金属水反应水冲压发动机系统性能估算

使用金属／水反应燃料是推进水下超高速航行器的最佳途径，分析了单次注水和二次注水的铝／水反应燃料水冲压发动机系统，得出了燃料质量配比、燃烧室温度、燃烧室压强、系统有效推力、效率等关键技术性能指标。指出了二次注水系统的优越性并提出了一种二次注水系统的实施方案。分析结论与实际系统性能指标相吻合，证明了分析的正确性，可以为系统研究提供参考。     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

A simple control law for reducing the effective characteristic acceleration of a solar sail

The direction and magnitude of a solar sail acceleration are strongly related. For this reason, once the characteristic acceleration has been fixed, it is not possible to modulate the acceleration in a particular direction. In this work, a semi-analytical switching control law is derived, enabling a solar sail to emulate a smaller effective characteristic acceleration (without changes in geometry or optical properties); by periodically changing the pitch (cone) angle of the sail, in average over time, the acceleration produced by the sail matches exactly (in both direction and magnitude) that of a “smaller” sail. The range in which this is possible is determined, and the limitations on this range due to the size difference is computed. The method is validated on optimal Earth-Mars trajectories.     

OSIRIS-REx low-velocity particles during outbound cruise

We analyzed high-angular rate streaks first recorded by OSIRIS-REx’s MapCam during a 2017 search for Earth Trojan asteroids. We interpret them as water-ice particles that translated across the imager’s field of view, originating from the spacecraft itself. Their translation velocities approximated 0.1–1?m/s based on reasonable conclusions about their range. Pursuing several lines of investigation to seek a coherent hypothesis, we conclude that the episodic releases of the water ice particles are associated with spacecraft attitudes that resulted in solar illumination of previously shadowed regions. This correlation suggests that the OSIRIS-REx spacecraft itself possesses micro-climatic zones consisting of hot regions and cold traps that may temporarily potentially pass volatiles back and forth before losing most of them.     

Wrinkling analysis for small solar-photon sails: An experimental and analytic approach for trajectory design

A good model of solar-radiation pressure induced thrust is one of the key points in sailcraft trajectory design. The sail membrane’s local topographic deformations, i.e. wrinkles and creases, are among the main aspects that such a model should include. We have analyzed the influence of wrinkles/creases, as a whole, by measuring the related deformations on small samples of sail membrane, 2.5?μm thick, consisting of CP1 and physical-vapor-deposition Aluminum. Experimental outcomes from our laboratory facility have been processed, statistically investigated, and inserted into the lightness vector formalism. We have used such formalism for accurate sailcraft trajectory computation via a non-ideal reflection sail thrust model. Finally, we computed the deviations of wrinkled-sail sailcraft final orbital states with respect to the no-wrinkle sail final orbital ones for a circular to circular 2D inward transfer. The radii of the orbits are 1?AU and the semi-major axis of Mercury, respectively. It appears that sail wrinkles and creases are no longer negligible in the sailcraft trajectory design.     

MIDACO software performance on interplanetary trajectory benchmarks

A numerical study of the MIDACO optimization software on the well known GTOP benchmark set, published by the European Space Agency (ESA), is presented. The GTOP database provides trajectory models of real-world interplanetary space missions such as Cassini, Messenger or Rosetta. The trajectory models are formulated as constrained nonlinear optimization problems and are known to be difficult to solve.     

基于计划到达时刻的四维航迹规划

为了加速空管自动化与智能化技术的应用与实施,提出了水平航迹与高度/速度剖面分阶段设计的四维航迹规划方法。基于动态时间规整与层次聚类方法实现历史雷达航迹聚类分析,完成水平航迹设计。建立速度剖面规划模型,通过航迹生成器与速度调整器交互协作,精细化控制进场时间,以满足计划到达时间要求。以上海浦东国际机场PINOT进场航班为例实施验证,结果表明,四维航迹规划方法可有效实现航班的计划到达时间,从而减少航班延误,提高终端空域运行效率。     

基于雷达航迹的航空器质量估算

为保障基于轨迹运行的顺利实施,必须提高四维航迹预测的精度,而四维航迹的精准预测依赖于航空器质量准确估算。鉴于此,构建并分析了航空器能量模型;基于雷达航迹与航空器基础资料( BADA),提出了新型的航空器质量估算方法与步骤;利用最小二乘算法求解了航空器质量的估计值;分别基于预测航迹、雷达轨迹与QAR数据,采用相对误差作为评价指标,实施验证与分析。验证结果表明,提出的方法可将航空器质量估算误差控制在5%以内,从而能够有效地提高航迹预测精度。     

Water takeoff performance calculation method for amphibious aircraft based on digital virtual flight

Owing to the strong coupling among the hydrodynamic forces, aerodynamic forces and motion of amphibious aircraft during the water takeoff process, the water takeoff performance is difficult to calculate accurately and quickly. Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls, a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff. A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle, flight velocity and other parameters during water takeoff. Combined with the aerodynamic model, engine thrust model and aircraft motion model, a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff, and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight. Typical performance indicators, such as the liftoff time and liftoff distance, can be obtained via digital virtual flight calculations. A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%, which verifies the correctness and accuracy of the proposed method. This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes, and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.     

空射导弹发射初始弹道数值仿真

导弹从载机上发射时,载机对导弹的流场存在干扰,从而影响导弹在发射初始阶段的姿态和运动轨迹。为了确定导弹的初始弹道参数,本文利用CFD商业软件Fluent6.1计算导弹发射时的非定常流场,并通过该软件的接口嵌入导弹的六自由度弹道方程,同时计算了导弹在载机流场干扰下的非定常气动力和初始弹道。计算结果清晰地表现出导弹与载机的分离过程和载机流场的干扰形式,并可估算出载机的流场干扰范围。