基于虚拟仪器的阳极化电压控制器校准装置

本文介绍了基于虚拟仪器技术开发的阳极化电压控制器校准装置,对系统软件和硬件进行了分析,利用该校准装置能够实现对阳极化电压控制器的校准,满足飞机铝合金零部件阳极化表面处理的工艺规范要求。     

基于大型制造虚拟数字工装测量平台应用研究

分析了某大型特种部件制造过程中产生的难点,基于激光跟踪数字测量定位技术,论述了虚拟数字工装测量平台的设计原理,结合实例详细阐释了测量平台在大型特种部件制造过程中的应用,采取坐标数组控制方法,解决了制造过程难点。经实践验证,该测量平台能有效辅助大型特种部件制造并有效控制质量。     

HW/SW Co-design of the Instrument Control Unit for the Energetic Particle Detector on-board Solar Orbiter

ESA’s medium-class Solar Orbiter mission is conceived to perform a close-up study of our Sun and its inner heliosphere to better understand the behaviour of our star. The mission will provide the clues to discover how the Sun creates and controls the solar wind and thereby affects the environments of all the planets. The spacecraft is equipped with a comprehensive suite of instruments. The Energetic Particle Detector (EPD) is one of the in-situ instruments on-board Solar Orbiter. EPD is composed of five different sensors, all of them sharing the Instrument Control Unit or ICU that is the sole interface with the spacecraft. This paper emphasises on how the hardware/software co-design approach can lead to a decrease in software complexity and highlights the versatility of the toolset that supports the development process. Following a model-driven engineering approach, these tools are capable of generating the high-level code of the software application, as well as of facilitating its configuration control and its deployment on the hardware platforms used in the different stages of the development process. Moreover, the use of the Leon2ViP virtual platform, with fault injection capabilities, allows an early software-before-hardware verification and validation and also a hardware–software co-simulation. The adopted solutions reduce development time without compromising the whole process reliability that is essential to the EPD success.     

基于CAN总线的虚拟化以太网接口设计和实现

针对卫星载荷间基于控制器局域网（CAN）总线的IP通信,提出了一种CAN接口虚拟化机制,称为IPoverCAN。通过IP地址和CAN地址映射、IP报文分片/重组和多路缓冲队列管理等机制,将CAN接口抽象为虚拟的标准以太网接口。试验结果表明,IPoverCAN机制实现了CAN数据帧和IP报文之间的实时高效转换,可用于卫星载荷间通信等对设备质量和体积敏感的领域。     

微波复合调制信号校准系统研究

微波复合调制信号校准系统是导弹制导专测设备的校准设备,主要用于确认导弹制导系统技术性能,使其能够满足规定的技术指标,保证其处于良好的技术状态。过去多采用人工手动操作、分散拆卸的校准方法,不仅耗时费力,校准的准确度也难以保证。目前模拟信号的解调普遍采用硬件实现,尝试将模拟信号采用一定的算法解调并根据解调的原基带信号测量相关参数,实现解调测量软件化。     

模块化柔性钣金零件切割夹具设计

通过对模块化柔性工装现状和钣金零件的工艺分析,结合钣金零件曲面复杂、易变形等特点,提出了一种用于钣金零件切割用的柔性夹具。利用一种具有定位功能随动负压吸盘的点阵分布,对钣金零件在标准夹具上进行6点定位和超6点定位。同时对柔性标准夹具进行模块化组合,满足不同尺寸钣金零件的装夹要求,解决了飞机和汽车生产中钣金零件制造的瓶颈。     

计测仪器与模拟仿真技术

综述了计测仪器的技术特点、计测仪器与模拟仿真技术及其发展趋势。     

Changing law of launching pitching angular velocity of rotating missile

In order to provide accurate launching pitching angular velocity（LPAV） for the exterior trajectory optimization design, multi-flexible body dynamics（MFBD） technology is presented to study the changing law of LPAV of the rotating missile based on spiral guideway. An MFBD virtual prototype model of the rotating missile launching system is built using multi-body dynamics modeling technology based on the built flexible body models of key components and the special force model.The built model is verified with the frequency spectrum analysis. With the flexible body contact theory and nonlinear theory of MFBD technology, the research is conducted on the influence of a series of factors on LPAV, such as launching angle change, clearance between launching canister and missile,thrust change, thrust eccentricity and mass eccentricity, etc. Through this research, some useful values of the key design parameters which are difficult to be measured in physical tests are obtained. Finally,a simplified mathematical model of the changing law of LPAV is presented through fitting virtual test results using the linear regression method and verified by physical flight tests. The research results have important significance for the exterior trajectory optimization design.     

基于虚拟合成仪器的武器系统电参数测量技术研究

针对部队装备维护使用的某型引俄防空装备配套测试设备存在的诸多问题,在交流分析的基础上,确定某型装备8种随装测量仪器仪表的技战指标,利用广泛使用的仪器仪表和现有的成熟技术,研制硬件系统和编制软件,最大限度进行仪器合成,研制出小型化、多功能、一体化的便携式测试设备.使用结果表明,能有效保证装备的正常维护,提高部队和工厂的装...     

基于多目标遗传算法的三轴振动夹具结构参数优化设计分析

通过建立三轴振动夹具优化设计数学模型,以影响夹具性能的结构尺寸为设计变量,以振动台尺寸约束和夹具质量要求为约束条件,采用SolidWorks和ANSYS Workbench协同仿真技术,基于多目标遗传算法实现了振动夹具的轻量化和一阶固有频率最大化。优化后的三轴振动夹具一阶固有频率提高了7.4%,同时夹具的质量减小了20.1%,证明文章所提出的协同仿真技术手段与优化设计方法可行、有效,可为其他同类产品的优化设计提供参考。