniques, an engineering model was pre-sented for the estimation of aerodynamic coefficients. Then, by using the data from a wind tunnel test and implementation of statistical adjustment, the engineering model was modified and an engineering-statistical model was obtained. By spending less time and cost, the final model provided the aerodynamic coefficients of a helicopter fuselage at the desired angles of attack with reasonable accuracy. Finally, three numerical examples were provided to illustrate the application of the pro-posed model. Comparative results demonstrate the effectiveness of the engineering-statistical model in estimating the aerodynamic coefficients of a helicopter fuselage.     

复杂电磁环境下雷达目标距离像识别效果评估

分析了战场电磁环境复杂性及其对雷达目标高分辨距离像特征提取和目标识别影响,分别以距离像失真和识别率为度量标准,通过对比特征提取和目标识别效果,提出了一种复杂电磁环境下雷达目标距离像识别效能评估方法,并进行了仿真计算。     

高超声速乘波飞行器气动特性研究

用计算流体力学和风洞试验的方法对以锥导乘波体为基础生成的高超声速乘波飞行器的气动性能进行了研究。结果表明，以马赫数6，攻角4度为设计状态的乘波体，在马赫数5～7，攻角4～6度的范围内，都具有良好的气动特性，升阻比接近4。最后，提出了一个简单的以参考温度方法为基础的粘性阻力分析方法。该方法配合使用风洞试验和计算流体的结果，可以用来验证计算流体中难以计算准确的粘性阻力，也可以用来分析在风洞试验难以直接得到的粘性阻力。对于工程上的粘性阻力分析是一个有用的办法。     

空空导弹综合环境可靠性试验剖面研究

为有效地进行空空导弹综合环境可靠性试验，根据试验剖面真实性、合理性和典型性的要求，确定导弹挂飞为主要试验阶段。研究了地面和空中两种试验环境中温度应力、振动应力、电应力和湿度等环境参数的确定，并给出了相应的原则或计算公式。最后讨论了试验剖面设计中循环及小周期确定、采用多个试验剖面等其他问题。