燃烧室头部进气规律对煤粉燃烧效率的影响

用实验方法研究了火焰筒式煤粉燃烧室头部进气规律对燃烧效率的影响。通过对6种结构的头部配气方案的分析比较,得出了煤粉燃烧室合理的头部配气方案,为今后煤粉燃烧室的设计和工作状态的选择提供了重要的实验依据。     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

OSIRIS-REx low-velocity particles during outbound cruise

We analyzed high-angular rate streaks first recorded by OSIRIS-REx’s MapCam during a 2017 search for Earth Trojan asteroids. We interpret them as water-ice particles that translated across the imager’s field of view, originating from the spacecraft itself. Their translation velocities approximated 0.1–1?m/s based on reasonable conclusions about their range. Pursuing several lines of investigation to seek a coherent hypothesis, we conclude that the episodic releases of the water ice particles are associated with spacecraft attitudes that resulted in solar illumination of previously shadowed regions. This correlation suggests that the OSIRIS-REx spacecraft itself possesses micro-climatic zones consisting of hot regions and cold traps that may temporarily potentially pass volatiles back and forth before losing most of them.     

基于ALE法的水陆两栖飞机船体着水性能分析

水陆两栖飞机的着水性能是体现其综合性能的重要因素之一.应用ALE法对三种水陆两栖飞机船体截面进行入水仿真计算,从着水载荷、喷溅性能及运动响应三个方面对着水性能进行综合评估.对比分析了直线型、带舭弯弧形、复合型三种构型截面在不同速度、不同重量下的压力分布、喷溅性能以及运动响应,得到了三种截面横向压力分布规律.计算结果显示相同状态下,喷溅性能复合型优于带舭弯弧形、带舭弯弧形优于直线型;过载复合型远大于带舭弯弧形,带舭弯弧形稍大于直线型,综合看来带舭弯弧形截面着水性能最佳.     

Water takeoff performance calculation method for amphibious aircraft based on digital virtual flight

Owing to the strong coupling among the hydrodynamic forces, aerodynamic forces and motion of amphibious aircraft during the water takeoff process, the water takeoff performance is difficult to calculate accurately and quickly. Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls, a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff. A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle, flight velocity and other parameters during water takeoff. Combined with the aerodynamic model, engine thrust model and aircraft motion model, a digital virtual flight simulation model is developed for amphibious aircraft during water takeoff, and a calculation method for the water takeoff performance of amphibious aircraft is proposed based on digital virtual flight. Typical performance indicators, such as the liftoff time and liftoff distance, can be obtained via digital virtual flight calculations. A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%, which verifies the correctness and accuracy of the proposed method. This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes, and the relevant calculation results can also provide a theoretical reference for the formulation of flight test plans for airworthiness certification.     

水冲压发动机的热力性能分析

针对水冲压发动机这一新型动力系统,详细分析了其工作过程,并建立了相应的热力计算模型。结合质量守恒方程、化学平衡方程和能量守恒方程建立了发动机热力计算理论,预估了发动机的性能,初步设定了燃烧室的工作压力,并分析了比冲、推力以及特征速度等性能参数随进水量的定性变化规律。综合考虑发动机性能及燃烧反应的启动温度,得出一次进水水燃比限定在0.5~1.9之间,总水燃比的上限为5.1,而水燃比为3.5时对应着最高比冲。     

水冲压发动机的热力循环性能预示

针对采用二次进水机制的水冲压发动机,基于特殊的工作方式初步建立了相应的热力循环模型,进而在不同的发动机工况下分析了循环热效率性能。选定水反应金属燃料基础配方为Mg/AP/HTPB的混合物,在不同组分配方条件下,相应发动机热力循环效率随各影响参数的变化规律一致,均随燃烧室压强和水反应金属燃料中金属含量的增加而呈增加趋势,相反,水燃比的增加会引起热效率的降低。特别地,给定一合理水燃比3.0,保持燃烧室压强和航行器航深分别为2.5 MPa和10 m,50%和60%镁含量的水反应金属燃料对应发动机的循环热效率分别为37.78%和44.38%,初步验证了基于联合循环的水冲压发动机良好的循环性能。     

能量密度对水工质激光推进性能的影响

当辐照激光能量密度不是很高时,在分析水工质激光推进基本物理过程的基础上,只考虑汽化过程对冲量形成过程的贡献,用一维理论模型研究了辐照激光能量密度对冲量耦合系数、比冲、能量转化效率等推进性能参数的影响规律。结果表明,随着辐照激光能量密度的增加,存在一个获得最大冲量耦合系数的最优能量密度;比冲随着能量密度的增加而变大;对于透射率一定的工质而言,随着能量密度增大,能量转化效率趋于一个恒定值。这一理论研究结果对下一步的实验研究工作具有较好的指导意义。     

用于复杂形状复合材料制造的水溶性芯模材料

提出了一种能够用于树脂基复合材料成型用的水溶性型芯模材料,该材料既能满足树脂基复合材料成型时的温度要求,又能在复合材料成型完成后进行水溶脱除.主要研究了水溶性型芯模材料的组成、制备工艺与耐温性、易脱除等相关性能,并对水溶性芯模材料的水溶性作了评价和表征.     

飞机机头附近液态水含量分布规律的数值研究

在飞行器飞行过程中,安装在机头上的各类传感器结冰会对飞机的飞行安全产生不利影响。而液态水含量是影响飞机结冰的重要参数,为了更好地进行传感器结构及布局设计,对机头附近液态水含量分布规律进行数值研究。采用计算流体力学方法对飞机飞行时的空气-过冷水滴的稀疏两相流场进行数值模拟,通过求解N-S方程获得空气流场,采用欧拉法求解水滴运动场得到水滴运动轨迹。分析在不同来流马赫数、来流迎角及液滴直径等条件下,机头关键截面上广义水滴遮蔽高度的变化及机头关键位置上液态水含量的变化规律,研究不同状态参数对液态水含量分布的影响。结果表明:水滴遮蔽高度及浓度增加区范围随马赫数增大而增加,迎角的变化对机头上下表面液态水含量分布产生相反的影响。