多飞行器动态目标追踪协同控制研究

多飞行器追踪动态目标是一个协同控制问题,需要根据目标飞行状态,协同各个追踪飞行器的飞行状态,最终能够在某动态的最佳点实现同时到达。考虑到目标具有较强的机动性,轨迹通常为非线性的,设计了一种基于非线性轨迹预测的、以剩余时间为控制变量的一致性控制方案。仿真结果表明,提出的控制方案能够实现空间位置相距较远的多飞行器动态追踪,具有较好的灵活性和收敛性,目标轨迹的预测结果与实际轨迹误差较小,恰当的轨迹估计有助于缩短追踪时间,提高追踪效率。     

高超声速飞行器再入轨迹多目标优化

针对飞行器再入轨迹多目标优化问题,提出了一种基于粒子群算法与层次分析法的综合求解策略。首先,根据飞行器的动力学模型以及再入约束条件,建立了飞行器多目标优化模型;然后,考虑到粒子群算法只能求解无约束单目标问题,采用罚函数处理飞行过程中的约束条件和优化目标;最后,针对不同约束及目标的权重对再入轨迹的影响,利用层次分析法建立包含主观评估信息的优化模型,采用粒子群算法优化求解满足相应约束条件的再入轨迹问题。仿真结果表明,该方法所生成的优化轨迹具有较高的精度和计算效率,并对设计者的主观需求有良好的体现。     

基于NFTET的高超声速飞行器鲁棒轨迹重构设计

考虑高超声速飞行器故障下安全再入飞行问题,针对飞行器发生较大故障的情况,提出了基于相邻可行轨迹存在定理(Neighboring feasible trajectory existence theorem,NFTET)的鲁棒在线轨迹重构算法。在标称情况下基于反馈线性化预测校正制导算法生成满足各种约束条件的再入轨迹;由于NFTET只适用于发生较小故障的情况,为保证较大故障下飞行器仍能以较高精度安全着陆,基于NFTET理论设计了鲁棒轨迹重构算法,得到了较高落点精度的飞行轨迹。仿真结果表明,本文所提出算法能有效解决飞行器较大故障下的安全再入轨迹重构问题,提高了飞行器的自主容错能力。     

基于序列近似优化算法的固体运载火箭弹道设计

采用打靶法研究固体运载火箭弹道优化设计问题。针对打靶法中智能优化算法效率、优化问题中约束条件提法等方面的不足,引入序列近似优化算法,提出算法中径向基函数高斯核宽度的高效确定方法。数值仿真实验表明,提出的方法可在基本不带来计算量增加的前提下,显著提高代理模型精度,使序列近似优化算法得到改进,提高优化效率。设计固体运载火箭飞行程序。建立弹道优化设计问题数学模型,并将模型中相关等式约束合理转化为不等式约束,降低优化问题求解难度;基于改进后的序列近似优化算法完成某固体运载火箭弹道优化,原始计算模型调用308次之后便搜索到最优解,较传统智能优化算法显著提高了优化效率,优化方案末助推级液体推进剂消耗比原方案减少25.7%。     

永磁约束电子束轨迹实验研究

通过设计并运用一种直流电子束轨迹简易测量方法,开展了永磁约束电子束轨迹实验研究,得到了永磁铁环对60~80 ke V电子束约束作用的实验数据。结果表明:该测量方法方便有效,结果较为准确;永磁铁对电子束聚焦作用明显,并呈现出一定的规律性。对永磁铁约束电子束研究工作奠定了基础。     

再入轨迹多约束模型预测静态凸规划方法

针对大升阻比可重复使用飞行器再入滑翔轨迹规划问题,提出了一种基于自适应分段Chebychev伪谱离散的多约束模型预测静态凸规划算法(P-CMPCP),实现了全量终端状态约束及多过程约束作用下再入轨迹的高精度迭代解算。考虑倾侧角翻转导致控制量不连续,传统规划方法难以同时严格满足终端位置、角度约束,且过程约束易超限,采用自适应分段伪谱离散策略,构建全程飞行状态及过程性能指标约束对各配点处控制调整量的敏感度关系,从而将非线性最优控制问题转化为静态凸规划问题,并利用内点法对各分段控制量进行了协调优化。本文所提方法无需对动力学模型进行简化或近似处理,即能以少量积分运算使轨迹满足再入全量模型约束,且控制量平滑,数值精度优于传统规划方法。     

一种扩展的比例导引规律及其弹道方程的构建

在传统的动力学微分方程的基础上提出了一种扩展的比例导引法 ,并给出了该导引规律下的相对弹道方程。文中的推理过程表明 ,这种导引规律对导弹、目标的运动速度几乎没有限制 ,理论上说明运用该制导规律的导弹将能对付高机动大速度目标 ,其弹道方程的建立 ,使得研究该制导规律下的弹道特性成为可能。     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

Hybrid optimization for multiple-impulse reconfiguration trajectories of satellite formation flying

A hybrid optimization method is developed for fuel-optimal reconfigurations of a group of satellites flying in formation. The genetic algorithm performs a global search to find two-impulse trajectories, and primer vector analysis finds multiple-impulsive local optimal trajectories with the two-impulse trajectories as initial guesses. Hybrid optimization finds globally optimal trajectories for formation reconfigurations, including formation resizing, reassignment and reorientation maneuvers. Multiple-impulse trajectories reduce the fuel consumption from the two-impulse trajectories by up to 4.4% for those maneuvers. In real missions, satellites can follow two-impulse trajectories to gain the advantage of a smaller number of impulses, with the cost of slightly more propellant. The qualitative characteristics of the optimal trajectories are analyzed from the number of optimal trajectories found by hybrid optimization.     

3-D position estimation of isolated target and optimal trajectory choice in parasitic synthetic aperture radar

Bistatic SAR (BSAR) systems have recently been the subject of several studies, but little attention has been given to the potential of the location of targets. In the paper, the performance of the estimation of 3-D position of a target (TPE) in parasitic SAR is obtained analytically and illustrated by computer simulation using ambiguity function analysis, and the maximum likelihood estimate (MLE) approach. It was shown that by using a multi look parasitic BSAR all three coordinates of an isolated point target (IPT) could be evaluated. Analytical closed form equations that characterize the measurement accuracy were derived. In the final these equations will be used to demonstrate various cases of more practical, including optimal trajectories choice under any geometry configuration case, moreover, the conclusion is verified via Matlab.