星箭分离减冲击环结构优化设计

针对星箭分离过程，建立了减冲击环结构模型，并分析了该结构的减冲原理。利用冲击响应谱的时域合成算法计算获得符合冲击谱规范的时域载荷，并以此作为结构优化设计中动力学模型的输入载荷工况。以减冲击环的连续层数、单层支撑块数、连续层厚度、支撑块层高度以及环的外半径和内半径6个结构参数为设计变量，以减冲效果和结构强度、刚度为约束，以质量最轻为目标，建立减冲击环的结构优化设计模型，这是一包含离散变量和连续变量的混合优化问题。为了在跨平台下求解该混合优化问题，采用代理模型策略和自适应模拟退火算法求解，并在最优点处开展结构性能对设计变量的敏度计算，对计算结果进行了分析评估。本研究对强冲击动力学环境下的航天器结构分析与设计有一定的指导意义。     

Unsteady analysis of jet impingement under vibration conditions

The vibration of thermodynamic machinery will affect its cooling system. In this research, a high-resolution simulation of jet impingement was performed to quantify the unsteady turbulent convection under vibration conditions. A newly developed Self-Adaptive Turbulence Eddy Simulation(SATES) method was used. The Reynolds number was Re = 23000, the jet-towall distance was fixed at H/D = 2, and the vibrating frequency of the impinging wall f varied from 0 to 200 Hz. Compared with the static wall c...     

基于矢量化检测联邦滤波的INS/BDS/地磁组合导航容错方法

组合导航能够将多种类型的导航信息进行结合,实现优势互补,因此成为了目前导航应用领域的主要发展方向。然而,导航信息的增多势必会引入更多的风险源,从而降低导航系统的可靠性。基于联邦滤波的容错方法是目前抑制故障信息影响的主要解决手段,但是现有的故障容错方法普遍采用统一的检测机制,没有根据各个导航子系统的误差传播特性针对性地构建故障检测模型,因此会引起较高的误警率与漏检率。针对上述问题,提出了基于矢量化检测联邦滤波的INS/BDS/地磁组合导航容错方法。通过构建面向INS/BDS/地磁不同导航信息的故障检测函数,能够实现更加准确的矢量化信息分配,从而可以有效避免可用导航信息的损失以及故障导航信息对整体系统的影响。仿真结果表明,提出的方法可以有效隔离不同类型的故障信息,并减小其对无故障导航信息及整体系统的影响,从而提高了组合导航的精度和可靠性。     

Nonlinear dynamic analysis of a multi-link manipulator with flexible links-joints mounted on a mobile platform

The present work theoretically demonstrates the dynamic analysis of a planar multi-link manipulator considering flexible links and joints mounted on a moving base. A nonlinear model of a multi-manipulator (N-links) has been developed accounting for an equivalent bi-directional mobile base. The nonlinear Euler-Bernoulli beam and spring-inertia/mass system have been introduced to demonstrate the flexibilities of links and joints, respectively. Modal analysis followed by trajectory analysis has been performed to investigate the behaviors of manipulator taking into account of accurate boundary conditions. Further, vibration characteristics, steady-state responses, and their stability at resonant situations due to joint motions and inertial coupling have been studied. Results of exploiting geometric and inertial coupling due to flexible arms on stability analysis of steady-state responses have been investigated and have been subsequently verified with the findings by directly solving the governing equations. Steady-state response characteristics to explore the dynamics of the multi-link manipulators under resonant states have been studied with the varying actuator mass, the flexibility of links, lifted payload, and joint parameters. The results thus obtained, deliver a useful insight into the position analysis and long-term behavior of multi-link flexible manipulators under harmonic hub-joint motions that shall further enable its proper vibration attenuation and control.     

Experimental study on transfer functions of an active rotor under different flight conditions

Vibrations impose negative impacts on the effectiveness and public acceptance of helicopters. Active rotors with trailing-edge flaps have been proved to be an effective way to actively eliminate helicopter vibrations. For the existing control algorithm based on offline system identification, the transfer functions of an active rotor under different flight conditions are pre-requisites to implement closed-loop vibration control. In this study, a three-bladed active rotor with improved trailing-edge flaps is designed, and wind-tunnel tests are conducted to identify the transfer functions of this active rotor using frequency sweep and phase sweep methods. The experimental results demonstrate that these transfer functions are insensitive to the variation of flight speeds: the amplitude of the transfer function varies slightly, while the phase delay almost remains unchanged. In addition, this finding is validated through closed-loop vibration control tests with the active rotor. The transfer function obtained from the hover test results is also applicable to closed-loop vibration control tests under the forward flight conditions. This will dramatically simplify the implementation and operation of an active rotor.     

基于有限元--离散元耦合的粒子阻尼减振研究

在侧挂构型发射任务中，中心承力筒与卫星直接连接，其动力学特性对卫星的振动响应有直接影响。首先分析中心承力筒的模态特性，据此完成粒子阻尼器的结构参数设计。随后，使用有限元--离散元耦合仿真方法，确定了阻尼器填充粒子的最佳直径和阻尼器最佳安装位置。仿真结果表明，该方案下星箭界面减振效果可达40%。最后，使用最优粒子阻尼参数开展水平激励实验。实验结果表明，与未安装粒子阻尼器相比，中心承力筒+粒子阻尼器组合体的减振效果可达35%以上，与仿真结果一致。     

船载雷达随机振动疲劳寿命分析

振动疲劳作为结构破坏失效形式之一，正日益得到重视。传统的船载雷达设备设计往往仅考虑静强度，从而导致结构抵抗疲劳破坏的能力不足。从模态分析的角度入手，利用模态叠加法进行随机振动分析，得到结构的各向应力功率谱密度。在此基础上进行基于Von Mises应力的谱分析，并分别从宽带和窄带过程的角度进行了疲劳寿命估算，最后对某船载雷达进行了随机振动疲劳分析。结果表明，船载雷达结构在满足静强度条件下，不一定能够满足抗疲劳性能要求。从模态振型分析的角度改进了结构设计，分析验证表明，改进后结构能够满足随机振动疲劳寿命要求。     

推进剂管理装置的可靠性增长及试验验证

采用原始的焊接方式焊接筛网式推进剂管理装置的收集器合格率低、可靠性差。为此,采用纯钛箔作为过渡层进行了不锈钢筛网与钛合金支压板的电阻缝焊试验以及随后这两者与钛合金骨架的电子束焊试验,然后进行了地面力学环境下的振动试验,以验证焊接方式改进后收集器的可靠性。焊接试验结果表明,纯钛箔过渡层一方面可以大幅降低筛网在电阻缝焊时的焊接热量,有效地减小筛网的热变形;另一方面可以在电阻缝焊后形成牢固、封闭的纯钛/不锈钢筛网焊缝过渡区,有效地增加电子束焊时筛网的变形抗力,从而使得焊接后试样的合格率和性能大幅提高。振动试验结果表明,焊接方式改进后收集器的可靠度置信下限从0.90增加到了0.96。     

Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper

This paper explores an analytical model for Elastic Ring Squeeze Film Damper (ERSFD) with thin-walled ring and turbulent-jet orifices, and uncovers its Oil Film Pressure Performance (OFPP). Firstly, the ring deformation is addressed by using the Fourier series expansion approach and the orifice outflow rate is characterized with the Prandtl boundary layer theory. Secondly, applying finite difference scheme, the influence of elastic ring flexibility, orifice diameter, and attitude angle on the OFPP is analyzed. Finally, Outer chamber pressure was measured experimentally at different rotor speeds. The results indicate that the outer chamber pressure coats an individual load-carrying region and spreads symmetrically pertaining to the attitude angle. Its amplitude drops as the elastic ring flexibility decreases but boosts with the reduction of the orifice diameter. For inner chamber pressure, the orifice diameter effects a similar trend to the outer cavity, but exhibits more stable distribution regarding the attitude angle. Minimizing the elastic ring flexibility causes an increase in amplitude. The model is validated by the test results giving that the outer chamber pressure shifts synchronously and periodically with the variation of the attitude angle, while the pressure amplitude increases slightly at higher rotor speeds.     

空间用太阳翼电路部分隔离二极管应用分析

针对空间太阳翼隔离二极管的应用,结合标准规范及太阳翼电路部分的工程设计约束与在轨应用经验,给出了空间太阳翼电路部分隔离二极管的设计方案;结合工程研制经验,给出了不同类型太阳翼电路部分隔离二极管的应用建议,为相关科研人员提供参考。