Signatures of the Sudden Stratospheric Warming events of January–February 2008 in Seoul,S. Korea

The period January–February 2008 was characterized by four Sudden Stratospheric Warmings (SSWs) in the Northern Hemisphere, of which the last warming, at the end of February 2008, was a major warming. A significant decrease in mesospheric water vapour (H₂O) of more than 2 ppmv (∼40%) was observed by the ground-based microwave (GBMW) radiometer in Seoul, S. Korea [37.3°N, 126.3°E] during the major SSW. A comparison with ground-based mesospheric H₂O observations from the mid-latitude station in Bern [46.9°N, 7°E] revealed an anticorrelation in the mesospheric H₂O data during the major SSW. In addition, prior to the major warming, strong periodic fluctuations were recorded in the Aura MLS vertical temperature distribution between 15 and 0.05 hPa at Seoul. The mesospheric temperature oscillation was found to have a period of ∼10–14 days with a persistency of 3–4 cycles.     

The impact of microwave absorber and radome geometries on GNSS measurements of station coordinates and atmospheric water vapour

We have used microwave absorbing material in different geometries around ground-based Global Navigation Satellite System (GNSS) antennas in order to mitigate multipath effects on the estimates of station coordinates and atmospheric water vapour. The influence of a hemispheric radome – of the same type as in the Swedish GPS network SWEPOS – was also investigated. Two GNSS stations at the Onsala Space Observatory were used forming a 12 m baseline. GPS data from October 2008 to November 2009 were analyzed by the GIPSY/OASIS II software using the Precise Point Positioning (PPP) processing strategy for five different elevation cutoff angles from 5° to 25°. We found that the use of the absorbing material decreases the offset in the estimated vertical component of the baseline from ∼27 mm to ∼4 mm when the elevation cutoff angle varies from 5° to 20°. The horizontal components are much less affected. The corresponding offset in the estimates of the atmospheric Integrated Water Vapour (IWV) decreases from ∼1.6 kg/m² to ∼0.3 kg/m². Changes less than 5 mm in the offsets in the vertical component of the baseline are seen for all five elevation cutoff angle solutions when the antenna was covered by a hemispheric radome. Using the radome affects the IWV estimates less than 0.4 kg/m² for all different solutions. IWV comparisons between a Water Vapour Radiometer (WVR) and the GPS data give consistent results.     

液压传动系统综合污染分析与控制方法研究

详细分析了工作油液中的固体颗粒、水、气、氯污染物的特征及其对系统的影响.通过多年污染控制实践,以及在汲取国内外先进的污染控制技术的基础上,阐述了各种污染物的控制方法及测试技术,提出了全面污染控制的设想.     

固体发动机φ200mm带喷管整体缠绕壳体的研制

研制了３台φ２００ｍｍ带喷管不等开口整体缠绕壳休交验了带喷管体整体结构强度，所测壳体的实际爆破压强为１１．６－１３．０ＭＰａ，是设计爆破压强的１．４－１．６倍。     

凝结水回收的节能效益及技术问题

通过对凝结水及其余热回收的经济效益分析,提出了凝结水回收具有重要的节能作用,并从技术上阐述了凝结水回收的方法及技术措施,以便在实际设计、施工中给予重视。     

One-week habitation of two humans in an airtight facility with two goats and 23 crops – Analysis of carbon,oxygen, and water circulation

Human habitation and animal holding experiments in a closed environment, the Closed Ecology Experiment Facilities (CEEF), were carried out. The CEEF were established for collecting experimental data to estimate carbon transfer in the ecosystem around Rokkasho nuclear fuel reprocessing plant. Circulation of O₂ and CO₂, and supply of food from crops cultivated in the CEEF were conducted for the first time in the habitation experiments. Two humans known as eco-nauts inhabited the CEEF, living and working in the Plant Module (PM) and the Animal and Habitation Module (AHM), for a week three times in 2005. On a fresh weight basis, 82% of their food was supplied from 23 crops including rice and soybean, cultivated and harvested in the PM, in the 2nd and 3rd experiments. For the goats, the animals held in the experiments, all of their feed, consisting of rice straw, soybean plant leaves, and peanut shells and peanut plant leaves, was produced in the PM in the 2nd and 3rd experiments. The O₂ produced in the PM by photosynthesis of the crops was separated by the O₂ separator using molecular sheaves, then accumulated, transferred, and supplied to the AHM atmosphere. The CO₂ produced in the AHM by respiration of the humans and animals was separated by the CO₂ separator using solid amine, then accumulated, transferred, and supplied to the PM atmosphere. The amount of O₂ consumed in the AHM was 46–51% of that produced in the PM, and the amount of CO₂ produced in the AHM was 43–56% of that consumed in the PM. The surplus of O₂ and the shortage of CO₂ was a result of the fact that waste of the goats and the crops and part of the human waste were not processed in these habitation experiments. The estimated amount of carbon ingested by the eco-nauts was 64–92% of that in the harvested edible part of the crops. The estimated amount of carbon ingested by the goats was 36–53% of that in the harvested inedible part of the crops. One week was not enough time for determination of gas exchange especially for humans and animals, because fluctuation of their gas exchange was quite high. The amount of transpired water collected as condensate was 818–938 L d⁻¹, and it was recycled as replenishing water compensating transpiration loss of nutrient solution. The amount of waste nutrient solution discharged from the PM was 1421–1644 L d⁻¹. The waste nutrient solutions from rice and other crops were processed through micro filters (MFs) separately. The MF filtrated solutions were processed with reverse osmosis (RO) membrane filter separately and divided into filtrated water and concentrated waste nutrient solution. The concentrated waste nutrient solution from the crops other than rice was processed through an ultra-micro filter (UF) and reused, although that from rice was discharged in 2005. Concentrations of nutritional ions in the UF filtrated solution were determined, the depleted ions were added back, the UF filtrated solution was diluted with the RO membrane filtrated water, and the nutrient solution for the crops other than rice was regenerated. The nutrient solution for rice was newly made each time, using concentrated solution from an external source and the RO membrane filtrated water. Average amounts of water used in the AHM (L d⁻¹) were determined as follows: drinking by humans (filtrated water), 1.5; cooking, etc. (filtrated water other than for drinking), 14.3; drinking by goats, 3.8; showering (hot water), 13.2; showering (cold water), 0.1; washing of hand and face and brushing teeth, 4.1; washing of dishes, dish clothes and towels, 36.4; and washing of animal holding tools, 0.3. The waste water was processed by a RO purification system and recycled for toilet flushing and animal pens washing. A circulation experiment for water was started in 2006 and a circulation experiment for waste materials is planned for 2007. In 2006, a single duration of the air circulation experiments was 2 weeks, although the human habitants were changed after 1 week.     

电弧喷涂参数优化及涂层磨损性能试验研究

采用正交设计方法和通过极差分析研究了电弧喷涂工艺参数对CFB锅炉水冷壁涂层耐磨性的影响。结果表明,影响涂层性能的工艺参数主要是电弧电流,其次是喷涂距离,而电弧电压和雾化空气压力的影响很小。通过涂层冲蚀磨损性能试验,进一步验证了用此最佳喷涂工艺参数组合可以获得良好耐磨性能的涂层。     

空间发动机系统关机过程水击现象理论分析

对空间发动机系统关机过程进行了数值仿真分析,讨论了关机过程中系统管路内的水击现象,以及多推力室发动机系统工作状态、阀门响应特性等因素对水击现象的影响。     

姿控推进系统发动机关机的管路瞬变特性

从一维液体瞬变管路方程出发，采用有限差分格式的特征线方法，针对某姿控推进系统发动机真实氧化剂管路的关机瞬变特性进行了数值研究，对系统不同部位的动态特性进行了计算，喷注前的最大瞬变压力达到储箱压力的3倍，得到的结果与试车数据是一致的，对液体发动机管路工程设计具有参考价值，表明该方法可以方便地对包括许多管路，阀门和推力室的复杂系统进行动态特性分析。     

TBCC发动机涡轮进气道喷水冷却特性数值研究

对涡轮基组合循环(Turbine Based Combined Cycle, TBCC)发动机涡轮进气道进行喷水冷却是解决TBCC发动机推力不连续问题的有效方式之一。本文基于实际流场条件选取某型TBCC发动机涡轮进气道结构,对进气道内喷水冷却特性进行了数值仿真,研究飞行器不同工况下水滴的蒸发特性及喷水对来流高温空气的预冷效果。结果表明,来流空气温度降幅随水气比提高而增大,最高温降可达152.4K。水气比提高后水滴蒸发率逐渐降低,但蒸发总量仍会继续上升。相同水气比条件下,飞行马赫数越高,喷水冷却效果越明显。在Ma3.5飞行速度和水气比0.03条件下有最高蒸发率,达83.05%。喷水冷却有效扩展了涡轮模态飞行马赫数,最高能使飞行速度提升至Ma2.84,即喷水冷却扩展了TBCC从涡轮模态向超燃冲压模态转换的衔接速域。