环路热管地面实验平台的热设计

文章旨在建立环路热管的地面实验平台,模拟环路热管在太空轨道运行的热环境。首先建立了地面实验舱的物理模型,对其如何实现在地面模拟太空中该环路热管的热环境进行了热分析计算,其次确定了满足环路热管轨道运行最冷工况和最热工况下的实验舱的壁面温度,最后对实现该轨道环境所需要的壁面绝热材料、制冷剂、制冷设备进行了选择,初步完成了实验平台的热设计。计算结果表明,在同时考虑舱内对流和辐射换热的条件下,要实现空间热边界条件,实验舱内舱的壁温要保证在-62.1~-10.9℃之间变化。     

缘板摩擦阻尼器的减振实验研究

对叶轮机叶片缘板金属摩擦阻尼器进行了实验研究。着重研究了摩擦阻尼器对叶片的一阶弯曲振型的影响。研究表明,利用金属摩擦阻尼器可以有效地降低叶片的振动;通过合理选择阻尼器的质量(即正压力),可以最大限度地降低叶片的弯曲振动应力,即存在一最优正压力;并且随着激振力的增加,这一最优正压力也将随之增加。因此,它是叶轮机械中一种非常简单有效的减振措施。      

导弹命中精度评定中贝叶斯方法的应用

针对导弹武器系统试验评定的问题 ,研究了如何在命中精度评定中应用贝叶斯方法。在导弹落点偏差分布为正态 -逆伽马分布的假设下 ,提出以贝叶斯理论为基础 ,利用实际的导弹飞行试验状态信息和试验前的各种已知信息 ,加入弹道的模拟和仿真方法 ,获得评定的验前分布参数 ,使精度评定理论与实际情况相结合的方案。该方案以使用方提出的可信度和最低可信下界为检验精度的指标 ,同时也提出一种运用参数自助 (Bootstrap)方法获得验前分布参数的方法。最后 ,提供了完整的评定流程和说明 ,使实际的评定工作有一个较完整的体系。所提的贝叶斯方法尤其适合于小子样场合下的试验鉴定工作     

风洞模拟建筑物对大气污染物扩散影响的若干问题讨论

通过相似性分析,得到了大气污染建筑物影响风洞试验应满足的基本相似条件.由一个实例研究了利用常规风洞模拟装置和测试仪器进行大气污染建筑物影响风洞试验在技术上的可行性.结果显示:由于模拟装置和仪器条件的限制,在大多数风洞试验中存在大气边界层不完全模拟和仪器响应过慢等问题,但通过合理模拟来流的主要湍流特征和改进采样方法,可以在风洞中较真实地模拟建筑物对大气扩散的影响.     

铝合金冷挤压工艺的优化

本文介绍了6A02、6063铝合金冷挤压试验过程。通过专门装置测试铝合金冷挤压中不同凹模表面粗糙度、挤压速度、润滑剂、坯料状态的下的挤压力,利用正交试验L9(34)得出最优工艺参数。结果表明冷挤压过程中模具表面并非越光越有利于成形,坯料也要针对不同的挤压材料应选用不同的热处理方法。本实验为铝合金冷挤压提供了可行的实验方法和生产依据。     

高速钻削复合材料的切削力

采用多种硬质合金钻头,在高转速和不同进给速度条件下对碳纤维/环氧树脂复合材料进行孔加工正交试验,通过研究其轴向力和扭矩以分析刀具条件和切削参数的适应性.结果表明:主轴转速是影响轴向力和扭矩的最主要因素,高转速钻削时轴向力和扭矩都显著减小;减小进给速度也使轴向力和扭矩减小,但其影响小于主轴转速.此外,钻头材质对轴向力和扭矩的影响大于钻头几何形状和进给速度;进给速度对轴向力的影响较大,而钻头几何形状对扭矩的影响较大.     

Multiple hierarchy risk assessment with hybrid model for safety enhancing of unmanned subscale BWB demonstrator flight test

To explore the low-speed characteristics of the Blended-Wing-Body (BWB) configuration for future civil aircraft, a series of unmanned subscale demonstrators have been developed and tested by our research team. During this process, specific safety risks deriving from uncertain design features, system unreliability, and insufficient personnel experience caused continuous flight test mishaps and the risk mechanism was not clear. Local and trial-and-error learning driven safety improvements took few effects on mishap prevention, so our focus was turned to look for systematic safety strategies. This paper establishes a systems theory based hybrid model to integrate the physical system reliability analysis techniques with the system dynamics method for illustrating the multiple risk interactions of the demonstrator flight test involving organizational, human resource and technical system factors. Using the prior BB-5 demonstrator as a case, the hybrid model simulation represents its historical risk evolution process, which verifies the model rationality. Derived risk control strategies reduced the mishap rate of a new demonstrator called BB-6 Sprit. The paper also shows the extended hybrid model can be applied on safety management of unmanned aerial vehicles from the initial period of vehicle development.     

基于负载变化的超声振子电学性能试验研究

针对超声波加工中振幅衰减和振幅不稳定现象,通过超声振子的静态加载试验,分析了轴向与径向加工负载力对超声振子电学特性的影响规律,以及超声振子电学参数的变化对超声振幅的影响机制。结果表明,超声振子的电学参数在径向负载力与轴向负载力的影响下有相似的变化趋势,即超声振子谐振频率与动态电阻随着负载力的增加而单向增大,动态电感与动态电容有相反的变化趋势,二者的综合效果使谐振频率随着负载力的增加而增大,静态电容在一定范围内波动,当超声振子所受的负载力增大到一定值时,超声振子的低频谐振点会消失。依据理论分析与试验研究结果,提出了改善振幅衰减和振幅不稳定现象的措施。     

Virtual sensing method for monitoring vibration of continuously variable configuration structures using long short-term memory networks

Vibration monitoring by virtual sensing methods has been well developed for linear time-invariant structures with limited sensors. However, few methods are proposed for Time-Varying (TV) structures which are inevitable in aerospace engineering. The core of vibration monitoring for TV structures is to describe the TV structural dynamic characteristics with accuracy and efficiency. This paper propose a new method using the Long Short-Term Memory (LSTM) networks for Continuously Variable Configuration Structures (CVCSs), which is an important subclass of TV structures. The configuration parameters are used to represent the time-varying dynamic characteristics by the “freezing” method. The relationship between TV dynamic characteristics and vibration responses is established by LSTM, and can be generalized to estimate the responses with unknown TV processes benefiting from the time translation invariance of LSTM. A numerical example and a liquid-filled pipe experiment are used to test the performance of the proposed method. The results demonstrate that the proposed method can accurately estimate the unmeasured responses for CVCSs to reveal the actual characteristics in time-domain and modal-domain. Besides, the average one-step estimation time of responses is less than the sampling interval. Thus, the proposed method is promising to on-line estimate the important responses of TV structures.     

带传动实验机的电磁兼容性分析

本文主要对带传动实验机噪声的产生和传播途径进行了全面的分析，从而为设计、安装、调试和使用带传动实验机提供了技术支持。